Xantech Ir Receiver Kit 17294 Rp user manual

Summary of the content on the page No. 1

IR Receivers
INSTALLATION INSTRUCTIONS
172-94
®
XTRA LINK 2
REMOTE CONTROL EXTENSION SYSTEM
The Xtra Link 2 system provides full remote control operation of a satellite receiver, cable box or VCR from
a second room by sharing the coaxial cable connecting your video equipment to this second room’s TV.
The 172-94 Xtra Link 2 consists of the following supplied parts (Fig.1):
1. One 291-00 IR Receiver. It is placed at the remote room location to receive IR signals from the
handheld remote controller

Summary of the content on the page No. 2

OUT Injector, you must use a Xantech BYPASS94 KIT to route the IR commands around the amplifier(s). When using more than one Xtra Link for more rooms, be sure the RF splitters you use are DC passing types, such as Xantech Models 200-00 (2-way) and 202-00 (4-way). Refer to Fig. 4. INSTALLING THE 291-00 IR RECEIVER: Insert the cable mini plug attached to the 291-00 into the jack marked "IR RCVR" on the INJ94 Injector. Refer to Fig. 3. Plug the 781C-00 Power Supply cord into the jack marked "+12

Summary of the content on the page No. 3

IR Receivers IN INSTALLING THE CPL94B COUPLER: Connect the other short coaxial cable between "SAT/VCR" on the CPL94B Coupler and the RF splitter. Connect the room-to-room cable to "REMOTE TV" on the CPL94B Coupler. Make the remaining connections from the RF splitter to the "OUT TO TV" on VCR, the RF splitter to the local TV, etc., as shown in Fig. 3. NOTE: If your main room TV has A/V input jacks, you may connect the VCR and Satellite Receiver with A/V patch cords instead of using the RF IN jac

Summary of the content on the page No. 4

OPERATION When you use the system, a red LED on the front of the 291-00 and the 283M emitter will flash when receiving your infrared commands. The maximum usable distance between your IR remote and the 291-00 Receiver will vary for each remote and might be shorter than when directly used in the room containing the satellite revceiver or other IR controlled devices. may be left on continuously as it does not affect the normal operation of the remote The 172-94 system controlled device(s) and con