Summary of the content on the page No. 1
Summary of the content on the page No. 2
Summary of the content on the page No. 3
SAFETY PRECAUTIONS (Always read these precautions before using this equipment.) Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The precautions given in this manual are concerned with this product. In this manual, the safety precautions are ranked as "DANGER" and "CAUTION". Indicates that incorrect handling may cause hazardous conditions, DANGER resulting in death or
Summary of the content on the page No. 4
[DESIGN PRECAUTIONS] DANGER ● The display section is an analog-resistive type touch panel. If you touch the display section simultaneously in 2 points or more, the switch that is located around the center of the touched point, if any, may operate. Do not touch the display section in 2 points or more simultaneously. Doing so may cause an accident due to incorrect output or malfunction. ● When programs or parameters of the controller (such as a PLC) that is monitored by the GOT are changed, be sur
Summary of the content on the page No. 5
[MOUNTING PRECAUTIONS] CAUTION ● Use the GOT in the environment that satisfies the general specifications described in the User's Manual. Not doing so can cause an electric shock, fire, malfunction or product damage or deterioration. ● When mounting the GOT to the panel, tighten the mounting screws within the specified torque range. Undertightening can cause the GOT to drop, short or malfunction. Also, undertightening can disable waterproof or oil proof effect. Overtightening can cause a drop, s
Summary of the content on the page No. 6
[WIRING PRECAUTIONS] DANGER ● Be sure to shut off all phases of the external power supply used by the system before wiring. Failure to do so may result in an electric shock, product damage or malfunctions. ● Always ground the FG terminal of the GOT power to the protective ground conductors dedicated to the GOT. Not doing so may cause an electric shock or malfunction. ● Correctly wire the GOT power supply section after confirming the rated voltage and terminal arrangement of the product. Not doin
Summary of the content on the page No. 7
[STARTUP/MAINTENANCE PRECAUTIONS] DANGER ● When power is on, do not touch the terminals. Doing so can cause an electric shock or malfunction. ● Correctly connect the battery connector. Do not charge, disassemble, heat, short-circuit, solder, or throw the battery into the fire. Doing so will cause the battery to produce heat, explode, or ignite, resulting in injury and fire. ● Before starting cleaning or terminal screw retightening, always switch off the power externally in all phases. Not switch
Summary of the content on the page No. 8
[DISPOSAL PRECAUTIONS] CAUTION ● When disposing of the product, handle it as industrial waste. ● When disposing of this product, treat it as industrial waste. When disposing of batteries, separate them from other wastes according to the local regulations. (For details of the battery directive in EU member states, refer to the User's Manual of the GOT to be used.) [TOUCH PANEL PRECAUTIONS] CAUTION ● For the analog-resistive film type touch panels, normally the adjustment is not required. However,
Summary of the content on the page No. 9
INTRODUCTION Thank you for choosing Mitsubishi Graphic Operation Terminal (Mitsubishi GOT). Read this manual and make sure you understand the functions and performance of the GOT thoroughly in advance to ensure correct use. CONTENTS SAFETY PRECAUTIONS.........................................................................................................................A - 1 INTRODUCTION ............................................................................................................
Summary of the content on the page No. 10
6. INSTALLATION 6.1 Control Panel Inside Dimensions for Mounting GOT....................................................................... 6 - 1 6.2 Panel Cutting Dimension ................................................................................................................. 6 - 2 6.3 Mounting Position ............................................................................................................................ 6 - 2 6.4 Control Panel Temperature and Mounting Angle ...
Summary of the content on the page No. 11
8.9.4 Parts name ......................................................................................................................... 8 - 13 8.9.5 Caution for compliance with EMC Directive........................................................................ 8 - 13 8.10 Panel-Mounted USB Port Extension.............................................................................................. 8 - 14 8.10.1 Applicable panel-mounted USB port extension .....................................
Summary of the content on the page No. 12
12. CLOCK SETTINGS AND BATTERY STATUS DISPLAY (TIME SETTING AND DISPLAY) 12.1 Time Setting and Display............................................................................................................... 12 - 1 12.1.1 Time setting and display functions...................................................................................... 12 - 1 13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL) 13.1 Data Storage Location .................................................................
Summary of the content on the page No. 13
16.4 When Installing the Different Version of BootOS, Standard Monitor OS ....................................... 16 - 9 16.5 CoreOS........................................................................................................................................ 16 - 11 16.5.1 Installing the CoreOS ....................................................................................................... 16 - 11 16.5.2 When the CoreOS cannot be installed .......................................
Summary of the content on the page No. 14
A - 12
Summary of the content on the page No. 15
MANUALS The following table lists the manual relevant to this product. Refer to each manual for any purpose. Manual Number Manual Name Packaging (Model code) GT Works3 Version1 Installation Procedure Manual Enclosed in product - SH-080866ENG GT Designer3 Version1 Screen Design Manual (Fundamentals) 1/2, 2/2 Stored in CD-ROM (1D7MB9) SH-080867ENG GT Designer3 Version1 Screen Design Manual (Functions) 1/2, 2/2 Stored in CD-ROM (1D7MC1) SH-080868ENG GOT1000 Series Connection Manual (Mitsubishi Prod
Summary of the content on the page No. 16
Obtaining information of Non-Mitsubishi products applicable to the • GOT1000 Series Connection Manual (Non-Mitsubishi GOT Products 1) for GT Works3 • GOT1000 Series Connection Manual (Non-Mitsubishi Connecting Non-Mitsubishi products to the GOT Products 2) for GT Works3 Obtaining information of peripheral devices applicable to the GOT GOT1000 Series Connection Manual (Microcomputer, MODBUS Products, Peripherals) for GT Works3 Connecting peripheral devices including a barcode reader to the GO
Summary of the content on the page No. 17
ABBREVIATIONS AND GENERIC TERMS GOT Abbreviations and generic terms Description GT1695 GT1695M-X Abbreviation of GT1695M-XTBA, GT1695M-XTBD GT1685 GT1685M-S Abbreviation of GT1685M-STBA, GT1685M-STBD GT1675M-S Abbreviation of GT1675M-STBA, GT1675M-STBD GT1675 GT1675M-V Abbreviation of GT1675M-VTBA, GT1675M-VTBD GT1675-VN Abbreviation of GT1675-VNBA, GT1675-VNBD GT1672 GT1672-VN Abbreviation of GT1672-VNBA, GT1672-VNBD GT1665M-S Abbreviation of GT1665M-STBA, GT1665M-STBD GT1665 GT1665M-V Abbrev
Summary of the content on the page No. 18
Abbreviations and generic terms Description GT16 Handy GT1665HS-V Abbreviation of GT1665HS-VTBD GOT Handy GOT1000 GOT GT11 GT1155HS-Q Abbreviation of GT1155HS-QSBD Series Handy GT1150HS-Q Abbreviation of GT1150HS-QLBD GOT GT SoftGOT1000 Abbreviation of GT SoftGOT1000 Communication unit Abbreviations and generic terms Description GT15-QBUS, GT15-QBUS2, GT15-ABUS, GT15-ABUS2, GT15-75QBUSL, GT15-75QBUS2L, Bus connection unit GT15-75ABUSL, GT15-75ABUS2L Serial communication unit GT15-RS2-9P,
Summary of the content on the page No. 19
Option Abbreviations and generic terms Description GT05-MEM-16MC, GT05-MEM-32MC, GT05-MEM-64MC, GT05-MEM-128MC, CF card GT05-MEM-256MC, GT05-MEM-512MC, GT05-MEM-1GC, GT05-MEM-2GC, GT05-MEM-4GC, GT05-MEM-8GC, GT05-MEM-16GC Memory card adaptor GT05-MEM-ADPC SD card L1MEM-2GBSD, L1MEM-4GBSD GT16-MESB, GT15-FNB, GT15-QFNB, GT15-QFNB16M, GT15-QFNB32M, Option function board GT15-QFNB48M, GT11-50FNB, GT15-MESB48M Battery GT15-BAT, GT11-50BAT GT16-90PSCB, GT16-90PSGB, GT16-90PSCW, GT16-90PSGW, GT1
Summary of the content on the page No. 20
Software Abbreviations and generic terms Description GT Works3 Abbreviation of the SW DNC-GTWK3-E and SW DNC-GTWK3-EA GT Designer3 Abbreviation of screen drawing software GT Designer3 for GOT1000 series GT Simulator3 Abbreviation of screen simulator GT Simulator3 for GOT1000/GOT900 series GT SoftGOT1000 Abbreviation of monitoring software GT SoftGOT1000 GT Converter2 Abbreviation of data conversion software GT Converter2 for GOT1000/GOT900 series GT Designer2 Classic Abbreviation of screen dra
