Summary of the content on the page No. 1
DATA SHEET
BROCADE
FASTIRON
SupERx
FAmIly
EntErprisE high p erformance, intelligent
LAn switching
switches For total network
convergence
Businesses continue to strive to be The FastIron Superx/Sx family extends
HIGHLIGHTS
• Industry-leading, chassis-based convergence competitively superior and demand network control from the network edge to the
solution provides a scalable, secure, low-
infrastructures be resilient, secure, and backbone with intelligent network services,
latency and fault
Summary of the content on the page No. 2
The FastIron Superx/Sx family has an the FastIron Superx/Sx family switches The FastIron SX 1600 extensive feature set, making it well suited knowing it is Ipv6-capable hardware today, • up to N+3 system power redundancy for real-time collaborative applications, Ip and that future separately priced software • up to N+3 poE power redundancy telephony, Ip video, e-learning, wireless upgrades will support Ipv6 routing and • up to 384 Class 3 poE ports l ANs, and raising the organization’s advan
Summary of the content on the page No. 3
modular systems that use a common power eliminating system disruption in the event of In addition, the switch management modules supply for both the systems and the poE poE over-subscription or a poE power failure. are available with integrated Gigabit Ethernet equipment. In the FastIron Superx/Sx Customers have the choice of purchasing or 10-Gigabit Ethernet ports. These modules family, the power consumption of a line poE-ready line modules or upgrading provide cost-effective system configur
Summary of the content on the page No. 4
To achieve wire-speed layer 3 performance, user or device authentication, the FastIron Flexible Bandwidth management the FastIron Superx/Sx switches support Superx/Sx switch will apply the appropriate The FastIron Superx/Sx switches support a Brocade Direct Routing (BDR), in which access policy for the user. The access policy rich set of bandwidth management features, the forwarding information base (FIB) is may define the assigned VLAN, QoS, and allowing granular control of bandwidth mai
Summary of the content on the page No. 5
System to process sFlow data from the include: deployment of IPv6 Capable Hardware switches, IronShield 360 provides closed Networks are in the early stages of • The Ipv6-capable FSx management loop threat detection and response. sFlow large-scale Ipv6 production deployment, modules are non-blocking, with a built-in packet samples are scanned for known however few Ipv6 innovative applications switch fabric module and 12 combination threat signatures. upon a positive match, are currentl
Summary of the content on the page No. 6
KEy FEATURES ANd BENEFITS Robust VoIP and Power over Ethernet • Standards-based IEEE 802.3af poE supporting a wide variety of endpoints • Choice of 1250W (70 Class 3) or 2500W (140 Class 3) per poE power supply • Independent system and poE power subsystems allow the addition of poE without affecting the system power • High-availability power design—N+1 poE power redundancy for the 8-slot FastIron Superx and FSx 800 chassis and N+3 poE power redundancy for the 16-slot FSx 1600 chassis • Intelli
Summary of the content on the page No. 7
Advanced Quality of Service • Classification, reclassification, policing, and marking the traffic prior to delivery • Identification, classification, and reclassification based on specific criteria (ACL-based) including port, source/destination mAC address • 802.1p priority bit, source/destination Ip address, Type of Service (ToS), Differentiated Services Control Point (DSCP) fields, or the Transmission Control Protocol/User Datagram protocol (TCp/uDp) port • Flexible queue servicing utilizin
Summary of the content on the page No. 8
BROCAdE FASTIRON SUPERX SPECIFICATIONS IEEE Standards Compliance General Routing protocols • RFC 768 uDp • RFC 783 TFTp • 802.3 10Base-T • RFC 791 Ip • 802.3u 100Base-Tx • RFC 792 ICmp • 802.3u 100Base-Fx • RFC 793 TCp • 802.3u 100Base-lx • RFC 826 ARp • 802.3z 1000Base-Sx/lx • RFC 854 TElNET • 802.3ab 1000Base-T • RFC 894 Ip over Ethernet • 802.3ae 10-Gigabit Ethernet • RFC 903 RARp • 802.3af power over Ethernet • RFC 906 TFTp Bootstrap • 802.3x Flow Control • RFC 1027 proxy ARp • 802.3ad link
Summary of the content on the page No. 9
System management Power Requirements • IronView Network manager (INm) System power Supply • -40 – -60 VDC Consumption (Amps): 36A • Web-based Graphical user Interface (Sx-ACpWR, Sx-DCpWR) • 100 – 120 VAC Consumption (Amps): 14.3A • Embedded Web management • 200 – 240 VAC Consumption (Amps): 7.2A • Industry Standard Command line Interface (ClI) • AC Frequency: 50 – 60Hz • RmON Hp OpenView for Sun Solaris • max BTu: 4874 BTu/Hr • Hp-ux, IBm’s AIx, and Windows NT • max Watts (Output): 1200W • Virtu
Summary of the content on the page No. 10
SySTEm SUmmARy Feature FastIron SuperX FastIron SX 800 FastIron SX 1600 Interface Slots 8 8 16 Backplane Switching Capacity 510 Gbps 600 Gbps 1080 Gbps Data Switching Capacity 408 Gbps 464 Gbps 848 Gbps packet Forwarding Capacity 304 mpps 348 mpps 636 mpps management Redundancy No yes yes Active 10-GbE ports with Redundant management N/A 4 xFp 4 xFp 1 Switch Fabric Redundancy N/A 1+1 1+1 management processor 400 mHz 667 mHz 667 mHz 466 mHz 667 mHz 667 mHz memory Options 256 mB 512 mB 512 mB 512
Summary of the content on the page No. 11
ORdERING INFORmATION Part Number description FI-Sx1-4-AC FastIron Superx bundle with 8-slot chassis, fan tray, and 1 AC power supply FI-Sx1-4-DC FastIron Superx bundle with 8-slot chassis, fan tray, and 1 DC power supply FI-Sx800-AC FastIron Sx 800 bundle with 8-slot chassis, fan tray, 2 switch fabrics, and 1 AC power supply FI-Sx800-DC FastIron Sx 800 bundle with 8-slot chassis, fan tray, 2 switch fabrics, and 1 DC power supply FI-Sx1600-AC FastIron Sx 1600 bundle with 16-slot chassis, fan tray
Summary of the content on the page No. 12
DATA SHEET IPV6-CAPABLE ORdERING INFORmATION Part Number description Sx-FI12Gm-6 management module with 12 combo Gigabit Ethernet ports and 256 mB SDRAm. Software includes Advanced layer 2 and Base layer 3 Ipv4 services. Sx-FI12Gm2-6 management module with 12 combo 10/100/1000 mbps (RJ45)/SFp Gigabit Ethernet ports and 512mB SDRAm. Software includes Advanced layer 2 and Base layer 3 Ipv4 services. Sx-FI12Gm-6-pREm management module with 12 combo 10/100/1000 mbps (RJ45)/SFp Gigabit Ethernet por
