Summary of the content on the page No. 1
5850U_Hyo1-4.fm Page 1 Thursday, December 23, 2004 12:47 PM
U
HTR-5850/HTR-5840
AV Receiver
© 2005 All rights reserved.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
OWNER'S MANUAL
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROIS
Summary of the content on the page No. 2
01EN_HTR-5850_U.book Page i Tuesday, January 18, 2005 7:25 PM IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 10 Ventilation – Slots and openings in the cabinet are provided CAUTION for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these RISK OF ELECTRIC SHOCK openings must not be blocked or covered. The openings DO NOT OPEN should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This
Summary of the content on the page No. 3
01EN_HTR-5850_U.book Page ii Tuesday, January 18, 2005 7:25 PM IMPORTANT SAFETY INSTRUCTIONS d) If the product does not operate normally by following 24 Outdoor Antenna Grounding – If an outside antenna or the operating instructions. Adjust only those controls cable system is connected to the product, be sure the antenna that are covered by the operating instructions as an or cable system is grounded so as to provide some improper adjustment of other controls may result in protection again
Summary of the content on the page No. 4
01EN_HTR-5850_U.book Page iii Tuesday, January 18, 2005 7:25 PM CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this 14 Do not attempt to modify or fix this unit. Contact manual carefully. Keep it in a safe place for future qualified YAMAHA service personnel when any reference. service is needed. The cabinet should never be opened for any reasons. 2 Install this sound system in a well ventilated,
Summary of the content on the page No. 5
BASIC SOUND FIELD ADVANCED ADDITIONAL INTRODUCTION PREPARATION OPERATION PROGRAMS OPERATION INFORMATION 01EN_HTR-5850_U.book Page 1 Tuesday, January 18, 2005 7:25 PM CONTENTS INTRODUCTION SOUND FIELD PROGRAMS FEATURES............................................................. 2 SOUND FIELD PROGRAM GETTING STARTED............................................ 3 DESCRIPTIONS...............................................51 Supplied accessories .................................................
Summary of the content on the page No. 6
01EN_HTR-5850_U.book Page 2 Tuesday, January 18, 2005 7:25 PM FEATURES FEATURES Built-in 6-channel power amplifier Sophisticated AM/FM tuner Minimum RMS output power ◆ 40-station random and direct preset tuning ◆ Automatic preset tuning [ HTR-5850 ] ◆ Preset station shifting capability (preset editing) (0.06% THD, 20 Hz to 20 kHz, 8 Ω ) XM Satellite Radio Front: 90 W + 90 W Center: 90 W ◆ XM Satellite Radio programming (using the “XM Surround: 90 W + 90 W Connect and Play digital antenna”, s
Summary of the content on the page No. 7
INTRODUCTION 01EN_HTR-5850_U.book Page 3 Tuesday, January 18, 2005 7:25 PM GETTING STARTED GETTING STARTED Supplied accessories Please check that you received all of the following parts. Remote control CODE SET TRANSMIT SYSTEM Batteries (4) 75-ohm/300-ohm antenna POWER POWER STANDBY POWER AM loop antenna TV AV adapter (U.K. model only) (AAA, R03, UM-4) CD MD/CD-R TUNER SLEEP DVD DTV/CBL V-AUX MULTI CH IN VCR AMP TV VOL TV CH VOLUME TV MUTE TV INPUT MUTE STEREO MUSIC ENTERTAIN MOVIE 1 2 3 4 S
Summary of the content on the page No. 8
01EN_HTR-5850_U.book Page 4 Tuesday, January 18, 2005 7:25 PM CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel 13 2456 7 8 9 0 A (U.S.A. model) VOLUME STANDBY /ON PRESET/TUNING FM/AM A/B/C/D/E l PRESET/TUNING/CH h MEMORY TUNING MODE SEARCH MODE XM CATEGORY DISPLAY EDIT NEXT LEVEL MAN'L/AUTO FM AUTO/MAN'L MONO INPUT STRAIGHT l PROGRAM h PHONES SPEAKERS VIDEO AUX A B INPUT MODE MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE VIDEO L AUDIO R SILENT CINEMA BD C EF G HI
Summary of the content on the page No. 9
INTRODUCTION 01EN_HTR-5850_U.book Page 5 Tuesday, January 18, 2005 7:25 PM CONTROLS AND FUNCTIONS 0 VIDEO AUX jacks Input audio and video signals from a portable external source such as a game console. To reproduce source signals from these jacks, select V-AUX as the input source. A VOLUME Controls the output level of all audio channels. This does not affect the REC OUT level. B PHONES (SILENT CINEMA) jack Outputs audio signals for private listening with headphones. When you connect headph
Summary of the content on the page No. 10
01EN_HTR-5850_U.book Page 6 Tuesday, January 18, 2005 7:25 PM CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the 1 Infrared window remote control used to control this unit. To operate other Outputs infrared control signals. Aim this window at the components, see “REMOTE CONTROL FEATURES” on component you want to operate. page 65. 2 CODE SET Use to set up remote control codes (see page 66). 1 0 3 Input selector buttons CODE SET TRANSMIT 2 A SYST
Summary of the content on the page No. 11
INTRODUCTION 01EN_HTR-5850_U.book Page 7 Tuesday, January 18, 2005 7:25 PM CONTROLS AND FUNCTIONS A STANDBY Using the remote control Sets this unit in the standby mode. B SYSTEM POWER The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote Turns on the power of this unit. control sensor on the main unit during operation. C SLEEP Sets the sleep timer. VOLUME D MULTI CH IN STANDBY /ON CATEGORY PRESET/TUNING FM/AM A/B/C/D/E l PRESET/TU
Summary of the content on the page No. 12
01EN_HTR-5850_U.book Page 8 Tuesday, January 18, 2005 7:25 PM CONTROLS AND FUNCTIONS Front panel display 12 345 6 78 90 AB 96 VCR V-AUX DTV/CBL DVD MD/CD-R TUNER CD t 24 VIRTUAL SILENT CINEMA YPAO HD AUTO TUNED STEREO MEMORY MUTE VOLUME MATRIX DISCRETE SP q DIGITAL A B HiFi DSP STANDARD Z ZONE2 ONE2 NIGHT X XM M P PTY TY H HOLD OLD P PS S PTY PTY RT RT C CT T EON EON SLEEP dB q EX q PL ft 96/24 LC R q PL q PL x DUAL mS LFE SL SB SR PCM dB C D EG HI JM KL F 1 Decoder indicators 0 MEMORY ind
Summary of the content on the page No. 13
INTRODUCTION 01EN_HTR-5850_U.book Page 9 Tuesday, January 18, 2005 7:25 PM CONTROLS AND FUNCTIONS K 96/24 indicator Lights up when a DTS 96/24 signal is input to this unit. L LFE indicator Lights up when the input signal contains the LFE signal. M Input channel indicators/speaker indicators Indicate the channel components of the current digital input signal. Indicate the number of speakers connected in SPEAKERS (page 24), or indicate the channel being adjusted in SP LEVEL (page 59). 9
Summary of the content on the page No. 14
01EN_HTR-5850_U.book Page 10 Tuesday, January 18, 2005 7:25 PM CONTROLS AND FUNCTIONS Rear panel 123 4 5 6 7 TUNER 75Ω UNBAL. SYSTEM CONNECTOR COMPONENT VIDEO PR PB Y DVD FM AM ANT GND ANT MULTI CH INPUT AUDIO VIDEO R L R L VIDEO S VIDEO XM DIGITAL DTV/ OUTPUT CBL MD/CD-R FRONT DVD AC OUTLETS SWITCHED MONITOR OUT DTV/ OPTICAL SURROUND CBL SUB CENTER WOOFER MD/CD-R IN VCR SPEAKERS DVD CD OUT R FRONT L R SURROUND L + – – – – + + + A DTV/CBL IN (PLAY) MD/ CD-R VIDEO S VIDEO OUT SUB (REC) W
Summary of the content on the page No. 15
PREPARATION 01EN_HTR-5850_U.book Page 11 Tuesday, January 18, 2005 7:25 PM SPEAKER SETUP SPEAKER SETUP Speaker placement * The speaker layout below shows the standard ITU-R Surround speakers (SR and SL) speaker setting. You can use it to enjoy CINEMA DSP The surround speakers are used for effect and surround and multi-channel audio sources. sounds. Place these speakers behind your listening position, facing slightly inwards, about 1.8 m (6 ft) above * ITU-R is the radio communication sec
Summary of the content on the page No. 16
01EN_HTR-5850_U.book Page 12 Tuesday, January 18, 2005 7:25 PM SPEAKER SETUP Speaker connections 5 Tighten the knob to secure the wire. Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are 3 faulty, no sound will be heard from the speakers, and if the 4 polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. 5 CAUTION If you will use 4 or 6 ohm speakers, be sure to set this unit’s spe
Summary of the content on the page No. 17
PREPARATION 01EN_HTR-5850_U.book Page 13 Tuesday, January 18, 2005 7:25 PM SPEAKER SETUP Front speakers (A) Subwoofer system Right Left Surround speakers Right Left 1 23 67 (HTR-5850 U.S.A. model) SYSTEM CONNECTOR SPEAKERS FRONT SURROUND R L R L + – – + + – – + A SUB WOOFER B OUTPUT + – – + + – – + CENTER SURROUND BACK 4 5 Front speakers Center (B) speaker Surround back speaker ■ FRONT terminals Connect one or two speaker systems (2, 3) to these terminals. If you use only one speaker
Summary of the content on the page No. 18
01EN_HTR-5850_U.book Page 14 Tuesday, January 18, 2005 7:25 PM CONNECTIONS CONNECTIONS Dust protection cap Before connecting components Pull out the cap from the optical jack before you connect the fiber optic cable. Do not discard the cap. When you are not using the optical jack, be sure to put the cap back in CAUTION place. This cap protects the jack from dust. Do not connect this unit or other components to the mains power until all connections between components are complete. ■ Cable
Summary of the content on the page No. 19
PREPARATION 01EN_HTR-5850_U.book Page 15 Tuesday, January 18, 2005 7:25 PM CONNECTIONS ■ Video jacks This unit has three types of video jacks. Connection depends on the availability of input jacks on your monitor. [HTR-5850 only] The signals input through the S VIDEO jacks on HTR- 5850 are automatically converted for output through the VIDEO jacks. When V. CONV. is set to ON (see page 59), signals input through the VIDEO jacks can be output through the S VIDEO jacks. COMPONENT VIDEO S VID
Summary of the content on the page No. 20
01EN_HTR-5850_U.book Page 16 Tuesday, January 18, 2005 7:25 PM CONNECTIONS Connecting video components ■ Connections for DVD playback Note For HTR-5840, be sure to connect your video source components in the same way you connect your video monitor to HTR-5840. For HTR-5850, be sure to connect your video source components in the same way you connect your video monitor to HTR-5850 if VIDEO CONV. (see page 59) is set to OFF. (Even when V.CONV is set to OFF, S-video signals input from your vide
