Vox AD60VTX user manual

Summary of the content on the page No. 1

Addendum

Summary of the content on the page No. 2

The lightning flash with arrowhead symbol IMPORTANT SAFETY INSTRUCTIONS within an equilateral triangle, is intended to alert the user to the presence of uninsulated • Read these instructions. “dangerous voltage” within the product’s •Keep these instructions. enclosure that may be of sufficient magnitude • Heed all warnings. to constitute a risk of electric shock to •Follow all instructions. persons. • Do not use this apparatus near water. • Mains powered apparatus shall not be exposed to drippin

Summary of the content on the page No. 3

Introduction WELCOME ABOARD AGAIN! any thanks for adding a VOX Valvetronix VTX combo to your sonic arsenal. We’re sure it’ll give you countless hours of great guitar tones that will feel M as good as they sound! You may have noticed that this is an addendum to the original Combo Manual. In this we’ll cover the new NeoDog speakers, new cabinet construction, correctly connecting external speakers and the new Imped- ance Select Switch for your AD60VTX or AD120VTX combo. Everything else, and I mean

Summary of the content on the page No. 4

AD60VTX SPEAKER CONNECTION CHART Please read the below chart to make sure you correctly connect external speakers to the AD60VTX. Keep in mind that the speaker jacks are wired in Series, which means that the total impedance of the speakers equals the sum of the impedance of the internal (8 Ohms) plus the external speaker (4 or 8 Ohms). As an example, the AD60VTX contains an internal 8 Ohm speaker; when you hook up an additional 8 Ohm speaker, you’ll set the impedance select switch on the back of

Summary of the content on the page No. 5

AD120VTX SPEAKER CONNECTION CHART AD120VTX If you use: Set the Impedance of the AD120VTX to: Use Speaker Jack: *8 Ohm per side (AD212 or AD412) 16 Ohms Left and Right 4 Ohm per side 16 Ohms Left and Right 16 Ohm per side DO NOT DO THIS!!! AD212 or AD412 Input Input 4 Ohm per side *This option is highly recommended! This will make you a rock star. OK, maybe not a rock star but you will sound great. If you don’t have this cabinet... you need it. If you have it... stop reading and get on with playi

Summary of the content on the page No. 6

NERDY IMPEDANCE INFORMATION AHEAD The following is some information that you’ll find useful for hooking external cabi- nets up your Valvetronix AD60VTX or AD120VTX combo. When you’re done with this, you’ll be a smarter and better person! Plus you’ll know the correct way for hooking up speaker cabinets in series. In multiple speaker cabinet configurations, you will have to use a little mathematics (Ohm’s law) in order to figure out the correct setting. Don’t worry though; it’s easier than you mig

Summary of the content on the page No. 7

Number of outputs: AD60VTX Rear panel: 1 x Loop send 1 x Phone out 1 x Line out 1 x Speaker out (Series connection with inside speaker) AD120VTX Rear panel: 2 x Loop send 1 x Phone out 2 x Line out 2 x Speaker out L ch: Speaker out (Series connection with inside speaker) R ch: Speaker out (Series connection with inside speaker) Speaker AD60VTX: CELESTION NeoDog (VOX original) x 1 AD120VTX: CELESTION NeoDog (VOX original) x 2 Power output AD60VTX: 60 Watts RMS AD120VTX: 60 Watts RMS x 2 (L/R) Tun

Summary of the content on the page No. 8