Summary of the content on the page No. 1
SRCD909
INSTRUCTION MANUAL
Summary of the content on the page No. 2
WARNING WARNING To prevent fire or shock hazard, do not use this plug with an extension cord, receptacle other outlet unless the blades can be fully inserted to present blade exposure. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. The lightning flash with arrowhead WARNING: The exclamation point within an Symbol, within an equilateral TO REDUCE THE equilateral triangle is intended to Triangle, is intended to alert the RISK OF ELECTRIC SHOCK, alert th
Summary of the content on the page No. 3
TABLE OF CONTENTS This instruction manual is important to you. Please read it. This manual tells exactly how to connect, operate and adjust this unit for best performance. It shows simple things to do and check before you call for help and saves the cost of unnecessary service and call out charges. TABLE OF CONTENTS----------------------------------------------------------------------------------2 CONNECTING TO MAINS SUPPLY---------------------------------------------------------------
Summary of the content on the page No. 4
LOCATION OF CONTROLS 1.CD COMPARTMENT 2. EJECT/OPEN button 3. VOLUME+/- button 4. POWER SWITCH button 5. P.EQ button 6. TUNER/BAND button 7. CD FUNCTION button 8. PLAY/PAUSE button 9.REVERSE SKIP/SEARCH TUNE DOWN button FORWRD SKIP/SEARCH TUNE UP button 10.MENU button 15 11. MEM.UP/REPEAT button 12. MEMORY/CLOCK button 13. STOP button 14. PHONES 15.Remote Control SENSOR REMOTE CONTROL 1. POWER button TUNER/ 2. VOLUME+/- button CD BAND 8 9 DOWN UP PLAY/ PAUSE 3. PLAY/PAUSE button 11 3 M-
Summary of the content on the page No. 5
REMOTE CONTROL AND BATTERY INSTALLATION BATTERY Insert 2pcs AAA size (Alkaline) batteries (not included) into the battery compartment of the remote control. Be sure to observe the polarity markings, which are engraved inside the battery compartment, then close the cover. BATTERY REPLACEMENT When the batteries become too weak. The operating distance of the remote controls greatly reduced and you will need to replace the batteries. Open the battery compartment cover, push out t
Summary of the content on the page No. 6
RADIO OPERATION Operation Press the power button to turn the unit on. Press the Tuner button to change the radio mode. Then press the Tuner/Band button to select FM or AM. You can hold the Tuning / Search Forward or REW button to select a desired station. If you hold the Tuning/search Forward or REW button for more than half a second the unit will begin to automatically scan until a strong signal is found or until the Tuning/Search Forward or REW button is pressed again. Press AM
Summary of the content on the page No. 7
or high temperatures for extended periods. Long exposure to high temperatures can warp the disc. Do not stick paper or write anything with a ballpoint pen in the label side of the disc. LOADING AND UNLOADING COMPACT DISCS Press the Power button to turn the unit on. Select the CD function by pressing the CD button. CD plays automatically, when you inject the CD in the unit under CD mode. Eject the disk at any time by first pressing the stop button and then pressing the EJECT button.
Summary of the content on the page No. 8
To temporarily stop disc play(pause mode), press the PLAY/PAUSE button. Disc play will stop at the current play position. The track playing time will flash. To resume disc play, press the PLAY/PAUSE button again. TRACK SKIP STARTING DISC PLAY FROM THE BEGINNING OF A PARTICULAR TRACK Press the Tuning/Search Forward or REW buttons to select the desired track. The number of the selected track will be shown on the CD display. It will plays automatically. TO SKIP TO THE NEXT TRACK
Summary of the content on the page No. 9
disc play will resume from that point. When the last track has finished playing, the CD will stop. FOR REPEAT DISC PLAY OF ONE OF THE TRCKS Press the Memory Up/Repeat button once. REPRAT will flash. Press the Play/Pause button. The selected track will then begin playing through to its end. At which point it will automatically return to the beginning of that track. This will continue until the Stop button is pressed. If the Repeat button is pressed twice, REPEAT will disappear, repeat
Summary of the content on the page No. 10
The Program memory will also be cleared if the disc compartment is opened, if the function is changed , or if the power is switched off. CLOCK SETTING Switch the unit to standby mode by pressing the Power button. Press the Memory button for 4 seconds, the hour digit will flash in the display. Using the CD skip up/down buttons set the required hour (Note clock uses 12 Hour format). Press the Memory button again the Hour is now set and the Minute digits start to flash in the display
Summary of the content on the page No. 11
TECHNICAL SPECIFICATIONS Power supply AC----------------------------------------------------------------------------------------120V 60HZ Radio frequency coverage FM----------------------------------------------------------------------------------------87.5~108MHZ AM----------------------------------------------------------------------------------------530~1710KHZ CD player Pick up------------------------------------------------------------------------------------3-beam, Semi-conducto
