Summary of the content on the page No. 1
AVSW-VGA4X1A
AVSW-VGA8X1A
4 x 1 and 8 x 1 VGA Switches with Audio
Share a VGA display output (monitor, projector,
®
BL A C K B OX
or TV) between multiple device VGA inputs.
Both models have serial and 3.5-mm audio.
Customer Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Support FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,
Information
PA 150
Summary of the content on the page No. 2
FCC and IC RFI Statements and NOM Statement FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in
Summary of the content on the page No. 3
NOM Statement 5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc. 6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante. 7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante. 8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá lo descrito en
Summary of the content on the page No. 4
NOM Statement 18. Servicio por personal calificado deberá ser pr ovisto cuando: A: El cable de poder o el contacto ha sido dañado; u B: Objectos han caído o líquido ha sido derramado dentro del aparato; o C: El aparato ha sido expuesto a la lluvia; o D: El aparato parece no operar normalmente o muestra un cambio en su desempeño; o E: El aparato ha sido tirado o su cubierta ha sido dañada. Page 4 724-746-5500 | blackbox.com
Summary of the content on the page No. 5
Trademarks Used in this Manual Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Xbox is a registered trademark of Microsoft Corporation. Wii is a registered trademark of Nintendo of America, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. 724-746-5500 | blackbox.com Page 5
Summary of the content on the page No. 6
Table of Contents Table of Contents 1. Specifications ............................................................................................. 7 2. Overview ............................................................................................. 8 2.1 Introduction ....................................................................................... 8 2.2 Features ............................................................................................. 8 2.3 What’s Inclu
Summary of the content on the page No. 7
Chapter 1: Specifications 1. Specifications Maximum Video Resolution — 1920 x 1080, WUXGA (1920 x 1200) Number of A/V Inputs — Video: AVSW-VGA4X1A: (4); AVSW-VGA8X1A: (8); Audio: AVSW-VGA4X1A: (4); AVSW-VGA8X1A: (8) Number of A/V Outputs — Video: (1); Audio: (1) Remote Control Support — Yes Serial Control Support — Yes Enclosure — Metal User Controls — AVSW-VGA4X1A: (4) push buttons; AVSW-VGA8X1A: (4) push buttons, (1) “S” button, (1) EDID copy button, Connectors
Summary of the content on the page No. 8
Chapter 2: Overview 2. Overview 2.1 Introduction The 4- and 8-Port VGA Switches enable users to quickly and easily share a single VGA display with several sources from your device inputs to one output device (monitor, projector, or TV). You can select the desired input source via the remote control within the range of 15 feet (5 m) or by using a push button on the switch. Because you don’t need to plug and unplug video sources, it’s more convenient, more affordable, and more efficient to us
Summary of the content on the page No. 9
Chapter 2: Overview AVSW-VGA8X1A: • 8 x 1 VGA Video Switch with Audio • Universal power supply with power cord • IR remote control • Serial cable (DB9 F to 2.5-mm plug) • 19" rackmount kit wth mounting hardware • (1) set of foot pads • Screw pack • This user’s manual For both models, you might also need: • Audio cable (EJ110) • 6-ft. (1.8-m) VGA Cable (M-to-M) for VGA A/V source connection (EVNPS06). 2.4 Hardware Description 2.4.1 AVSW-VGA4X1A Front and Back Panels Figure 2-1 shows the front pa
Summary of the content on the page No. 10
Chapter 2: Overview 5 6 7 8 9 10 Figure 2-2. AVSW-VGA4X1A back panel. Table 2-1. AVSW-VGA4X1A components. Number Component Description 1 LEDs Lights when the corresponding input is selected. 2 Push buttons Press to select input 1, 2, 3, or 4. 3 LED Lights when power is on. 4 Sensor IR sensor accepts remote control signal. 5 Barrel connector Connects to power. 6 DCE 2.5-mm serial control port. 7 3.5-mm connector Links to audio out. 8 3.5-mm connectors L
Summary of the content on the page No. 11
Chapter 2: Overview 2.4.2 AVSW-VGA8X1A Front and Back Panels Figure 2-3 shows the front panel of the AVSW-VGA8X1A. Figure 2-4 shows the back panel. Table 2-2 describes its components. 2 5 3 4 1 Figure 2-3. AVSW-VGA8X1A front panel. 6 7 8 9 10 11 12 Figure 2-4. AVSW-VGA8X1 back panel. 724-746-5500 | blackbox.com Page 11
Summary of the content on the page No. 12
Chapter 2: Overview Table 2-2. AVSW-VGA8X1A components. Number Component Description 1 LEDs Lights when the corresponding input is selected. 2 Push buttons Press to select input 1, 2, 3, 4. 3 LED Lights when power is on. Press and hold the “S” button, then press the “K1” button to select Port 5. Press and hold the “S” button, then press the “K2” button to select Port 6. 4 S button Press and hold the “S” button, then press the “K3” button to select Port 7. Press and hold the “S” button, then pres
Summary of the content on the page No. 13
Chapter 3: Installation 3. Installation Before installation, power off all devices that will be connected to this system. Make sure that all devices you will connect are properly grounded. Place cables away from fluorescent lights, air conditioners, and machines that are likely to generate electrical noise. NOTE: If no screen displays, follow these steps: 1. Make sure the device cables are correctly and firmly attached. 2. Set your display device’s input source as VGA. 3. Check the PC BIOS conf
Summary of the content on the page No. 14
Chapter 3: Installation Table 3-1. Connection pattern, AVSW-VGA4X1A. Number Component Description 1 Power supply Apply the proper power to the unit. 2 Video output Connects to the display. 3 Video source (input) Connects to the video source. 4 Serial connector Plug the serial cable in here. 3.2 Installation Steps 1. Use a video cable (VGA) to connect the display to the video output port on the back of the switch. Plug a set of audio jacks from the speaker to the switch’s speaker port. 2. Use
Summary of the content on the page No. 15
Chapter 4: Operation (AVSW-VGA4X1A) 4. Operation (AVSW-VGA4X1A) 4.1 Front-Panel Indicators and Push Buttons Figure 4-1. AVSW-VGA4X1A. Table 4-1. Front-panel indicators. Product Code Indicator Description Power LED Lights green when the video switch is powered on. AVSW-VGA4X1A Video Port LEDs 1–4 Lights yellow when the corresponding video port is selected. Table 4-2. Front-panel push buttons. Product Code Push Buttons Description AVSW-VGA4X1A (4) Video source Press the corresponding button to sel
Summary of the content on the page No. 16
Chapter 4: Operation (AVSW-VGA4X1A) Figure 4-2. Remote control. 4.3 Serial Control The video switch’s built-in serial interface allows users to control the switch through a PC, serial controller devices, or home theater systems. Configure the controller’s serial port as shown below: Baud Rate: 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: None Page 16 724-746-5500 | blackbox.com
Summary of the content on the page No. 17
Chapter 4: Operation (AVSW-VGA4X1A) To select a source device via serial interface, select the number that corresponds to the port it is connected to (see Figure 4-3). Figure 4-3. Serial interface screen. NOTE: Use a DB9F-to-2.5-mm cable for the serial connection. 724-746-5500 | blackbox.com Page 17
Summary of the content on the page No. 18
Chapter 5: Operation (AVSW-VGA8X1A) 5. Operation (AVSW-VGA8X1A) 5.1 Front-Panel Indicators and Push Buttons To select Source Ports 1–4, simply press the corresponding front-panel button (K1–K4) on the switch. To select Source Port 5, press and hold the “S” button on the switch, then press K1 to select Port 5. To select Source Port 6, press and hold the “S” button on the switch, then press K2 to select Port 6. To select Source Port 7, press and hold the “S” button on the switch, then press K
Summary of the content on the page No. 19
Chapter 5: Operation (AVSW-VGA8X1A) Table 5-3. Single-color (yellow) LEDs next to buttons 1–8. LED Number Color Description 1 Yellow The video port on Source 1 is selected. 2 Yellow The video port on Source 2 is selected. 3 Yellow The video port on Source 3 is selected. 4 Yellow The video port on Source 4 is selected. 5 Yellow The video port on Source 5 is selected. 6 Yellow The video port on Source 6 is selected. 7 Yellow The video port on Source 7 is selected. 8 Yellow The video port on Source
Summary of the content on the page No. 20
Chapter 5: Operation (AVSW-VGA8X1A) Figure 5-1. Remote control. Page 20 724-746-5500 | blackbox.com
