Summary of the content on the page No. 1
® ®
NuDAQ / NuIPC
PCI-7200 / cPCI-7200
12MB/S High Speed
Digital Input/ Output Card
User’s Guide
Recycled Paper
Summary of the content on the page No. 2
Summary of the content on the page No. 3
©Copyright 1999~2000 ADLINK Technology Inc. All Rights Reserved. Manual Rev. 2.20: October 14, 2000 The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Getting service from ADLINK Customer Satisfaction is always the most important thing for ADLINK Tech Inc. If you need any help or service, please contact us and get it. ADLINK Technology Inc. Web Site http://www.adlink.com.tw http://www.adlinktechnology.com Sales & Service service@adlink.com.tw NuDAQ nudaq@ adlink.com.tw NuDAM nudam@ adlink.com.tw Technical NuIPC nuipc@ adlink.com.tw Support NuPRO nupro@ adlink.com.tw Software sw@ adlink.com.tw TEL +886-2-82265877 FAX +886-2-822
Summary of the content on the page No. 6
Summary of the content on the page No. 7
Table of Contents Chapter 1 Introduction............................................................. 1 1.1 Applications....................................................................1 1.2 Features..........................................................................2 1.3 Specifications .................................................................2 1.4 Software Supporting.......................................................4 1.4.1 Programming Library......................
Summary of the content on the page No. 8
Chapter 5 C/C++ Libraries ....................................................30 5.1 Libraries Installation..................................................... 30 5.2 Programming Guide...................................................... 31 5.2.1 Naming Convention ...................................................................31 5.2.2 Data Types...................................................................................31 5.3 _7200_Initial....................................
Summary of the content on the page No. 9
Summary of the content on the page No. 10
How to Use This Guide This manual is designed to help you use the PCI-7200 and cPCI-7200. The functionality of PCI-7200 and cPCI-7200 are the same except that cPCI-7200 has 4 auxiliary digital input and output. Therefore, the “PCI-7200” represents both PCI-7200 and cPCI-7200 if not specified. The manual describes how to modify various settings on the PCI-7200 card to meet your requirements. It is divided into seven chapters: u Chapter 1, "Introduction," gives an overview of the produc
Summary of the content on the page No. 11
1 Introduction The PCI-7200/cPCI-7200 is PCI/CompactPCI form factor high-speed digital I/O card, it consists of 32 digital input channels, and 32 digital output channels. High performance designs and the state-of-the-art technology make this card suitable for high-speed digital input and output applications. The PCI-7200 performs high-speed data transfers using bus -mastering DMA via 32-bit PCI bus architecture. The maximum data transfer rates can be up to 12MB per second. It is very s
Summary of the content on the page No. 12
1.2 Features The PCI-7200 high-speed DIO Card provides the following advanced features: u 32 TTL digital input channels u 32 TTL digital output channels u Transfer up to 12M Bytes per second u High output driving and low input loading u 32-bit PCI bus, Plug and Play u On-board internal timer pacer clock u Internal timer controls input sampling rate u Internal timer controls digital output rate u ACK and REQ for handshaking u On-board 32-byte FIFO for both digital input and outpu
Summary of the content on the page No. 13
l Input Voltage: Low: Min. 0V; Max. 0.8V High: Min. +2.0V l Input Load: Low: +0.5V @ -0.6mA max. High: +2.7V @+20μA max. l Output Voltage: Low: Min. 0V; Max. 0.5V High: Min. +2.7V l Driving Capacity: Low: Max. +0.5V at 24mA (Sink) High: Min. 2.4V at -3.0mA (Source) u Programmable Counter l Device: 82C54-10, with a 4MHz time base l Timer 0: DI clock source l Timer 1: DO clock source l Timer2: Base clock of Timer #0 and Timer #1 l Pacer Output: 0.0
Summary of the content on the page No. 14
1.4 Software Supporting ADLink provides versatile software drivers and packages for users’ different approach to built-up a system. We not only provide programming library such as DLL for many Windows systems, but also provide drivers for many software ® TM TM TM TM package such as LabVIEW , HP VEE , DASYLab , InTouch , InControl , TM ISaGRAF , and so on. All the software options are included in the ADLink CD. The non-free software drivers are protected with serial licensed code.
Summary of the content on the page No. 15
® 1.4.2 PCIS-LVIEW: LabVIEW Driver ® PCIS-LVIEW contains the VIs, which are used to interface with NI’s LabVIEW software package. The PCIS-LVIEW supports Windows 95/98/NT/2000. The ® LabVIEW drivers are free shipped with the board. You can install and use them without license. For detail information about PCIS-LVIEW, please refer to the user’s guide in the CD. (\\Manual_PDF\Software\PCIS-LVIEW) 1.4.3 PCIS-VEE: HP-VEE Driver The PCIS-VEE includes the user objects, which are used to i
Summary of the content on the page No. 16
TM 1.4.7 PCIS-ISG: ISaGRAF driver The ISaGRAF WorkBench is an IEC1131-3 SoftPLC control program development environment. The PCIS-ISG includes ADLink products’ target drivers for ISaGRAF under Windows NT environment. The PCIS-ISG is included in the ADLINK CD. It needs license. TM 1.4.8 PCIS-ICL: InControl Driver PCIS-ICL is the InControl driver which support the Windows NT. The PCIS-ICL is included in the ADLINK CD. It needs license. 1.4.9 PCIS-OPC: OPC Server PCIS-OPC is an OPC
Summary of the content on the page No. 17
2 Installation This chapter describes how to install the PCI-7200. At first, the content of the package and the unpacking information that you should be careful are described. Because the PCI-7200 is a plug and play device, there is no more jumper or DIP switch setting for configuration. The Interrupt number and I/O port address are assigned by the system BIOS during system boot up. 2.1 What You Have In addition to this User's Manual, the package includes the following items: u PCI-7
Summary of the content on the page No. 18
2.2 Unpacking Your PCI-7200 card contains sensitive electronic components that can be easily damaged by static electricity. The card should be done on a grounded anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same point as the anti-static mat. Inspect the card module carton for obvious damage. Shipping and handling may cause damage to your module. Be sure there are no shipping and handling damages on the module before processing. After openi
Summary of the content on the page No. 19
2.4 cPCI/PCI-7200’s Layout Figure 2.1(a) PCI-7200 Layout Diagram Installation 9 · PCI-7200 Rev A1 CN1 . . . . ALTERA . . . . . . . . . . . . . . . . . . . . . . . . . . . . PCI -Bus . . . . Controller . . . . CN2
Summary of the content on the page No. 20
Figure 2.1(b) cPCI-7200 Layout Diagram 10 Installation ·
