AudioSource 12-Channel Power Amplifier AMP1200 user manual

Summary of the content on the page No. 1

Twelve Channel
Multi-Zone Amplifier
AMP1200
Model: AMP1200
User Manual
www.audiosource.net

Summary of the content on the page No. 2

® Thank you for purchasing the AudioSource AMP1200 Twelve Channel Multi-Zone Amplifier. The versatility of the AMP1200 makes it the perfect choice for almost every type of custom multi-room audio system. Its tabletop or rack- mountable design allows it to be integrated easily into high-end whole house audio systems. FEATURES: • 12 channels (6 stereo zones) in one convenient enclosure • Manual, auto, or triggered on/off for integration into any • Stable Class AB design delivers superior audioph

Summary of the content on the page No. 3

REAR PANEL: 3. BUS Line Inputs / Outputs The AMP1200 has two common or BUS inputs that receives audio signals from standard line-level audio CLOSE UP OF CONNECTIONS sources and sends them to any or all channels. The BUS line outputs are direct feed-through to allow the BUS inputs to be fed to other amplifiers. Be sure to use high quality RCA cables that feature low impedance, shielding and high quality connectors. 4. Remote Turn-On Switch This switch selects the turn-on stimuli that will pu

Summary of the content on the page No. 4

TYPICAL 6 ROOM INSTALLATION AM/FM RECEIVER NOTES ABOUT HUM: SPECIFICATIONS: Rated Power Output: 40 Watts per channel RMS at 8 ohms While the AMP1200 has been designed to minimize the possibility Bridged Power Output: 80 Watts per channel RMS at 8 ohms of hum in the audio system, it is still possible that a hum will occur (8 ohm minimum) in rare circumstances. Its safety grounding can create a path for Input Sensitivity: 380 mV for full output with all level small amounts of 60 Hz energy t