Summary of the content on the page No. 1
XL-S10(U) TINSEA018SJZZ
1
Thank you for purchasing this SHARP product.
To obtain the best performance from this product,
please read this manual carefully. It will guide you in
operating your SHARP product.
MICRO COMPONENT SYSTEM
XL-S10 Micro Component System consisting of XL-S10
(main unit) and CP-S10 (speaker system).
MODEL
XL-S10
OPERATION MANUAL
03/12/18 XL-S10(U)_FRONT.fm
TINSEA018SJZZ
Summary of the content on the page No. 2
XL-S10 SPECIAL NOTES NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in- terference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to ra- CAUTION: TO REDUCE THE RISK OF ELECTRIC S
Summary of the content on the page No. 3
XL-S10 IMPORTANT SAFETY INSTRUCTIONS 1 Read Instructions - All the safety and operating instructions should 10 Ventilation - Slots and openings in the cabinet are provided for venti- be read before the product is operated. lation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or cov- 2 Retain Instructions - The safety and operating instructions should be ered. The openings should never be blocked by placing the product o
Summary of the content on the page No. 4
XL-S10 IMPORTANT SAFETY INSTRUCTIONS (continued) 15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this is connected to the product, be sure the antenna or cable system is product through openings as they may touch dangerous voltage points grounded so as to provide some protection against voltage surges and or short-out parts that could result in a fire or electric shock. Never spill built-up static charges. Arti
Summary of the content on the page No. 5
Accessories Contents XL-S10 Please confirm that the following accessories are included. Page ! General Information Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8 ! Preparation for Use System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 10 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
XL-S10 Precautions ! General Hold the AC power plug by the head when re- " Please ensure that the equipment is positioned in a well-venti- moving it from the AC outlet, as pulling the " lated area and that there is at least 4" (10 cm) of free space along cord can damage internal wires. the sides and back. There must also be a minimum of 8" (20 cm) of free space on the top of the unit. " Do not remove the outer cover, as this 4" (10 cm) 4" (10 cm) may result in electric shock. Refer internal 8
Summary of the content on the page No. 7
Controls and indicators XL-S10 1 Reference page 1. CD Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 1 9 2. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 11 3. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4. Bass/Treble Selector Button . . . . . . . . . . . . . . . . . . . . . . . . 12 10 2 5. Function Selector Button . . . . . . . . . . . . . . . . . . 14, 18, 20, 23 6. Memory/Set Button .
Summary of the content on the page No. 8
XL-S10 Controls and indicators (continued) 1. Full-Range Speaker 2. Speaker Wire Reference page 1 3. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 11 4. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 11 5. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6. CD Fast Reverse, Tuning Down Button . . . . . . . . . . . . 15, 18 2 7. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 9
XL-S10(U) TINSEA018SJZZ 2 System connections XL-S10 Make sure to unplug the AC power cord before any connec- tions. 2 FM AM loop antenna antenna ! Antenna connection Connect the FM/AM loop antenna to the ANTENNA jack. Position the FM antenna wire and rotate the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, or attach it to a stand or a wall. Right speaker Left speaker Notes: " Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place th
Summary of the content on the page No. 10
XL-S10 System connections (continued) ! Placing the speaker system ! Connecting the AC power cord There is no distinction between the right and the left speakers. After checking all the connections have been made correctly, plug the AC power cord of this unit into the wall socket. Left speaker Right speaker Note: Unplug the unit if it will not be used for a prolonged period of time. ! To turn the power on Press the POWER ON/STAND-BY button to turn the power on. To set the unit to the stand-b
Summary of the content on the page No. 11
Remote control XL-S10 Notes concerning use: ! Battery installation " Replace the batteries if the operating distance is reduced or if the Use 2 "AAA" size batteries (UM-4, R03, HP-16 or similar). operation becomes erratic. 2 Batteries are not included. " Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth. 1 Remove the battery cover. " Exposing the sensor on the unit to strong light may interfere with 2 Insert the batteries according to the direc
Summary of the content on the page No. 12
XL-S10 Sound control ! Adjusting the volume Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned counterclockwise, the volume will decrease. Remote control operation: Press the VOLUME + button to increase the volume and the VOL- UME - button to decrease the volume. ..... 0 1 2 28 29 30 ! Adjusting the bass Main unit operation: 1 Press the BASS/TREBLE button to select "BASS". 2 Within 5 seconds, turn the VOLUME control to adjust the bass.
Summary of the content on the page No. 13
Setting the clock XL-S10 3 Within 1 minute, press the PRESET ( or ) button to ad- just the hour and then press the MEMORY button. 3 When the 12-hour display is selected, "AM" will change auto- matically to "PM". 4 Within 1 minute, press the PRESET ( or ) button to ad- This may be operated only with the remote control. just the minutes and then press the MEMORY button. In this example, the clock is set for the 12-hour (AM 12:00) display. 1 Press the CLOCK button and within 5 seconds, press the ME
Summary of the content on the page No. 14
XL-S10 Listening to a CD This system can play audio CDs, and CD-R/RW discs but can not 1 Press the ON/STAND-BY button to turn the power on. record CDs. Some audio CD-R and CD-RW discs may not be playable due to the 2 Press the FUNCTION button until "Cd dISC" appears on the state of the disc or the device that was used for recording. display. When operating with the remote control, press the CD button. 3 Press the CD EJECT button to open the CD compart- ment. 4 Place a CD on the spindle, la- b
Summary of the content on the page No. 15
XL-S10 To interrupt playback: " To locate the beginning of a track Main unit operation: To move to the beginning of the next track: Press the button. To resume playback from the same point, press Press the button for less than 0.5 seconds during playback. the button again. ! You can skip to any track by pressing the Remote control operation: button repeatedly until the desired track Press the button. number appears. 4 To resume playback from the same point, press the button. To stop pl
Summary of the content on the page No. 16
XL-S10 Listening to a CD (continued) Notes: " Repeat or Random play ! The random play will stop automatically when all tracks are You can select one of the CD playback mode; "Repeat play", "Ran- played once. (The same track will not be played back twice.) dom play" and "Normal play". ! In random play, the CD player will select and play tracks auto- 1 When in the CD mode, press the RANDOM/REPEAT button matically. (You cannot select the order of the tracks.) on the remote control repeatedly to s
Summary of the content on the page No. 17
Programmed play XL-S10 You can choose up to 32 selections for playback in the order you 1 While in the stop mode, press the or button to select like. the desired track. 4 Selected track number 2 Press the MEMORY (MEMORY/SET) button to save the track number. Playback order 3 Repeat steps 1 - 2 for other tracks. Up to 32 tracks can be programmed. 4 Press the ( ) button to start playback. To clear the programmed selections: Press the CLEAR button while the "MEMORY" indicator is lit. Each time th
Summary of the content on the page No. 18
XL-S10 Listening to the radio 1 Press the ON/STAND-BY button to turn the power on. 2 Press the FUNCTION button until "FM" or "AM" appears on the display. When operating with the remote control, press the TUNER (BAND) button to select "FM" or "AM". 3 Press the TUNING ( or ) button to tune in to the desired station. Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0.5 sec- onds, scanni
Summary of the content on the page No. 19
Listening to the memorized station XL-S10 " Memorizing a station " To recall a memorized station You can store 40 AM and FM stations in memory and recall them at Press the PRESET ( or ) button for less than 0.5 seconds to the push of a button. (Preset tuning) select the desired station. 1 Perform steps 1 - 3 in "Listening to the radio" on page 18. 2 Press the MEMORY/SET (MEMORY) button to enter the preset tuning saving mode. Preset channel Frequency and frequency band 5 3 Within 5 seconds, pre
Summary of the content on the page No. 20
XL-S10 Listening to a cassette tape Before playback: 1 Press the ON/STAND-BY button to turn the power on. ! For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not rec- 2 Press the FUNCTION button until "TAPE" appears on the ommended.) display. ! Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. When operating with the remote control, press the TAPE but- ! Before loading a tape into the cassette compartment, ton. tighten the sl
