Korg TONEWORKS AX3000G user manual

Summary of the content on the page No. 1

EasyStart





Main Features
Main Features


Korg’s REMS modeling technology delivers 72

realistic classic and modern amp, cabinet and effects
models

16 types of drive & amp models cover everything

from vintage overdrive to high-gain metal

11 types of pre-effect, cabinet, modulation, delay and
reverb modeled effects deliver a broad sound palette

Transform your guitar with pickup, acoustic body and
top, plus synth modeling effects
32 preset programs are

Summary of the content on the page No. 2

AX3000G EasyStart Cable and Guitar Connections Cable and Guitar Connections 1. Use audio cables to connect the L/MONO and R OUTPUT jacks to a mixer/recorder. For headphones, plug into the PHONES jack. When connecting to a mono device i.e. guitar amp, use the L/MONO output only. 2. After making audio output and AC connections, connect your guitar to the INPUT jack on the rear panel. 3. Raise the MASTER level to adjust the volume as you play. Output Connection settings Output Connect

Summary of the content on the page No. 3

AX3000G EasyStart 2. Press either the BANK UP or BANK DOWN switch to select “BANK 2”. (When you’re selecting a bank, the bank number will flash in the BANK display). 3. Press the PROGRAM SELECT 3 switch. Program “2-3” will be displayed in the LCD instantly. The PROGRAM SELECT 3 switch LED will light and the Bank Display will indicate 2, and stay lit. ! If the LED in the upper left of the Bank Up switch is lit green, Individual Mode is selected. Press the BANK UP switch to choose Program

Summary of the content on the page No. 4

AX3000G EasyStart ESS (Expression Step Sequencer) The AX3000G features an Expression Step Sequencer (ESS), which automatically controls most effect parameters in a fixed or random step function. You can assign up to eight steps of effect parameter values in the step sequencer, and specify one of seven ways in which the sequencer will play back these steps: Forward, Backward, Alternate 1/2, Random, Forward (one- shot), and Alternate 1/2 (one-shot). This lets you create sounds with compl

Summary of the content on the page No. 5

AX3000G EasyStart Step 2 has been changed from -9 to -8, and step 5 from 3 to 4 (this changes it to a major arpeggio) The ESS settings are as follows: SMOOTH STEPMODE STEP1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 0 7-A -12 -8 -5 0 4 7 12 Pitch shifter: Pitch=0, Fine=0, tracking=80, direct=0.0, effect=7.0 Delay: 2 Tap Delay Time: 756, Feedback 4.4, Tone 7.9, Tap Time 5.0, Mix 4.4 Reverb: Slap… Time=7.7, Lo Damp 3.7, High Damp 5.4, Pre Delay 0, Mix 4.5 T Th he e C Co