Summary of the content on the page No. 1
CONSOLE
CONSOLE
User Manual
CE-250
Read this guide thoroughly and follow the installation and operation
procedures carefully in order to prevent any damage to the units and/or
any devices that connect to them.
This package contains:
1 CE-250L KVM Extender Local Unit
1 CE-250R KVM Extender Remote Unit
1 CS Custom KVM Cable
2 Power Adapters
1 User Manual
1 Quick Start Guide
If anything is damaged or missing, contact your dealer.
®
© Copyright 2002 ATEN International Co., Ltd.
Manual Pa
Summary of the content on the page No. 2
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. However, there is no guarantee that interferen
Summary of the content on the page No. 3
Overview Because the CE-250 KVM Extender System allows access to a computer system from a remote console (keyboard, monitor, and mouse), it is perfect for factory and construction sites, or any type of installation where the console needs to be in a conveniently accessible location, but you want the system equipment to reside in a safe place - away from dust, dirt, and harsh environmental influences. The CE-250 System is also useful for control and security purposes, where you can have the syste
Summary of the content on the page No. 4
Features Built-in ASIC for Greater Reliability and Compatibility Category 5 Ethernet Cable to Connect the Local and Remote Units - Up To 150 m Apart Dual Console Operation - Control Your System From Both the Local and Remote PS/2 Keyboard, Mouse, and Monitor Consoles Push Button Selection of the Active Console High Resolution Video - Up To 1280 x 1024 Supports VGA, SVGA, and Multisync Monitors Local Monitor Supports DDC; DDC2; DDC2B Automatic Gain Control - Automatically Adjusts
Summary of the content on the page No. 5
Computers The following equipment must be installed on each computer that is to be connected to the system: With PS/2 Type Connectors: A VGA, SVGA or Multisync card. A 6-pin mini-DIN mouse port A 6-pin mini-DIN keyboard port With AT Type Connectors: A VGA, SVGA or Multisync card. A DB-9 (standard serial), mouse port plus mouse adapter (part # 2A-105).* A 5-pin DIN (standard AT), keyboard port plus keyboard adapter (part # 2A-106).* * Not included - requires separate purchase. Cab
Summary of the content on the page No. 6
CONSOLE Components The Local Unit (CE-250L) Front View: 1 2 3 4 7 5 6 1. Operating Mode Selection Switch Pressing this button toggles between the operating mode choices: Local: only the local console can control the system(s); Auto: both consoles can control the system(s). 2. LEDs The Local Unit has two LEDs to indicate the operating status of the Local and Remote units (see p. 9, for details). 3. Mouse Port The local PS/2 mouse plugs into this connector. 4. Keyboard Port The local PS/2 keyb
Summary of the content on the page No. 7
CPU The Local Unit (CE-250L) Rear View: 1 2 3 1. Monitor Port The HDB-15 Video connector of the KVM cable that connects to the computer’s Video port plugs into this connector. 2. Keyboard Port The Keyboard connector of the KVM cable that connects to the computer’s Keyboard port plugs into this connector. 3. Mouse Port The Mouse connector of the KVM cable that connects to the computer’s Mouse port plugs into this connector. Note: If you are combining the CE-250 with a KVM switch, the KVM cable co
Summary of the content on the page No. 8
CONSOLE The Remote Unit (CE-250R) Front View: 1 2 3 6 4 5 1. LEDs The Remote Unit has two LEDs (Power and On Line) to indicate the operating status of the Local and Remote units (see p. 9, for details). 2. Mouse Port The remote PS/2 mouse plugs into this connector. 3. Keyboard Port The remote PS/2 keyboard plugs into this connector. 4. Monitor Port The remote monitor plugs into this connector. 5. Remote I/O The Category 5 twisted pair cable that connects back to the Local Unit plugs into this co
Summary of the content on the page No. 9
Installation Setting up the KVM Extender System is simply a matter of plugging in the cables: 1. Make sure that all the equipment to be connected up is powered Off. 2. Plug the cables from the local console devices (mouse, keyboard, monitor), into their ports on the Console side of the Local Unit (CE-250L). 3. Plug the appropriate connectors on the KVM cable supplied with this unit into the CPU side of the CE-250L. Each connector is marked with an appropriate icon to indicate which it is. Note:
Summary of the content on the page No. 10
CO NSOLE CONSOLE CPU CE-250L FrontView CE-250L Rear View CE-250R - 8 - 2002-12-16 AC 9V REMOTE I /O AC 9V REMOTE I /O
Summary of the content on the page No. 11
Operation The Local and Remote Units each have two LEDs to indicate their operating status, as shown in the tables, below: CE-250L (Local Unit): Operating Mode LED Local Auto Local Lights to indicate that the 1. Lights when the local console is local console is active active (the Remote LED is out) (the Remote LED is out). 2. Turns off when the remote console is active (the Remote LED turns on) 3. Flashes on and off alternately with the Remote LED when neither console is active. Remote The LED
Summary of the content on the page No. 12
Troubleshooting Symptom Action No Video Make sure that all cables are securely plugged into their sockets. TP Wiring Diagram PAIR 3 PAIR 2 PAIR 1 PAIR 4 1 2 34 56 78 W-O O W-G Bl W-Bl G W-Br Br JACK POSITIONS T568B AT&T 258A TP Pin Assignments Pin Assignment 1 V OUT B 2 /V OUT B 3 V OUT G 4 V OUT R 5 /V OUT R 6 /V OUT G 7 /DO 8 DO - 10 - 2002-12-16
Summary of the content on the page No. 13
Specifications Function CE-250L CE-250R Connectors Keyboard 2 x 6 pin mini-DIN female 6 pin mini-DIN female Mouse 2 x 6 pin mini-DIN female 6 pin mini-DIN female Monitor 1 x 15 pin HDB male 1 x 15 pin HDB female 1 x 15 pin HDB female 8P8C Jack Unit To Unit LEDs 1 Local 1 Power On 1 Remote 1 On Line N/A Function Keys Local/Auto Select button 150m [500’] (max.) Cable Length 1280 x 1024; DDC; DDC2; DDC2B* Video Resolution Power Consumption AC 9V 2.7W (max.) AC 9V 4.0W (max.) Plastic Housing Weight
Summary of the content on the page No. 14
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose. The dir
Summary of the content on the page No. 15
Notes: - 13 - 2002-12-16
Summary of the content on the page No. 16
Notes: - 14 - 2002-12-16
