Summary of the content on the page No. 1
DES-3224 10/100 Auto Negotiation
User’s Guide
RECYCLABLE
Printed In Taiwan
6DES3224..02
Rev. A1 (December, 1998)
Switch
Summary of the content on the page No. 2
Hardware : D-Link warrants its hardware products to be free from defects in workmanship and materials, under normal use and service, for the following periods measured from date of purchase from D-Link or its authorized Reseller: Warranty Period Complete Products Spare parts and spare kits Your dealer, or your nearest D-Link office, can advise whether a longer period of warranty applies to your purchase, and if so, can provide you a separate certificate of supplemental warranty. The one-year per
Summary of the content on the page No. 3
D-Link’s sole obligation under this software warranty shall be to replace any defective software product with product that substantially conforms to D-Link’s applicable product documentation. You assume responsibility for the selection of appropriate application and system/platform software and associated reference materials. D-Link makes no warranty that its software products will work in combination with any hardware, or any application or system platform software product provided by any thir
Summary of the content on the page No. 4
No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the United States Copyright Act of 1976. FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
Summary of the content on the page No. 5
Wichtige Sicherheitshinweise Bitte lesen Sie sich diese Hinweise sorgfältig durch. Heben Sie diese Anleitung für den spätern Gebrauch auf. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. Um eine Beschädigung des Gerätes zu vermeiden sollten Sie nur Zubehörteile verwenden, die vom Hersteller zugelassen sind. Das Gerät is vor Feuchtigkeit zu schützen. Bei der Aufstellung des Gerät
Summary of the content on the page No. 6
Summary of the content on the page No. 7
................................ ................................ ................................ ................... i ................................ ................................ ................................ .................. 1 ................................ ................................ ................................ ........................... 1 ................................ ................................ ................................ ...................... 1 1 ....
Summary of the content on the page No. 8
................................ ................................ ................................ ................................ ... 12 ................................ ................................ ................................ ...... 13 ................................ ................................ .......................... 13 5 ................................ ................................ ................................ ................................ .......... 15 Managing
Summary of the content on the page No. 9
................................ ................................ ............. 40 ................................ ................................ .................. 43 ................................ ................................ .... 43 ................................ ................................ ................................ . 47 ................................ ................................ ................... 47 ................................ .............................
Summary of the content on the page No. 10
Summary of the content on the page No. 11
About This Guide Information about the DES-3224 and other D-Link products is available on our web site at . Audience Organization Chapter 1, Introduction DES-3224’s features, LEDs, and management methods are covered. Chapter 2 , Installing DES-3224 Chapter 3, , covers connecting the DES-3224 to the DES-3224s. Chapter 4, Chapter 5, Managing the DES-3224 Chapter 6, , covers troubleshooting the DES-3224. Appendix A, DES-3224 Technical Specifications DES-3224. 1 About This Guide , covers the techni
Summary of the content on the page No. 12
1 backbone or for use with other switches and hubs on a larger network. The topics covered are: • • Panels of the DES-3224 • Management Methods • Features • • The DES-3224 can be configured and customized to your network. • The DES-3224 can be managed in three ways: Local Console Management, Telnet • • Supports Full and Half Duplex for both 10 Mbps and 100 Mbps. . • Wire-speed packet filtering and forwarding for up to 24 ports. • • • • Front Panel Figure 1 2 Introduction , has LEDs that
Summary of the content on the page No. 13
MDI-Uplink port MDI-X ports LED Panel 1 All 24 MDI-X ports on the DES-3224can be used for network connections. You cannot use rear of the DES-3224. Side Panels Figure 2 powered up. There are three holes on each side of the DES-3224. The holes are used for attaching the mounting brackets. 2 3 Introduction : Side Panel Figure , located on the side of the DES-3224. They will come on when the DES-3224 is There are two fans, displayed in monitor the operation and performance of the DES-3224 at a gla
Summary of the content on the page No. 14
circulate and cool the DES-3224. Rear Panel The three pronged power plug, female RS-232 Console port and rear fan are located at the Figure 3 Local Console Management. Three Prong Power Plug RS-232 Port Fan 3 Management Methods • Local Console Management • • connection between a PC and the DES-3224. 4 Introduction documentation for instructions on installing and using D-View and other SNMP applications. and through other vendors’ SNMP applications. Please refer to the appropriate The DES-3224
Summary of the content on the page No. 15
Updating Firmware 5 Introduction , for instructions on updating firmware. Chapter 5 Firmware can be updated quickly and easily. See the section Software Update Menu, 10/100 Auto Negotiation Switch User’s Guide
Summary of the content on the page No. 16
2 Installing the DES-3224 • Unpacking the DES-3224 • • Powering on the DES-3224 Unpacking the DES-3224 • • • • • One six foot (1.82 m) power cord • If any items are missing, contact the retailer where you purchased the DES-3224 for Installation Options There are two options for installing the DES-3224: desktop/ shelf installation or rack • The surface must support 18 lbs or 8 kg. • • • • • • • 6 Installing the DES-3224 RJ-45 connectors as needed Crimpers to crimp cable as needed Wir
Summary of the content on the page No. 17
Desktop/ Shelf Installation 1. Place the four ru 2. Install the DES-3224 on the desktop/shelf where you would like to place it. Rack Installation along with other equipment. Follow these steps to install the DES-3224 on a rack: 1. 2. Sl the rack. 3. Connect the power cord and verify that the DES-3224 is receiving adequate power. Power On plugged in without having any or with all LAN segment cables connected. on when you plug the power cord into the three-pronged power connector. When the DES- su
Summary of the content on the page No. 18
3 Connecting the DES-3224 to the Network • • Ports • Connecting the DES-3224 to another DES-3224 • Cable Specifications Mbps can use lower grade cable than a network running at 100 Mbps., 1 , indicates cable requirements for Ethernet and Fast Ethernet. 1 Do not use telephone cable. Telephone cable does not support Ethernet or Fast Ethernet. • • • • There are two types of cables: straight through and crossover. Category 3, 4, or 5 UTP/STP 8 Connecting the DES-3224 to the Network pin arrange
Summary of the content on the page No. 19
4 for an example of straight through and crossover cable. 2 : Cable Requirements 4 2 9 Connecting the DES-3224 to the Network 100 m (328 ft.) Category 5 STP/ UTP cable 100BASE-TX cable 100 m (328 ft.) 10BASE-T Category 3, 4, or 5 STP/UTP Cable Length Cable Required Ethernet Type : Cable Requirements Table : Cable Diagram Figure shows the cable specifications. Table Figure must use the correct pin arrangement in order for the DES-3224 to work properly. See 10/100 Auto Negotiation Switch User’
Summary of the content on the page No. 20
arrangement. MDI-II port without using a crossover cable. Just make a straight cable, plug it into the 3 , displays the proper cable to use when connecting to various 3 MDI Straight Straight Straight two rows of 12 MDI-X ports. Follow these steps to connect cables to the DES-3224: 1. 2. MDI-X ports. 3. 4. The RS-232 Port is located at the rear of the DES-3224. The RS-232 port is a female port 10 Connecting the DES-3224 to the Network down. Use the RS-232 cable provided to connect the DES-3
