Summary of the content on the page No. 1
NX-F3_NX-F7[US]-frontcover.fm Page 1 Tuesday, September 30, 2008 10:58 AM
COMPACT COMPONENT SYSTEM
NX-F7
Consists of CA-NXF7,
SP-NXF7F and SP-NXF7W
NX-F3
Consists of CA-NXF3,
SP-NXF3F and SP-NXF3W
INSTRUCTIONS
LVT1833-010B
[US, UA, UW, UG, UX]
English
Summary of the content on the page No. 2
NX-F3_NX-F7[US].book Page 1 Friday, February 15, 2008 4:50 PM Warnings, cautions and others CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION — F button! Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus, ensure that the plug is easily accessible. The F button in any position does not disconnect the mains lin
Summary of the content on the page No. 3
NX-F3_NX-F7[US]-gpage.fm Page 2 Friday, March 14, 2008 1:26 PM CAUTION — Proper Ventilation To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Top/Front/Back/Sides: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain adequate air path for ventilation by placing on a stand with a height of 10 cm more. In addition, maintain the best possible air circulation. Front view of t
Summary of the content on the page No. 4
NX-F3_NX-F7[US]-01.fm Page 1 Friday, March 14, 2008 2:42 PM Table of contents Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. Introduction Playing back sources from external devices Part description .............................3 Using the remote control ..............4 Playing back sources from Inserting the batteries into the remote external
Summary of the content on the page No. 5
NX-F3_NX-F7[US]-01.fm Page 2 Thursday, May 22, 2008 2:14 PM Convenient functions of Operating external devices disc/file playback using the remote control Convenient functions of disc/file Operating external devices using playback .......................................31 the remote control .......................57 Playing back a disc/file in the desired order Operating a TV using the remote control ......57 (Program playback) ....................................31 Operating a DBS using th
Summary of the content on the page No. 6
NX-F3_NX-F7[US]-02.fm Page 3 Thursday, April 3, 2008 1:20 PM Part description The numbers refer to the pages in which the parts are explained. Front view Refer to “Display window” shown below. Remote control sensor [K2] is printed on NX-F7. * [SURROUND] is printed on NX-F3 instead. Rear view Cooling fan The voltage selector is located on the rear of the main unit sold in countries/areas other than * Thailand. Display window 3 Introduction
Summary of the content on the page No. 7
NX-F3_NX-F7[US]-02.fm Page 4 Friday, March 14, 2008 1:37 PM Using the remote control The numbers refer to the pages in which the parts are explained. Inserting the batteries into the remote control Insert the batteries into the remote control by matching the polarity (+ and −) correctly. R03 (UM-4)/AAA (24F) type dry-cell batteries (supplied) • If the range or effectiveness of the remote con- trol decreases, replace both batteries. Operating the system from the remote control Point th
Summary of the content on the page No. 8
NX-F3_NX-F7[US].book Page 5 Friday, February 15, 2008 4:50 PM Preparation Do not connect the power cable until all other connections have been made. FM antenna (supplied) Connecting the antennas FM antenna Main unit (rear view) AM loop antenna (supplied) Setting up the AM loop antenna Stretch out the FM antenna to the best position for radio reception. When radio reception with the supplied FM antenna is poor, or when using a communal antenna Main unit (rear view) Antenna cable Comm
Summary of the content on the page No. 9
NX-F3_NX-F7[US]-03.fm Page 6 Tuesday, September 30, 2008 10:38 AM Connecting the speakers and subwoofer Connect the speakers to the main unit by connecting the colored connectors to the same color terminals on the rear of the main unit. Right speaker Left speaker Red White Main unit (rear view) (rear view) (rear view) Speaker cable Speaker cable Gray Blue Purple Subwoofer Speaker cable (rear view) CAUTION ■ IMPORTANT • The supplied speakers are manufactured exclu- • Improper speaker cable co
Summary of the content on the page No. 10
NX-F3_NX-F7[US]-03.fm Page 7 Wednesday, March 5, 2008 2:32 PM Preparation (continued) Do not connect the power cable until all other connections have been made. Using the speakers with commercially available speaker stands The left and right speakers can be fitted onto commercially available speaker stands. Before fitting the speak- ers onto commercially available speaker stands, follow the instructions shown below. Left and right speakers for NX-F7 Left and right speakers for NX-F3 Detach th
Summary of the content on the page No. 11
NX-F3_NX-F7[US]-03.fm Page 8 Wednesday, March 19, 2008 3:58 PM Connecting a TV with the Connecting a TV [COMPONENT] terminals After connecting a TV, follow the instructions on pages 11 and 12. TV ■ IMPORTANT Main unit • Connect the main unit directly to a TV (or a mon- (rear view) itor) without routing through a video cassette recorder (VCR). Otherwise picture distortion may occur during playback. (Routing the con- nection through a VCR, however, does not affect the audio quality.) Mai
Summary of the content on the page No. 12
NX-F3_NX-F7[US]-03.fm Page 9 Wednesday, March 19, 2008 3:58 PM Preparation (continued) Do not connect the power cable until all other connections have been made. Connecting a TV with the [HDMI Connecting external digital MONITOR OUT] terminal audio devices This system can output uncompressed digital video signals to a TV compatible with HDMI (High Output MD player or Definition Multimedia Interface). satellite receiver TV Main unit To an optical digital (rear view) output terminal To a
Summary of the content on the page No. 13
NX-F3_NX-F7[US]-03.fm Page 10 Wednesday, April 2, 2008 4:24 PM Connecting external analog Selecting the voltage for audio devices your area (Only for countries/ areas other than Thailand) Output Analog audio Before connecting the power cable to an AC outlet, device you must set the correct voltage for your area. Slide the voltage selector on the main unit to the correct voltage for your area. • Confirm that the position of the voltage selector corresponds to the voltage in your area. Au
Summary of the content on the page No. 14
NX-F3_NX-F7[US].book Page 11 Tuesday, March 4, 2008 2:43 PM Preparation (continued) Do not connect the power cable until all other connections have been made. 1 Turn on the main unit. Selecting the video signal • Refer to “Turning on/off the main unit” on page 13. type 2 Press [DVD 3] or [USB 3]. To view an image on the TV screen, select the • When a disc is loaded or a USB device is video signal type correctly according to the TV connected, press 7 to stop playback. after connecting t
Summary of the content on the page No. 15
NX-F3_NX-F7[US]-03.fm Page 12 Friday, February 29, 2008 11:24 AM NOTE • “480”, “576”, “720” and “1080” refer to the num- ber of the scanning lines. Generally, the larger the number, the better picture that can be obtained. • “I” refers to the interlaced format. “P” refers to the progressive format. A better picture can be obtained in the progressive format than in the interlaced format. • When an HDMI video signal is output, the “HDMI” indicator lights up in the display window. • When
Summary of the content on the page No. 16
NX-F3_NX-F7[US].book Page 13 Friday, February 15, 2008 4:50 PM Basic operations Turning on/off the main unit Press [AUDIO F] (or [STANDBY F] on the main unit). • The power of the main unit turns on and the Number [STANDBYF] lamp (button) on the main unit buttons * turns off. • Press [AUDIOF] (or [STANDBYF] on the Remote control main unit) again to turn off the power of the main mode selector (Only for NX-F7) unit. (The main unit enters the standby mode.) • With the power off, pressin
Summary of the content on the page No. 17
NX-F3_NX-F7[US]-04.fm Page 14 Tuesday, April 29, 2008 3:17 PM Enhancing the playback Adjusting the volume level sound (K2) (Only for NX-F7) for surround/subwoofer sound The K2 function is designed to provide natural sound by improving the playback sound from low- You can adjust the volume level for the left and bit-rate digital sources. right surround sound and the subwoofer sound The function compensates for sound waves dissi- respectively. pated during digital recording compression to
Summary of the content on the page No. 18
NX-F3_NX-F7[US]-04.fm Page 15 Tuesday, February 19, 2008 11:05 AM Basic operations (continued) Selecting the headphone Selecting the surround surround mode volume level You can listen to surround sound via headphones You can increase the surround volume level. connected to the [PHONES] terminal. This function is effective for the following condi- tions: ■When headphones are connected to the (1) When the surround mode is set to an item [PHONES] terminal other than “AUTO SUR” (Refer to pag
Summary of the content on the page No. 19
NX-F3_NX-F7[US]-04.fm Page 16 Wednesday, April 2, 2008 4:27 PM For the locations of the remote control buttons, refer to page 13. Using the sleep timer Changing the brightness of the display window When the time you specify elapses, the main unit automatically turns off. ■When the main unit is turned on Press [SLEEP]. Press [DIMMER] repeatedly. • Each time you press [SLEEP], the time indicated in • Each time you press [DIMMER], the brightness the display window changes. You can set th
Summary of the content on the page No. 20
NX-F3_NX-F7[US].book Page 17 Friday, February 15, 2008 4:50 PM Listening to radio broadcasts Setting the AM tuner spacing AM stations are spaced 9 kHz apart in some coun- tries and 10 kHz in other countries. Number buttons * Remote control mode selector ■When the main unit is turned off To select 10 kHz spacing, while holding down ¢, press F on the main unit to turn on the power. “10K STEP” appears in the display win- dow. To select 9 kHz spacing, while holding down 4, press F on the m
