Summary of the content on the page No. 1
Master View
CPU Switch
CS-102/CS-122
Packing Checklist
All brand names and trademarks are the registered property of their respective owners.
Printed in Taiwan 08/95
Manual Part No. PAPE-0135-100
® International Co., Ltd. Aten ©Copyright 1995
damage to the CS-102/CS-122 and/or the devices it connects to.
Please read this manual thoroughly and follow the installation procedures carefully to prevent any
1 User's Manual
1 CS-102 or CS-122 CPU Switch
User's Manual
Summary of the content on the page No. 2
Introduction Features CS-102/CS-122 Front and Rear Views Easy Hot Key Control is Compatible With Normal Keyboard Operation. Saves Space, Equipment, and Power Costs. Through Powered On Computers - Scan Rate is DIP Switch Selectable. Scan Mode Automatically Switches When Switching Among Computers. Num Lock, Scroll Lock States Automatically Saved and Restored Caps Lock, Auto Scan and Manual Selection. Power-free Operation. Cascadable. Three Stage Buzzer Sounds for Switching Confirmation. Simple
Summary of the content on the page No. 3
Specifications Function Specification Power Consumption DC 9V 160mA (max.) PC Connections 2 PC Selected By Keyboard/Button LEDs 1 Power 2 Ready 2 Select Scan Interval 3, 10, 20, 40 Sec. + * Keyboard Connector 5-pin DIN , 6-pin mini-DIN Mouse Connector 9-pin D Type Male/Female * PS/2 Mouse Connector 6-pin mini-DIN Female Monitor Connector 15-pin D Type Female/Male Enclosure Plastic and Metal W 1150g Dimensions (L x W x H) 224 x 152 x 52 (mm) + * CS-122 CS-102 eight CS-122 Side View
Summary of the content on the page No. 4
Installation A 1. Set . 2. 3. 4. Add a power adapter if the CPU Switch works abnormally. Use either port per computer. are for PS/2style keyboard sockets. SWITCH with appropriate cables. 5-pin DIN connectors are for AT style keyboard sockets; 6-pin mini-DIN connectors of the computer to either of the PC ports on the CPU Connect the monitor output port, mouse port, and keyboard port ON DIP switch 4 to Fig. A One Stage Installation enables one CS-102 or CS-122 to control up to two computers,
Summary of the content on the page No. 5
Two Stage Installation 1. Set 2. 3. 4. 1. 2. 3. cable. cascaded operation, connect PS/2 mouse ports of successive stages using a 6-pin mini-DIN male-to-male For PS/2 users: You must connect a PS/2 mouse, because a serial mouse can not replace a PS/2 mouse. For Neither the PC1 or PC2 port of a CS-102 or CS-122 can be connected to a CS-104 or CS-106. Add a power adapter if the CPU Switch works abnormally. Note: To connect the keyboard ports of two CPU Switches, use the 5-pin DIN ports only.
Summary of the content on the page No. 6
1. Set 2. 3. 4. 1. 2. 3. cable. cascaded operation, connect PS/2 mouse ports of successive stages using a 6-pin mini-DIN male-to-male For PS/2 users: You must connect a PS/2 mouse, because a serial mouse can not replace a PS/2 mouse. For Neither the PC1 or PC2 port of a CS-102 or CS-122 can be connected to a CS-104 or CS-106. Add a power adapter if the CPU Switch works abnormally. Note: To connect the keyboard ports of two CPU Switches, use the 5-pin DIN ports only. Use either keyboard
Summary of the content on the page No. 7
Operation For a The , , and 1. [ 2. [ 3. [ Alt # represents the port number that the computer you wish to access is attached to. Where Enter] +Ctrl+Shift]+#+[ stage port, enter this combination: With Direct Port Selection you can access any powered on computer on the installation directly. To directly select a first Direct Port Selection: Space To end Previous/Next Mode, press: RightShift To select the next port, press: LeftShift To select the previous port, press: Alt+Ctrl+Shift]
Summary of the content on the page No. 8
[ # # [ # # # 4. Results For Correct Hot Keys* Filters out the Hot Keys and beeps once Scans powered on computers one by one and flashes corresponding LED Scan rate is set by the DIP switch of the 1st stage CS-104 Pressing the Space bar stops this mode Filters out the Hot Keys and beeps once Prev/Next [ RightShift] selects a higher numbered computer [ LeftShift] selects a lower numbered computer Pressing the Space bar stops this mode Filters out the Hot Keys and beeps once for
Summary of the content on the page No. 9
Appendix LEDs Ready Power LED: Lights when the CPU Switch is running. Ready LED: Lights when the connected PC or CPU Switch is running. Port Select LED: Lights to indicate the currently selected port. Condition Pattern 1 2 3 4 5 DIP Switch Setting . DIP Switch Number Scan Time 1 2 3 4 ON ON X ON 3 Sec. OFF ON X ON 10 Sec. ON OFF X ON 20 Sec. OFF OFF X ON 40 Sec. connect to is the First Stage unit. * The CPU Switch that the keyboard, monitor, and mouse Off DIP switches are set to units, all D
Summary of the content on the page No. 10
Troubleshooting Symptom Action 1st stage CS-102/CS-122 does not Incorrect DIP Switch settings. Set the First Stage CS-102/CS-122 DIP Switch 4 to ON ; for all other take Hot Keys. (cascaded) CS-102 units, set DIP Switch 4 to OFF . Pressing Hot Keys gets no CS-102/CS-122 is in Scan Mode or Press the Spacebar to exit Scan Mode or Previous/Next Mode. response. Previous/Next Mode. Selected port connects to a Change the port selection to a powered on computer. powered off computer. Improper keyboard r
Summary of the content on the page No. 11
