Summary of the content on the page No. 1
IH818B
INSTRUCTION MANUAL
Contents
Warnings and Precautions ................................................................................2
Important Safety Instructions .............................................................................3
In the Box & Features ........................................................................................4
Powering the Unit & Changing the Remote Battery ..........................................5
Docking an iPod .............................
Summary of the content on the page No. 2
Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is WARNING: Danger of explosion if the remote intended to alert the user to the presence of uninsulated control’s batteries are incorrectly installed. Replace “dangerous voltage” within the product’s enclosure that only with the same or equivalent battery. may be of sufficient magnitude to constitute a risk of electric shock to persons.
Summary of the content on the page No. 3
Important Safety Instructions 1. Read Instructions - All the safety and operating instruction should be read protection against voltage surges and built-up static charges. Article 810 of before the product is operated. the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding . Retain Instructions - The safety and operating instruction should be of the mast and supporting structure, grounding of the lead
Summary of the content on the page No. 4
In the Box Speaker Speaker Subwoofer 2.1 Channel iPod Docking/ DVD Home Music System iPod Brackets (8) Remote Control AM Antenna Video Cable FM Antenna Audio Cable Features • Drawer-load DVD, DVD±R/RW, CD, • Stereo headphone jack CD-R/RW, and JPEG disc player • Progressive scan output • Docking station for iPod® • S-Video output • Plays and charges docked iPod® • Component output • AM/FM stereo radio with digital tuning • Composite video output • Station memory presets • USB connection • Digital
Summary of the content on the page No. 5
Powering the Unit AC 10V ~ 60Hz Changing the Remote Battery WARNING: Danger of explosion if the remote control’s batteries are incorrectly installed. Replace only with the same or equivalent battery. AAA AAA 1. To access the battery, slide the battery cover off in the direction of the arrow above the word “Open”. . Replace the old battery with an equivalent new battery (AAA Batteries). 5
Summary of the content on the page No. 6
Docking an iPod 1. Locate the numbered Bracket that fits the iPod that will be docked. Each included Bracket has a number on it, indicatingwhich iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed. . Snap the Bracket into place over the iPod connector in the Docking Station. All Brackets will only fit one way onto the Dock. 3. Connect the iPod to the iPod connector inside the Docking Station. Once an iPod is connected
Summary of the content on the page No. 7
Playing an iPod 1. Connect an iPod to the Docking Station. ( See “Docking an iPod” on page 6) . Press the Standby Button to turn the unit on. 3. Press the Play/Pause Button to begin playing the docked iPod. 4. Turn the Volume Dial to increase or decrease the volume of the unit. 5. Press the Skip/Search/Tuning Buttons to skip tracks. Press and hold the Skip/ Search/Tuning Buttons on the remote to search through individual tracks. 6. Press the Chapter, Album, or Playlists Buttons on the remote t
Summary of the content on the page No. 8
Playing a DVD or CD 1. Power the unit on by pressing the Standby Button. . Open the CD Door by pressing the Eject Button and insert a CD, CD-R/RW, DVD±R/RW, or JPEG disc. Close the CD Door by pressing the Eject Button again. 3. Press the Function Button to switch to CD/DVD Mode. Initially , CD /DVD Mode will be indicated by “Loading” flashing in the LCD display . When the CD/DVD loads, this will be r eplaced by track numbers. 4. Press the Play/Pause Button to play the loaded disc. 5. Press
Summary of the content on the page No. 9
SD Card Slot 1. Load an SD Card into the SD card slot located on the front of the unit. . Press the Function Button to switch the unit to DVD mode. 3. Press the DVD/USB/CARD Button on the remote control. 4. Press the Directional Buttons on the remote to view the different options. High- light the “SD” option and press the Select Button. 5. To view or listen to files from the connected SD card, highlight the desired file us- ing the Directional Buttons then press the Select Button. USB Drive 1.
Summary of the content on the page No. 10
Tuning the AM/FM Radio 1. Power the unit on by pressing the Standby Button. . Press the Function Button to switch the unit to AM/FM Radio Mode. An “AM” or “FM ST .” will appear in the LCD display to indicate AM/FM Radio Mode. 3. Press the Stop/Band Button to switch between AM or FM radio. 4. Press and hold the Skip/Search/Tuning Buttons to tune the AM or FM radio. 5. Press the Skip/Search/Tuning Buttons to switch between saved radio stations Saving Stations to the Unit’s Memory 1. After Tuni
Summary of the content on the page No. 11
Using the Composite Video Output When connecting two pr oducts using an RCA Cable, match t he color ed ports with the same color ed connection. (Red to Red, White to White, and Y ellow to Y ellow) 1. Connect the RCA Cable to the RCA Audio Outputs and RCA Composite Video Output on the unit, and to the audio/video inputs on the Television. . Turn the unit on by pressing the Standby Button. 3. Change the television to the correct audio/video input setting. 4. Audio and video played through th
Summary of the content on the page No. 12
Using the Component Input When connecting two products usinga component video cable, match the colored ports with the same color ed connection. (Gr een to Gr een, Red to Red, and Blue to Blue) 1. Connect a component video cable (not included) to the Component Video Outputs on the unit and the component video inputs on a Television . Connect an RCA Cable to the RCA Audio Outputs on the unit to the audio inputs on a Television. 3. Turn the unit on by pressing the Standby Button. 4. Chang
Summary of the content on the page No. 13
Using the Line Input 1. Connect a mini-phono 3.5mm cable (not included) to the Line Input on the unit and the audio output on an MP3 player. . Turn the unit on by pressing the Standby Button. 3. Press the Function Button to switch the unit to aux mode. 4. Change the MP3 player to the correct audio output setting if necessary. 5. Audio played through the connected MP3 player will now be heard through the unit. Please note, if the Line Input is connected, the Ster eo RCA Inputs will not work.
Summary of the content on the page No. 14
Using the Stereo RCA Inputs When connecting two pr oducts using an RCA Cable, match t he color ed ports with the same color ed connection. (Red to Red, White to White, and Y ellow to Y ellow) 1. Connect a stereo RCA cable (not included) to the Stereo RCA Inputs on the unit and the stereo RCA outputs on a television or sound system. . Turn the unit on by pressing the Standby Button. 3. Press the Function Button to switch the unit to Aux mode. 4. Audio played through the connected television
Summary of the content on the page No. 15
Using the Coaxial Digital Output When connecting two pr oducts using an RCA Cable, match t he color ed ports with the same color ed connection. (Red to Red, White to White, and Y ellow to Y ellow) 1. Connect a coaxial cable (not included) to the Digital Coaxial Output on the unit and the coaxial audio input on a surround sound system. . Turn the unit on by pressing the Standby Button. 3. Change the stereo system to the correct audio input setting. 4. Audio played through the unit will now
Summary of the content on the page No. 16
The DVD Setup Menu • In DVD mode, pr ess the Setup Button to display the unit’ s DVD setup menu. Digital Output Aspect Ratio OSD Language Use Default Settings : 4:3 PS : RA : English W Language Subtitle TV System Screen Saver : English : NTSC : Off V Audio ideo Out : P-Scan : English Video DVD menu DVD menu : English English French Spanish Audio Misc Language Use the Language Section of the Setup Menu to change the language of the DVD Player’s interfaces as well as the DVD subtitles, audio,
Summary of the content on the page No. 17
The DVD Setup Menu Video Aspect Ratio The ratio of the width of an image to its height. • 4:3PS The 4:3PS (Pan & Scan) ratio shows the DVD movie in full screen, but the sides of the movie are cut away so that it fits on a standard TV screen • 4:3LB The 4:3LB (Letterbox) ratio shows the DVD movie in a original format, but with black bars at the top and bottom so that it fits on a standard TV screen. • 16:9 The 16:9 ratio shows the DVD movie in its widescreen format. Use this setting when view
Summary of the content on the page No. 18
Location of Controls 1 7 3 4 8 9 5 10 6 11 1 18
Summary of the content on the page No. 19
Control Definitions 1 Skip/Search/Tuning/Memory Buttons Press the Skip/Search/Tuning/Memory Buttons to skip between tracks or chap- ters on a docked iPod, a CD, or a DVD. Press and hold the Skip/Search/Tuning/ Memory Buttons to search through an individual tracks or chapters on a docked iPod, a CD, or a DVD. Also use these buttons to tune the AM/FM radio, and cycle through AM/FM radio stations that are saved to the unit’s memory. 2 LCD Display The LCD displays the DVD or CD chapter or tra
Summary of the content on the page No. 20
Location of Controls 19 13 14 0 1 15 16 17 3 4 18 0
