Summary of the content on the page No. 1
®
SUPER
SUPERSERVER 6014H-8
SUPERSERVER 6014H-82
SUPERSERVER 6014H-X8
USER’S MANUAL
1.0a
Summary of the content on the page No. 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. SUPERMICRO COMPUTER reserves the right to make changes t
Summary of the content on the page No. 3
Preface Preface About This Manual This manual is written for professional system integrators and PC techni- cians. It provides information for the installation and use of the Super- Server 6014H-8/6014H-82/6014H-X8. Installation and maintainance should be performed by experienced technicians only. The SuperServer 6014H-8/6014H-82/6014H-X8 is a high-end, dual proces- sor server based on the SC813S-500 1U rackmount server chassis and the X6DHR-8G/X6DHR-8G2/X6DHR-X8G serverboard, which supports s
Summary of the content on the page No. 4
SUPERSERVER 6014H-8/6014H-82/6014H-X8 Manual Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 6014H-8/6014H-82/6014H-X8. Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X6DHR-8G/X6DHR-8G2/ X6DHR-X8G serverboard, including the locations and functions of connec- tors, headers and jumpers. Refer to this chapte
Summary of the content on the page No. 5
Preface Notes v
Summary of the content on the page No. 6
SUPERSERVER 6014H-8/6014H-82/6014H-X8 Manual Table of Contents Preface About This Manual ...................................................................................................... iii Manual Organization ................................................................................................... iii Chapter 1: Introduction 1-1 Overview......................................................................................................... 1-1 1-2 Serverboard Features .........
Summary of the content on the page No. 7
Table of Contents Power ........................................................................................................ 3-3 3-4 SCSI Drive Carrier LEDs ............................................................................... 3-3 Chapter 4: System Safety 4-1 Electrical Safety Precautions ....................................................................... 4-1 4-2 General Safety Precautions ......................................................................... 4-2 4-3 ESD Pre
Summary of the content on the page No. 8
SUPERSERVER 6014H-8/6014H-82/6014H-X8 Manual Power LED/Speaker .............................................................................. 5-18 Wake-On-Ring ........................................................................................ 5-18 Wake-On-LAN ........................................................................................ 5-18 Power Fault ............................................................................................ 5-19 SMB Connector ................
Summary of the content on the page No. 9
Table of Contents Chapter 7: BIOS 7-1 Introduction...................................................................................................... 7-1 7-2 Running Setup................................................................................................. 7-2 7-3 Main BIOS Setup............................................................................................. 7-2 Main BIOS Setup Menu ........................................................................... 7-3 7-4 Ad
Summary of the content on the page No. 10
SUPERSERVER 6014H-8/6014H-82 Manual Notes x
Summary of the content on the page No. 11
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The Supermicro SuperServer 6014H-8/6014H-82/6014H-X8 is a high-end dual processor, 1U rackmount server that features some of the most ad- vanced technology currently available. The 6014H-8/6014H-82/6014H-X8 is comprised of two main subsystems: the SC813S-500 1U rackmount chassis and the X6DHR-8G/X6DHR-8G2/X6DHR-X8G dual processor serverboard. Please refer to our web site for information on operating systems that have been certified for
Summary of the content on the page No. 12
SUPERSERVER 6014H-8/6014H-82/6014H-X8 Manual One (1) CD-ROM containing drivers and utilities SuperServer 6014H-8/6014H-82/6014H-X8 User's Manual * "B" indicates black. 1-2 Serverboard Features At the heart of the SuperServer 6014H-8/6014H-82/6014H-X8 lies the TM X6DHR-8G/X6DHR-8G2/X6DHR-X8G, a dual Intel Xeon processor serverboard designed to provide maximum Processors The X6DHR-8G/X6DHR-8G2/X6DHR-X8G supports single or dual Intel 604- pin Xeon EM64T processors at an 800 MHz FSB speed. Please
Summary of the content on the page No. 13
Chapter 1: Introduction PCI Expansion Slots The 6014H-8 has two Universal PCI-X 133 MHz/PCI-Express x8/x4 slots. Two riser cards included with the server support the use of one standard size and one low-profile PCI-X cards. (PCI-Express riser cards are op- tional.) The 6014H-82 has two Universal PCI-X 133 MHz/PCI-Express x8/x4 slots. Two riser cards included with the server support the use of one standard size and one low-profile PCI-X cards. (PCI-Express riser cards are op- tional.) The 6014H
Summary of the content on the page No. 14
SUPERSERVER 6014H-8/6014H-82/6014H-X8 Manual Figure 1-1. E7520 Chipset Block Diagram Processor 1 Processor 2 PCI-X Slot DDR 266 (8 DIMMs) DDR 333-4DIMM Double-sided SCSI 7902 DDR 333-6DIMM Single-sided PCI-X PCI-E ZCR DDR333/ PXH DIMMs 1- x8 266 E7520 4 PCI-X Slot PCI-X133 Lindenhurst DIMMs 5- MCH DDR333/ 8 266 PCI-Ex8 PCI-E Slot Hub PCI-Ex8 PCI-E Slot IDE PRI/ UDMA/100 PCI-33MHz VGA SEC 6300 ESB SATA SATA 0,1 Hance GLAN PCI-66MHz 82541 Rapids USB USB 0-3 LPC Bus BMC Flash xBus LPC I/O C
Summary of the content on the page No. 15
Chapter 1: Introduction 1-3 Server Chassis Features The SC813S-500 is one of Supermicro's third-generation 1U chassis and features four hot-swap SCSI hard drive bays, a slim CD-ROM drive, a slim 3.5" floppy drive and a revolutionary cooling design that can keep today's most powerful processors running well below their temperature thresholds. The following is a general outline of the main features of the SC813S-500 chassis. System Power When configured as a SuperServer 6014H-8/6014H-82/6014H-X8,
Summary of the content on the page No. 16
SUPERSERVER 6014H-8/6014H-82/6014H-X8 Manual Cooling System The SC813S-500 chassis' revolutionary cooling design has been optimized to provide sufficient cooling for dual Xeon configurations. The SC813S-500 includes two heavy duty 10-cm blower fans located in the middle of the chassis. If either one of these fans breaks down, the overheat/fan fail LED on the chassis control panel will begin flashing. All chassis and power supply fans operate continuously. A setting in BIOS (see p. 7-17) is use
Summary of the content on the page No. 17
Chapter 1: Introduction 1-4 Contacting Supermicro Headquarters Address: SuperMicro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: SuperMicro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands Tel: +31 (0) 73-6400390 Fax: +31 (0) 73-6416525 Email: sales@supermicro.nl (General I
Summary of the content on the page No. 18
SUPERSERVER 6014H-8/6014H-82/6014H-X8 Manual Notes 1-8
Summary of the content on the page No. 19
Chapter 2: Server Installation Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperServer 6014H-8/6014H-82/6014H-X8 up and running. Following these steps in the order given should enable you to have the system operational within a minimum amount of time. This quick setup assumes that your 6014H-8/ 6014H-82/6014H-X8 system has come to you with the processors and memory preinstalled. If your system is not already fully integrate
Summary of the content on the page No. 20
SUPERSERVER 6014H-8/6014H-82/6014H-X8 Manual Choosing a Setup Location - Leave enough clearance in front of the rack to enable you to open the front door completely (~25 inches). - Leave approximately 30 inches of clearance in the back of the rack to allow for sufficient airflow and ease in servicing. Warnings and Precautions! ! ! Rack Precautions - Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full weight of the rack resting on
