Summary of the content on the page No. 1
EF-S18-135mm f/3.5-5.6 IS STM
ENG
Instructions
C OP Y
Summary of the content on the page No. 2
Thank you for purchasing a Canon product. The Canon EF-S18-135mm f/3.5-5.6 IS 2. Aspherical and UD lens elements result in outstanding image delineation. STM lens is a high-performance high- 3. Electronic manual focusing made possible magnification zoom lens equipped with an by electronically detecting the rotation of the Image Stabilizer, and has been developed for focusing ring. digital SLRs compatible with EF-S lenses*. 4. Manual focusing is available after the subject comes into focus
Summary of the content on the page No. 3
Handling Cautions Safety Precautions ● ●If the lens is taken from a cold environment into a ● ●Do not look at the sun or a bright light source warm one, condensation may develop on the lens through the lens or camera. Doing so could result in surface and internal parts. To prevent condensation loss of vision. Looking at the sun directly through the in this case, first put the lens into an airtight plastic bag lens is especially hazardous. before taking it from a cold to warm environment
Summary of the content on the page No. 4
Safety Precautions This device complies with Part 15 of the FCC Rules. This Class B digital apparatus complies with Canadian ICES- Operation is subject to the following two conditions: (1) This 003. device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifica
Summary of the content on the page No. 5
Shooting Precautions The EF-S18-135mm f/3.5-5.6 IS STM utilizes a stepping motor that drives the focus lens. The motor also controls the focus lens during zooming. 1. When the camera is OFF The motor does not operate while the camera is OFF or when the camera is OFF due to the use of the auto power off function. Therefore, users must be aware of the following points. ● ● Manual focus adjustments are not possible. ● ● During zooming, delayed focus will occur. 2. When the lens is in sleep mode I
Summary of the content on the page No. 6
Nomenclature Focus mode switch (→ 6) Hood mount (→ 7) Zoom position index (→ 7) Zoom ring lock lever (→ 8) Filter Mounting Thread (→ 11) Focusing ring (→ 6) Zoom ring (→ 7) Contacts (→ 6) Image stabilizer switch (→ 9) Lens mount index (→ 6) ● ● For detailed information, reference page numbers are provided in parentheses ( → **). ENG-5 C OP Y
Summary of the content on the page No. 7
Mounting and Setting the Focus 1 2 Detaching the Lens Mode See your camera’s instructions for details on mounting and detaching the lens. To shoot in autofocus (AF) mode, set the focus ● ● After detaching the lens, place the lens with mode switch to AF. the rear end up to prevent the lens surface and To use only manual focusing (MF), set the focus contacts from getting scratched. mode switch to MF, and focus by turning the ● ● If the contacts get soiled, scratched, or have focusing
Summary of the content on the page No. 8
Hood (sold separately) Zooming 3 4 The EW-73B hood cuts out unwanted light and To zoom, turn the lens’ zoom ring. protects the front of the lens from rain, snow, and dust. ● ● Be sure to finish zooming before focusing. To attach the hood, align the hood’s attachment Zooming after focusing can affect the focus. position mark with the red dot on the front of the ● ● Blurring may temporarily occur if the zoom ring is lens, then turn the hood as shown by the arrow quickly rotated. until the
Summary of the content on the page No. 9
Fixing the Zoom Ring 5 The zoom ring can be fixed to keep the lens at the shortest point. This function is convenient for carrying a camera on a strap because it prevents the lens from extending. 1 Rotate the zoom ring to the 2 Slide the zoom ring lock widest position (18 mm). lever in the direction indicated by the arrow. ● ● To release the zoom ring, slide the zoom ring lock lever in the direction opposite to the arrow. The zoom ring can only be locked at maximum wide angle. ENG-8 C OP Y
Summary of the content on the page No. 10
Image Stabilizer 6 You can use the image stabilizer in AF or MF ● ● The Image Stabilizer cannot compensate for a mode. blurred shot caused by a subject that moved. This function provides optimal image stabilization ● ● The Image Stabilizer may not be fully effective depending on shooting conditions (such as if you shoot from a violently shaking vehicle or other transportation. shooting still subjects and following shots). ● ● The Image Stabilizer consumes more power than normal shooting, s
Summary of the content on the page No. 11
Image Stabilizer The image stabilizer for this lens is effective for hand-held shots in the following conditions. ON ON OFF OFF ● ● In semi-darkened areas such as indoors or ● ● When panning subjects in motion. outdoors at night. ● ● In locations where flash photography is ■ Dynamic IS Function prohibited, such as art museums and theater The EF-S18-135mm f/3.5-5.6 IS STM is stages. equipped with dynamic IS, effective when ● ● In situations where your footing is uncertain. shooting while walk
Summary of the content on the page No. 12
Filters Extension Tubes 7 8 (sold separately) (Sold Separately) You can attach filters to the filter mounting You can attach extension tube EF12 II or EF25 thread on the front of the lens. II for magnified shots. The shooting distance and magnification are shown below. ● ● Only one filter may be attached. Focusing Distance Range (mm) Magnification (×) ● ● If you need a polarizing filter, use the Canon Close distance Long distance Close distance Long distance Circular Polarizing Filter PL-C
Summary of the content on the page No. 13
Specifications 9 Focal Length/Aperture 18-135mm f/3.5-5.6 Lens Construction 12 groups, 16 elements Minimum Aperture f/22-36* Angle of View Diagonal: 74°20′ - 11°30′, Vertical: 45°30′ - 6 °20′, Horizontal: 64°30′ - 9°30′ Min. Focusing Distance 0.39m/1.28 ft. Max. Magnification 0.28x (at 135 mm/5.31 inch) Field of View Approx. 248 x 372 - 53 x 80mm/9.76 x 14.65 - 2.09 x 3.15 inch (at 0.39 m/1.28 ft.) Filter Diameter 67mm/2.64 inch Max. Diameter and Length 76.6 x 96.0mm/3.02 x 3.78 inch Weight Appr
Summary of the content on the page No. 14
CT1-8582-001 0812Ni © CANON INC. 2012 C OP Y
