Summary of the content on the page No. 1
DIGIMAX D8
8 Channel Preamplifier
with 24-bit/48 kHz ADAT out
User’s Manual
Version 1.0
© 2007, PreSonus Audio Electronics, Inc.
All Rights Reserved.
Summary of the content on the page No. 2
PRESONUS LIMITED WARRANTY PreSonus Audio Electronics Inc. warrants this product to be free of defects in material and workmanship for a period of one year from the date of original retail purchase. This warranty is enforceable only by the original retail purchaser. To be protected by this warranty, the purchaser must complete and return the enclosed warranty card within 14 days of purchase. During the warranty period PreSonus shall, at its sole and absolute option, either repair or rep
Summary of the content on the page No. 3
TABLE OF CONTENTS 1 OVERVIEW 1.1 Introduction ........................................................................................................................................... 3 1.2 Features ................................................................................................................................................ 4 1.3 What is in the Box ....................................................................................................................
Summary of the content on the page No. 4
Summary of the content on the page No. 5
OVERVIEW 1.1 INTRODUCTION Thank you for purchasing the PreSonus DigiMax D8. PreSonus Audio Electronics has designed the DigiMax D8 utilizing high-grade components to ensure optimum performance that will last a lifetime. The DigiMax D8 is an eight-channel microphone preamplifier, with 24-bit 48 kHz ADAT output, eight PreSonus X-MAX microphone preamplifiers, and BNC word clock in for digital sync. Loaded with 8 direct outputs, individual channel input metering and -20 dB pads on every
Summary of the content on the page No. 6
OVERVIEW 1.2 FEATURES The DigiMax D8 is high quality and affordable eight-channel preamplifier with analog to digital conversion, perfect for expanding an audio interface or digital mixer with ADAT input or upgrading the preamps on an analog console. The DigiMax D8 comes complete with eight high-quality PreSonus X-MAX microphone preamps, ADAT output, BNC word clock input, as well as input metering, direct analog output and -20 dB pads on every channel. Summary of features • 8 Class
Summary of the content on the page No. 7
OVERVIEW 1.3 WHAT IS IN THE BOX Your DigiMax D8 package contains the following: • DigiMax D8 Eight-channel microphone preamplifier • 6’ Standard IEC Power Cable • PreSonus Warranty Card 5 | PreSonus 2007
Summary of the content on the page No. 8
CONTROLS & CONNECTIONS 2.1 FRONT PANEL LAYOUT • Instrument Inputs (Channels 1 and 2). The ¼” TS connector on channels 1 and 2 are for use with an instrument (guitar, bass, etc.). When an instrument is plugged into the instrument input, the microphone preamp is bypassed, and the DigiMax D8 becomes an active instrument preamplifier. NOTE: Active instruments are those that have an internal preamp or a line level output. Active instruments should be plugged into a line input rather t
Summary of the content on the page No. 9
CONTROLS & CONNECTIONS • Clock. This button sets the DigiMax D8 to External digital sync or sets the Internal sample rate. o Press the Clock button once to set the clock to internal sync and your sample rate to 44.1 kHz. This will make the DigiMax D8 the Master clock of your system. It will be sending out word clock via the ADAT output. o Press the Clock button twice to set the clock to internal sync and your sample rate to 48 kHz. o Press the Clock button three times to set
Summary of the content on the page No. 10
CONTROLS & CONNECTIONS 2.2 BACK PANEL LAYOUT • Microphone Pre-Amplifier. Your DigiMax D8 is equipped with eight custom designed PreSonus XMAX microphone preamplifiers for use with all types of microphones including Dynamics, Condensers and Ribbons as well as instruments and line level signals. The award winning PreSonus preamplifier design is a Class A input buffer followed by a dual servo gain stage. This arrangement results in ultra low noise and wide gain control allowing the
Summary of the content on the page No. 11
CONTROLS & CONNECTIONS • BNC In. The BNC input allows the DigiMax D8 to be connected and slaved to an external word clock generator. • ADAT Output. This optical ADAT output sends eight channels of digital audio output. Word clock is also being sent through this output so you can use the DigiMax D8 as a clock master. • Power Adaptor Input. This is where you plug the provide IEC power cable into the DigiMax D8. • Power Switch. Push the top part of the switch to turn
Summary of the content on the page No. 12
OPERATION 3.1 MICROPHONES The DigiMax D8 works with all standard microphones including dynamic, ribbon and condenser microphones. 3.1.1 Condenser Condenser microphones tend to generate a high-quality audio signal and are one of the most popular mic choices for today’s studio recording applications. Because of their design technology, condenser microphones require a power source, which can be provided from a small battery, external power supply or from microphone inputs as phantom po
Summary of the content on the page No. 13
OPERATION 3.2 DIGITAL CONNECTIONS AND SYNCRONIZATION 3.2.1 ADAT Optical Lightpipe ADAT is an industry standard abbreviation for the ADAT Lightpipe protocol, which transfers eight tracks in a single fiber optic cable. Supported sample rates are 44.1 kHz and 48 kHz. When you are utilizing the eight DigiMax D8 preamplifiers and converting to the digital optical output, connect one ADAT optical cable from the ADAT output on the back of the DigiMax D8 to the ADAT optical input on your d
Summary of the content on the page No. 14
OPERATION 3.2.3 Master/Slave and Multiple Digital Devices Whether you are using the ADAT output of the DigiMax D8 to generate word clock or you are using the BNC word clock output of another device as your word clock generator, it is necessary to denote one device as the “master” word clock device to which all other digital devices are synced or “slaved”. The DigiMax D8 should perform equally well as a master or a slave in most cases, although syncing it to a lesser quality clock source
Summary of the content on the page No. 15
OPERATION 3.3 SAMPLE HOOK UP DIAGRAMS 3.3.1 Using the DigiMax D8 with ProTools The DigiMax D8 is the perfect solutions to expand your ADAT compatible Digidesign interface. For example: To set up a Digi 003 with ProTools LE software: 1. Plug in an ADAT cable from the optical output of the DigiMax D8 to the optical input of the Digi 003 2. Plug in a BNC word clock cable from the Digi 003 BNC word clock output to the BNC input of the DigiMax D8 3. Push the ‘clock’ button on the Dig
Summary of the content on the page No. 16
OPERATION 3.3.2 Using multiple DigiMax D8 with the FireStudio LightPipe The DigiMax D8 is a great low cost solution to expand your FireStudio LightPipe for live or mobile recordings where a large number of simultaneous inputs are needed and two track output is enough for monitoring. To clock more than one DigiMax D8 to the same external sync you will need a BNC T-Connector for each DigiMax D8 you are connecting to your system. This is called parallel clock distribution and will allow wo
Summary of the content on the page No. 17
OPERATION 3.3.3 Using the DigiMax D8 to Add Preamps to a Multiple Line Level Input Device The inputs of many audio interfaces and mixers are blended between microphone preamps and line level inputs. Balanced ¼” inputs are a great way to conserve space. Because of its direct analog outputs, the DigiMax D8 can also be used to add preamps to devices of this nature. It is important to note that when connecting two digital devices with an analog connection it is not necessary to use word clo
Summary of the content on the page No. 18
TECHNICAL INFORMATION 4.1 SPECIFICATIONS Microphone Preamp Type ............................................................................................................................. XLR Female Balanced Frequency Response (±0.5 dB) ............................................................................................... 20 Hz to 50 kHz Frequency Response (±3.0 dB) ............................................................................................. 20 Hz to 150
