Summary of the content on the page No. 1
DXT7_T9_Cover[USUN]-f.fm Page 1 Wednesday, February 16, 2005 1:24 PM
COMPACT COMPONENT SYSTEM
CA-DXT9
CA-DXT7
INSTRUCTIONS
GVT0147-001A
[US, UN]
English
Summary of the content on the page No. 2
DXT7_T9_Safty[USUN]-f.fm Page 1 Wednesday, February 16, 2005 1:23 PM Warnings, Cautions and Others Caution–– button! Disconnect the mains plug to shut the power off completely. The button in any position does not disconnect the mains line. The power can be remote controlled. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION • Do not block the ventilation openings or hol
Summary of the content on the page No. 3
DXT7_T9_Safty[USUN]-f.fm Page 2 Wednesday, February 16, 2005 1:23 PM Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/Top/Back: No obstructions should be placed in the areas shown by the dimensions below. 3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more. Front view Side view W
Summary of the content on the page No. 4
DXT7_T9_Safty[USUN]-f.fm Page 3 Wednesday, February 16, 2005 1:23 PM IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE UNIT. G-3
Summary of the content on the page No. 5
DX-T7_T9[USUN]-f.book Page 1 Wednesday, February 16, 2005 1:12 PM Introduction Precautions Contents Connections........................................................................ 3 Installation Display Indication ............................................................. 8 • Install the System in a location with adequate ventilation to prevent internal heat buildup in the System. Daily Operations—Playback............................................ 9 Canc
Summary of the content on the page No. 6
DX-T7_T9[USUN]-f.book Page 2 Wednesday, February 16, 2005 1:12 PM Playable Disc Types INFO IMPORTANT: Before playing a disc, make sure of the following... • Turn on the TV and select an appropriate input mode on the TV to view the pictures or on-screen displays. • For disc playback, you can change the initial setting to your preference. See “Setup Menu Operations” on DIGITAL VIDEO page 39. If “ ” appears on the TV screen when you press a DVD Logo is a tra
Summary of the content on the page No. 7
DX-T7_T9[USUN]-f.book Page 3 Wednesday, February 16, 2005 1:12 PM Connections Do not connect the AC power cord until all other Supplied accessories connections have been made. • FM antenna (x1) • AM loop antenna (x1) • Composite video cord (x1) • Connect VIDEO OUT directly to the video input of your • Remote control (x1) TV. Connecting VIDEO OUT to a TV via a VCR may • Batteries (x2) interfere with your viewing when playing back a copy- • AC plug adapter (x1) protected disc. Your viewi
Summary of the content on the page No. 8
DX-T7_T9[USUN]-f.book Page 4 Wednesday, February 16, 2005 1:12 PM CA-DXT7 ~ From the video input of TV/monitor See page 5. Ÿ From the digital input of digital audio component such as CD recorder See page 5. ! From the analog audio output of auxiliary equipment (VCR, etc.) See page 5. ⁄ From AM/FM antenna See page 5. @ From the speakers See page 6. ¤ Voltage selector Before plugging in, confirm the position the voltage selector points at. See page 7. # To a wall outlet Plug the AC power cord
Summary of the content on the page No. 9
OPTICAL DIGITAL OUTPUT DX-T7_T9[USUN]-f.book Page 5 Wednesday, February 16, 2005 1:12 PM ~ TV/monitor ⁄ AM/FM antenna To assemble the AM loop antenna Composite video cord (supplied) S video cord (not supplied) Green Red Blue To connect AM/FM antenna Component video cord (not supplied) AM loop antenna (supplied) Turn it until the best reception is • To select progressive scanning mode (see page 17), use obtained. COMPONENT jacks. • Connect the VIDEO jack, S-VIDEO jack, or COMPONEN
Summary of the content on the page No. 10
DX-T7_T9[USUN]-f.book Page 6 Wednesday, February 16, 2005 1:12 PM • Use only speakers with the same speaker impedance as @ Speakers indicated by the speaker terminals on the rear of the System. To connect the speaker cords • The front and center speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers. – When placing the speakers near a T
Summary of the content on the page No. 11
DX-T7_T9[USUN]-f.book Page 7 Wednesday, February 16, 2005 1:12 PM To remove the speaker grilles of the front speakers Preparing the remote control Holes When using the remote Projection control, point the top of the remote control toward the remote sensor as directly as possible. If you operate it from a diagonal position, the operating range (approx. 5 m) may be shorter. R6(SUM-3)/AA(15F) Speaker grille • Dispose of batteries in the proper manner, according to federal, state, a
Summary of the content on the page No. 12
DX-T7_T9[USUN]-f.book Page 8 Wednesday, February 16, 2005 1:12 PM Display Indication The indications on the display teach you a lot of things while 9 Tape operation indicators you are operating the System. • TAPE: lights when a tape is loaded in either deck A or B. Before operating the System, be familiar with when and how • (Reverse Mode): lights to indicate the current the indicator illuminates on the display. Reverse Mode (see page 13). • A: lights when a tape is i
Summary of the content on the page No. 13
DX-T7_T9[USUN]-f.book Page 9 Wednesday, February 16, 2005 1:12 PM Daily Operations—Playback ¥ Turn on the power. In this manual, the operation using the remote control The STANDBY lamp on the main unit goes off. is mainly explained; however, you can use the buttons • Without pressing AUDIO, the System also turns and controls on the main unit if they have the same (or on by pressing one of the source select buttons in the similar) name and marks. next step. ø Select the
Summary of the content on the page No. 14
DX-T7_T9[USUN]-f.book Page 10 Wednesday, February 16, 2005 1:12 PM Remote ONLY Listening to the Radio INFO If the received FM station is hard to listen To select the AM tuner interval spacing The MONO indicator lights on the Main Unit FM MODE ONLY display. Reception will improve though Some countries space AM stations 9 kHz apart, and other stereo effect is lost—monaural reception countries use 10 kHz spacing. mode. To restore the stereo effect, press the 1 S
Summary of the content on the page No. 15
DX-T7_T9[USUN]-f.book Page 11 Wednesday, February 16, 2005 1:12 PM 2 Select a preset number. On-screen guide icons Examples: • During disc playback, the following icons may appear for 123 To select preset number 5, press 5. a while on the TV screen: To select preset number 15, press 456 Appears at the beginning of a scene containing +10, then 5. 789 multi-angle views. To select preset number 30, press 10 0 +10 +10, +10, then 10. Appears at the
Summary of the content on the page No. 16
DX-T7_T9[USUN]-f.book Page 12 Wednesday, February 16, 2005 1:12 PM 7 For SVCD/VCD with PBC To locate a particular portion While playing a disc with PBC, “PBC” appears on the While playing a disc except MP3/WMA... display instead of the playing time. When disc menu appears on the TV screen, select an item on the menu. Playback of the selected item starts. Examples: 123 To select number 5, press 5. • No sound comes out while searching on DVD Video/ 456 To sel
Summary of the content on the page No. 17
DX-T7_T9[USUN]-f.book Page 13 Wednesday, February 16, 2005 1:12 PM To change the tape running direction Playing Back a Tape TAPE-A TAPE-B 3 (forward) To insert a tape 2 (reverse) You can play back type I tapes. • The use of C-120 or longer tape is not recommended. Push To reverse the tape automatically REVERSE MODE Tape is reversed, and playback repeats until Insert you stop it. Tape is not reversed. When the current side of the tape reaches its end, playback stops. Tape is reversed o
Summary of the content on the page No. 18
DX-T7_T9[USUN]-f.book Page 14 Wednesday, February 16, 2005 1:12 PM Daily Operations—Sound&Other Adjustments Adjusting the Volume Remote Control The volume level can be adjusted in 32 steps (VOLUME MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX). Remote control: Main unit: AUDIO AUDIO VOL TV AUDIO VOL +/– // / / ENTER Adjusting the Speaker Output Remote 123 ONLY Level 456 789 You can adjust the speaker output level from –6 (dB) to +6 10 0 +10 VFP / (dB). SCAN MODE DVD LEVEL • You
Summary of the content on the page No. 19
DX-T7_T9[USUN]-f.book Page 15 Wednesday, February 16, 2005 1:12 PM Remote ONLY Reinforcing the Bass Sound Creating Your Own Sound INFO To adjust the bass level gradually Modes—User Mode INFO You can select the subwoofer level from level 0 You can adjust the preset Sound Modes to create your own (minimum) to level 4 (maximum). Sound Modes which suit your taste. The changed settings can Remote control: Main unit: be stored as the USER1, USER2 and USER3 Modes.
Summary of the content on the page No. 20
DX-T7_T9[USUN]-f.book Page 16 Wednesday, February 16, 2005 1:12 PM Remote ONLY To adjust the DSP effect level Selecting the Surround Modes INFO When one of the DSP Modes (except for “ALL CH. ST”) is • For DVD/CD, TAPE-A, TAPE-B, AUX: selected... SURROUND MODE EFFECT EFFECT 1 EFFECT 2 ALL CH. ST DANCE HALL STADIUM MUSIC MOVIE AUTO STEREO EFFECT 3 • The initial setting is “EFFECT3.” • For FM/AM: SURROUND MODE ALL CH. ST DANCE HALL Presetting Automatic DVD Video S
