Summary of the content on the page No. 1
MICRO COMPONENT SYSTEM
UX-S77 —Consists of CA-UXS77 and SP-UXS77
—
CA-UXS77 SP-UXS77
DIGITAL
INSTRUCTIONS
GVT0131-010A
[US/UN]
g
English
Summary of the content on the page No. 2
Warnings, Cautions and Others CAUTION—STANDBY/ON button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The STANDBY/ON button in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY/ON lamp lights in red. • When the unit is turned on, the STANDBY/ON lamp lights in green. The power can be remote controlled. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, cov
Summary of the content on the page No. 3
Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows 1. Front:No obstructions and open spacing. 2. Sides/ Top/ Back:No obstructions should be placed in the areas shown by the dimensions below. 3. Bottom:Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more. Front view Side view 15 cm 15 cm 1 cm 1 cm 15 cm 15 cm 15 cm 10 cm CA-UXS77 SP-UXS77 CA-UXS7
Summary of the content on the page No. 4
IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE UNIT. G-3
Summary of the content on the page No. 5
Contents Introduction ............................................................2 Advanced Tape Operations .................................32 Precautions ..........................................................................2 Recording on a Tape .........................................................32 How to Read This Manual ..................................................2 Synchronized Disc Recording...........................................33 Getti
Summary of the content on the page No. 6
Introduction • If you are not going to operate the System for an extended Precautions period of time, unplug the AC power cord from the wall Installation outlet. • Install in a place which is level, dry and neither too hot nor If anything goes wrong, unplug the AC power cord and too cold—between 5°C and 35°C. consult your dealer. • Install the System in a location with adequate ventilation to prevent internal heat buildup in the System. How to Read This Manual DO
Summary of the content on the page No. 7
Getting Started Step 1: Unpack Step 1:Unpack the package and check the accessories. After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM loop antenna (1) • Remote control (1) • Composite video cord (1) • Batteries (2) • AC plug adaptor (1) If any item is missing, consult your dealer immediately. Step 2: Prepare the Remote Control Insert the batteries into the remote
Summary of the content on the page No. 8
Step 3: Hook Up If you need more detailed information, see page 6. Illustrations of the input/output terminals below are typical examples. When you connect other components, refer also to their AM loop antenna (supplied) manuals since the terminal names actually printed on the rear Turn it until the best reception is obtained. may vary. Turn the power off to all components before connections. VCR, etc. AUDIO OUT White AUX Red OPTICAL DIGITAL IN DECODER VIDEO INPUT Red PR Blue PB Green
Summary of the content on the page No. 9
NTSC VIDEO OUT PAL SELECTER LOW HIGH VOLTAGE SELECTOR 220V— 230V 127V 110V VIDEO S-VIDEO For better FM/AM reception AM loop antenna Keep it connected. Vynile-covered wire (not supplied) Outdoor FM Extend it horizontally. antenna (not supplied) Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector (IEC or DIN45325). FM antenna (supplied) Extend it so that you can obtain the best reception. 5 English AUTO REVERSE PUSH OPEN
Summary of the content on the page No. 10
To assemble and connect the AM loop antenna To connect the speaker cords To assemble the AM loop antenna Connect the right speaker to the RIGHT terminals, and the left speaker to the LEFT terminals. 1 Open 2 Insert 3 Close When connecting the speaker cords, match the polarity of To connect the AM loop antenna the speaker terminals: • For LOW terminals: Red cord to (+) and black cord to (–). 1 Hold 3 Release • For HIGH terminals: Grey cord to (+) and blue cord to (–) The speakers are m
Summary of the content on the page No. 11
DVD OPTICAL DIGITAL OUT PCM/STREAM To connect the AV COMPU LINK cords Adjusting the Voltage Selector This system allows you to use JVC’s TV with simple Use a screwdriver to slide the voltage selector so that the operations; by starting playing back a disc, the TV voltage marker is pointing at the same voltage as where you automatically turns on and changes the input mode to the are plugging in the unit. (See also the back cover page.) appropriate position so that you can
Summary of the content on the page No. 12
Before Operating the System DVD Video—digital audio formats Playable Disc Types The System can play back the following digital audio This unit has been designed to play back the following discs: formats. • Linear PCM: Uncompressed digital audio, the same Region Video format used for CDs and most studio masters. Disc Type Mark (Logo) Code* Format Number • Dolby Digital: Compressed digital audio, developed by Dolby Laboratories, which enables multi-channel enc
Summary of the content on the page No. 13
5-DVD Parts Index Refer to the pages to see how to use the buttons and controls. Remote control STANDBY/ON AUDIO SUB TITLE ANGLE 1 2 3 12, 36 ZOOM VFP DISPLAY 19 4 5 6 7, 13, 15, 18, 22 – 24, 29 – 31, 41, 42 3D PHONIC DVD LEVEL SET 8 9 13, 18, 19, 35, 36 7 RETURN PROGRESSIVE PAGE + CANCEL 16, 19, 25, 35 10 0 10 TOP MENU MENU 15 15 ENTER 15, 18, 19, 23, 25, 28, 31, 35, 37, 41 SET UP ON SCREEN 37, 38, 41 28 12, 13 23 12, 16, 32 12, 14, 25 DISC 33 REC MODE 14 14, 23, 25 14, 16,
Summary of the content on the page No. 14
Display Indicators The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. WMA MP3 1DISC REC 123 ALL MONO REC GR.SLEEP A.STANDBY 3D PHONIC ST PRGM RAND BONUS B.S.P 1 Disc tray indicators 8 Repeat mode indicators • 1-5: Disc tray number indicators. •: lights when Repeat mode is activated. • (tray indicator): •1 DISC ALL A-B GR.: – Lights
Summary of the content on the page No. 15
Indications on the main display while operating a disc While playing back a disc: While disc play is stopped: • DVD Video: • DVD Video: Chapter no. Elapsed playing time Total title no. 12 3 4 5 12 3 4 5 • By pressing DISPLAY, you can show the current title and chapter numbers for a few seconds. • DVD Audio: • DVD Audio: Group no. Track no. Elapsed playing time Track no. 12 3 4 5 12 3 4 5 • By pressing DISPLAY, you can show the current group and track numbers for a few seconds. • Audio C
Summary of the content on the page No. 16
Daily Operations—Playback In this manual, the operation using the remote control is mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks. 10 keys 1 SET 1 Turn on the power. 3D PHONIC RETURN The STANDBY/ON lamp on the main unit lights in green. TOP MENU MENU • Without pressing STANDBY/ON , the System ,, , ENTER turns on by pressing one of the source selecting buttons in the next step. 2 DISC SELECT
Summary of the content on the page No. 17
Remote Listening to the Radio ONLY To preset the stations To select the AM tuner interval spacing You can preset 30 FM and 15 AM stations. Some countries space AM stations 9 kHz spacing, and other 1 Tune in to a station you want to preset. countries use 10 kHz spacing. • You can also store the monaural reception mode for FM preset stations if selected. You can change the AM tuner intervals while the System is on stand by and the last selected source is AM
Summary of the content on the page No. 18
On-screen guide icons Playing Back a Disc • During DVD Video playback, the following icons may Before operating a disc, be familiar how a disc is recorded. appear on the TV screen: • DVD Video comprises of “Titles” which includes “Chapters,” DVD Audio/MP3/WMA comprise of At the beginning of a scene containing multi- “Groups” which include “Tracks,” and CD/SVCD/VCD angle views. comprise of only “Tracks.” At the beginning of a scene containing multi-
Summary of the content on the page No. 19
Remote Remote ONLY ONLY To locate a particular portion To play back using the disc menu While playing a disc except MP3/WMA... You can operate a disc—DVD and SVCD/VCD with + Playback Control (PBC)—using the disc menu shown on the SLOW– SLOW x2 x5 x10 x20 x60 TV screen. x2 x5 x10 x20 x60 7 For DVD Video/DVD Audio: • No sound comes out while searching on DVD Video/ 1 Show the disc menu. SVCD/VCD. TOP MENU MENU To return to normal playback, press DVD/CD 3. Remote O
Summary of the content on the page No. 20
7 For SVCD/VCD with PBC: Playing Back a Tape While playing a disc with PBC, “PBC” appears on the display. To insert a tape When disc menu appears on the TV screen, select an item on You can play back type I tapes. the menu. Playback of the selected item starts. Push Insert Close AUDIO SUB TITLE ANGLE Examples: 1 3 2 To select number 5, press 5. ZOOM VFP To select number 15, press +10, 4 5 6 then 5. 3D PHONIC DVD LEVEL To select number 30, press +10, 7 8 9 +10, then 10. PA
