Summary of the content on the page No. 1
XDM6820
INSTALLATION/OWNERS MANUAL
AM/FM/CD/MP3/WMA Receiver with Detach Face
Summary of the content on the page No. 2
XDM6820 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. (consult a qualified technician for instructions) Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started Remove 2 transit screws located on top of the unit. Insert the supplied keys into the slots as shown, and slide the uni
Summary of the content on the page No. 3
XDM6820 INSTALLATION Wiring Diagram FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XDM6820 uses one 10 amp ATM fuse located beside the wiring connector. 3
Summary of the content on the page No. 4
XDM6820 OPERATION Control Locations 1 2 3 4 5 6 7 8 9 10 22 21 20 19 18 17 16 15 14 13 12 11 Release Tuner Scan/8 1 12 Power Local/Distance/7 2 13 Volume Preset 6/Folder Up 3 14 Band/Play/Pause Preset 5/Folder Down 4 15 Mode/Search Preset 4 5 16 Auto Store/Preset Scan/Enter Preset 3/Intro 6 17 7 Tune/Track Down 18 Preset 2/Random 8 Eject 19 Preset 1/Repeat 9 Tune/Track Up 20 Audio 10 Display/0 21 Loudness 11 EQ/9 22 Mute The XDM6820 allows playback of your favorite MP3 and WMA files recorded on
Summary of the content on the page No. 5
XDM6820 OPERATION General Operation Faceplate Removal Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure. Semi-permanent Remove trim ring and install supplied #1 x 7/32” Phillips Faceplate Installation head screw through left side of mounting frame into faceplate. Power On/Off Press POWER or any other button (except eject) to turn the unit on. Inserting a disc will turn the unit on automatically. Press POWER
Summary of the content on the page No. 6
XDM6820 OPERATION General Operation Programmable Display In tuner mode, press and hold DISP then press TUNE ll Priority to select function priority display. "FREQ" will momentarily appear in the display. Note: "FUNC" will appear in CD or AUX modes. Radio frequency (tuner mode), CD track/elapsed time (CD mode) or AUX (AUX mode) will be displayed by default. Note: When playing MP3/WMA files, the track number/elapsed time, track name, directory name, title, artist, album, year or comment will
Summary of the content on the page No. 7
XDM6820 OPERATION General Operation Audio Press AUDIO to select between Volume (default), Bass, Treble, Balance & Fader. Bass Press AUDIO until BAS appears Rotate encoder left/right to adjust ( -6 minimum / +6 maximum) Treble Press AUDIO until TRE appears Rotate encoder left/right to adjust ( -6 minimum / +6 maximum) Balance Press AUDIO until BAL appears Rotate encoder left/right to adjust (BAL L 12-BAL 00-BAL R 12) BAL 00 represents equal balance Fader Press AUDIO until FAD appears Rotate encod
Summary of the content on the page No. 8
XDM6820 OPERATION Tuner Operation Seek Tuning Press TUNE or TUNE momentarily to seek the nn ll next strong station. Manual Tuning Press TUNE or TUNE for more than 2 seconds, nn ll then release. "MANUAL" will momentarily appear in the display. Press TUNE or TUNE momentarily to nn ll move radio frequency up or down one step at a time. Press and hold to advance quickly. If tuning is not adjusted for 5 seconds, the unit will return to seek tuning mode (default). "AUTO" will momentarily appear in t
Summary of the content on the page No. 9
XDM6820 OPERATION CD Player Operation With the label facing up, insert a standard size CD into the Insert CD CD slot. The CD will automatically begin playback. Press EJECT to eject the CD. The unit will change to previous Eject CD mode of operation (AM, FM, or auxiliary input). If the disc is not removed within 10 seconds, the unit will reload the disc. The unit does not have to be turned on to eject CD. Press TRACK to skip to the beginning of the next track. Track Select ll Press TRACK to retu
Summary of the content on the page No. 10
XDM6820 OPERATION CD Player Operation - MP3/WMA Files When an MP3/WMA encoded disc is first inserted, Playing an MP3/WMA Disc "READING" will appear in the display. Depending on the number of files and folders, this may take several seconds. The icon will illuminate anytime a valid MP3 encoded MP3 Icon disc is inserted and flash in MP3 search/navigate modes. The icon will illuminate anytime a valid WMA encoded WMA Icon disc is inserted and flash in WMA search/navigate modes. Folder Ic
Summary of the content on the page No. 11
XDM6820 OPERATION CD Player Operation - MP3/WMA Files Refer to the following button function table when selecting, searching or navigating MP3/WMA files and folders: MP3/WMA Button Function Table Button Function SEARCH Direct Select, Search and Navigate Modes ENTER Enter/Confirm Preset 1 A, B, C, 1 Preset 2 D, E, F, 2 Preset 3 G, H, I, 3 Preset 4 J, K, L, 4 Preset 5 M, N, O, 5 Preset 6 P, Q, R, 6 7 S, T, U, 7 8 V, W, X, 8 9 Y, Z, /, 9 0 -, _, +, 0 AUDIO Character Shift Rotary Encoder Charact
Summary of the content on the page No. 12
XDM6820 OPERATION CD Player Operation - MP3/WMA Files Alphanumeric File Press SEARCH for more than 3 seconds, then release. or Folder Search Press SEARCH again, an " " will flash in the display. Use * Step 1 the buttons in the table on page 11 (32 character maximum input) or the rotary encoder to enter the desired alphanu- meric search characters. Press AUDIO to advance one character to the right. Step 2 Press ENTER to initiate the selected alphanumeric search. Step 3 Turn the rotary encoder
Summary of the content on the page No. 13
XDM6820 OPERATION CD Player Operation - MP3/WMA Files Navigating Note After navigating by direct select, alphanumeric search or file/folder navigate modes, the track number and elapsed time will be displayed by default. Press DISP momentarily to select clock, track name, directory name, title, artist, album, year or comment. *Folder Access Press F to select the previous folder. Press F to select the next folder. *Folder access is only available on MP3/WMA discs recorded with more than one folde
Summary of the content on the page No. 14
XDM6820 OPERATION CD Player Operation - MP3/WMA Files The following types of discs/files are compatible: Media Compatibility CD-ROM (ISO), CD-R, CD-RW CD-DA MP3 data WMA data The following types of discs/files are not compatible: WMA files that are protected by DRM (Digital Rights Management). WMA lossless format Discs recorded with Track At Once or packet writing MP3 PRO format MP3 playlists WAV format MP3/WMA playback sequence is based on recorded order of Playback Order
Summary of the content on the page No. 15
XDM6820 OPERATION CD Player Operation - MP3/WMA Files Additional MP3/WMA An internal buffer provides ESP (Electronic Skip Protection) Information to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Only MP3 files with filename extension (.mp3) can be played. Only WMA files with filename extension (.wma) can be played. Do not attempt to play discs which contain non-MP3/WMA files with
Summary of the content on the page No. 16
XDM6820 WARRANTY Limited One-Year Warranty This warranty gives you specific legal rights. You may What to do? also have other rights which vary from state to state. If purchased within the USA: 1. Before you call for service, check your Dual Electronics Corp. warrants this product to the operating instruction booklet. A slight adjustment original purchaser to be free from defects in material of any custom controls discussed in your and workmanship, under normal conditions, for a instruction b
Summary of the content on the page No. 17
XDM6820 OPERATION Specifications CD Player Signal-to-noise: >92dB Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 1 Bit FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: 22uV Frequency response: 30Hz-2.2kHz General Total power output: 200 Watts Peak Power output: 50Wx4 @ 4 ohms, 14.4 VDC Operating
Summary of the content on the page No. 18
XDM6820 WARRANTY Troubleshooting Problem Cause Action Yellow wire not connected or incorrect voltage Check connections for proper voltage Unit will not turn on (no power) Red wire not connected or incorrect voltage (11~16VDC) Black wire not connected Check connection to ground Fuse blown Replace fuse Unit has power Speaker wires not connected Check connections at speakers (but no sound) One or more speaker wires touching each Insulate all bare speaker wires from other or touching chassis ground
Summary of the content on the page No. 19
XDM6820 OPERATION Notes 19
Summary of the content on the page No. 20
Dual Electronics Corp. 21318 64th Ave. South Kent, WA 98032 Toll Free: 1-866-626-7863 www.dualav.com ©2005 Dual Electronics Corp. All rights reserved. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries. NSA0205-V02
