Summary of the content on the page No. 1
AVR500 / AVR600 / AV888
H a n d b o o k AVR surround amplifier / AV processor
English
Summary of the content on the page No. 2
Class II product
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not safety CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified require a safety connection to electrical service personnel. earth (‘ground’ in the U.S.). guidelines WARNING: To
Summary of the content on the page No. 3
Class II produit
Ce produit est un appareil électrique à isolation double (appareil de classe II). Il a été conçu pour ne pas nécessiter de consignes ATTENTION : afin de réduire les risques de choc électrique, n’ouvrez pas le boîtier de l’appareil. Les pièces internes ne sont pas réparables connexion de sécurité à la terre (ou à la par l’utilisateur. Pour tout problème matériel, contactez des techni
Summary of the content on the page No. 4
F-2
Summary of the content on the page No. 5
Thank you and congratulations for purchasing your Arcam FMJ AVR500/AVR600 surround Contents amplifier or AV888 AV processor. safety guidelines .......................................E-2 Arcam has been producing specialist audio products of remarkable quality for over three welcome ......................................................E-3 decades and the new FMJ products are the latest in a long line of award winning Hi-Fi. The before you begin… ..................................E-4 welcome d
Summary of the content on the page No. 6
The AVR500/AVR600 is a high-quality and high- audio and video outputs for PVR and VCR recording, The AVR500/AVR600 surround amplifier and AV888 performance home-cinema processor and amplifier built as well as two digital outputs for digital recording of AV processor are both designed to produce a level of to Arcam’s quality design and manufacturing standards. digitised audio sources (AVR600/AV888 only). DVD- performance that will truly bring music and movies The closely related AV888 is a hom
Summary of the content on the page No. 7
Placing the unit Power Interconnect cables Radio interference < Place the unit on a level, firm surface, avoiding The amplifier is supplied with a moulded mains plug We recommend the use of high-quality screened cables The AVR500, AVR600 and AV888 are audio devices direct sunlight and sources of heat or damp. already fitted to the lead. Check that the plug supplied that are designed for the particular application. Other containing microprocessors and other digital < Do not place the unit on t
Summary of the content on the page No. 8
Trademark acknowledgements Arcam is a registered trademark of A & R Cambridge Ltd. FLAC Decoder Copyright © 2000, 2001, 2002, Ogg/Vorbis Decoder Copyright © 2002, This product is protected by certain intellectual Dolby Volume FLAC Ogg/Vorbis WMA & 2003, 2004, 2005, 2006, 2007, 2008 Josh Coalson Xiph.org Foundation property rights of Microsoft Corporation. Use Microsoft Manufactured under license from Dolby or distribution of such technology outside of DRM10 Laboratories. Dolby and the doubl
Summary of the content on the page No. 9
Before connecting your AVR500/AVR600 or AV888 Product differences and options and power amplifier (e.g. the Arcam P777) to your Product operation is broadly similar for the AVR500, source components and speakers, please read through AVR600 and AV888, however, the AVR600 & AV888 the next few pages which will explain all the input and have a greater variety of input connectors and a different output connectivity that is available. The ‘Speakers’ rear panel layout. For this reason, two sect
Summary of the content on the page No. 10
Video connectors digital connectors a erials, control and communication Component, S-Video and Optical and electrical digital Sirius satellite radio, FM/AM/DAB radio, rLead/ Composite connectors, see audio connectors, see page 10. rDock, RS232, Network/USB, IR and trigger AVR600 page 9. connectors, see page 20. a udio connectors AV888 Zone 2 and 3 connectors, see Two-channel and page 9. rear panel multichannel, see page 10. connectors
Summary of the content on the page No. 11
Zone 3 connectors Component/RGb video Zone 2 connectors connectors Z3 OUT Z2 AUDIO OUT, Z2 VIDEO OUT These inputs are suitable for connection to source Connect these Connect these analogue audio devices which output Component (YUV or YPbPr) or analogue audio and video outputs to your RGB high quality analogue video signals. These signals outputs to Zone 2 equipment. See ‘Multi- HdMI connectors are usu
Summary of the content on the page No. 12
d igital audio Phono a nalogue audio Front panel aUX input connectors inputs This input can be connected The front panel Au X input can be directly to a record deck used as an analogue or optical TAPE, CD, AV, DVD, SAT, VCR, PVR TAPE, CD, AV, DVD, SAT, VCR, which has a direct output digital input. PVR Connect these input
Summary of the content on the page No. 13
TRIG Z3 Trigger connectors Infra-red (IR) connectors Use for remotely turning on and off power amps or Z3 IR The trigger connectors (TRig Z1, TRig Z2 and TRig Z3) The infra-red inputs (Z1 iR, Z2 iR source equipment for Zone 3. On = 12V, Off = 0V. provide an electrical signal whenever the amplifier is and Z3 iR) allow the connection of This input is intended for use with an IR receiver in switched on and the relevant zone enabled. external IR receivers, either wh
Summary of the content on the page No. 14
Connection guide - AVR600/AV888
dVd player
The diagram shows how to make audio and video
� � connections from a typical DVD player. The preferred video hook-up, in order of preference is:
< use the HDMI connector (if HDMI output is provided by the player), otherwise connect the three � �
Component or four RGB+Sync v
Summary of the content on the page No. 15
Connecting an iPod using the a rcam rdock The combination of the AVR600/AV888 and Arcam’s
optional rDock or rLead accessory provides a great
platform for your iPod.
Connect the rDock as shown, power on the rDock, � slot in your iPod and select ipo D as the source. Set the Audio In iPod item in the ‘General Setup’ menu to the audio input that you have used to connect the rDock.
Summary of the content on the page No. 16
Video connectors digital connectors a erials, control and communication Component, S-Video and Optical and electrical digital FM/AM radio, DAB radio (optional), rLead/ Composite connectors, see audio connectors, see page 16. rDock, RS232, Network/USB (optional), IR and page 15. trigger connectors, see page 20. AVR500 a udio connectors Zone 2 connectors, Two-channel and see page 15. rear panel multichannel, see page 16. connectors VCR PVR Voltage select Ensure the voltage selected Speaker
Summary of the content on the page No. 17
Zone 2 connectors Z2 AUDIO OUT, Z2 VIDEO OUT Connect these analogue audio VCR and video outputs to your PVR Zone 2 equipment. See ‘Multi- HdMI connectors room Setup’ on page 50 for information. AV, SAT, DVD, VCR, PVR Connect the HDMI video outputs of your source equipment to these corresponding HDMI inputs. S-Video and Composite OUT 1 connectors Connect this output to the HDMI video input of your main zone display device. VCR, PVR OUT 2 Connect these in
Summary of the content on the page No. 18
d igital audio a nalogue audio MCH input Front panel aUX input connectors inputs This multichannel analogue The front panel Au X input can be audio input can be connected used as an analogue or optical TAPE, CD, AV, DVD, SAT, VCR, PVR TAPE, CD, AV, DVD, SAT, VCR, to a source device which digital input. PVR Connect these inputs to the digital outputs surround sound
Summary of the content on the page No. 19
IR OUT Trigger connectors Infra-red (IR) connectors This output is an electrical The trigger connectors (TRig Z1 & TRig Z2) provide an The infra-red inputs (Z1 iR and Z2 iR) allow the combination of the Z1 (or front electrical signal whenever the amplifier is switched on connection of external IR receivers, either when panel) + Z2 infra-red signals and the relevant zone enabled. the unit’s front panel IR receiver is fully or partially above. It can be used to drive obstructed or to allow
Summary of the content on the page No. 20
Connection guide – AVR500 dVd player The diagram shows how to make audio and video connections from a typical DVD player. The preferred video hook-up, in order of preference is: < use the HDMI connector (if HDMI output is provided by the player), otherwise connect the three Component or four RGB+Sync video connectors. In each case, connect the video inputs labelled DVD on the unit. The preferred audio hook-up is using the coaxial digital connector (usually marked Digi TAl Au Dio ou T), in
