Summary of the content on the page No. 1
INTEGRATED CIRCUITS
DATA SHEET
TDA6103Q
Triple video output amplifier
March 1994
Preliminary specification
File under Integrated Circuits, IC02
Philips Semiconductors
Summary of the content on the page No. 2
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q FEATURES GENERAL DESCRIPTION • High bandwidth: 7.5 MHz typical; 60 V (peak-to-peak The TDA6103Q includes three video output amplifiers in value) one single in-line 9-pin medium power (SIL9MP) package SOT111BE, using high-voltage DMOS technology, • High slew rate: 1600 V/μs intended to drive the three cathodes of a colour CRT. • Simple application with a variety of colour decoders • Only one supply voltage neede
Summary of the content on the page No. 3
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q PINNING SYMBOL PIN DESCRIPTION V 1 i1 V 1 inverting input 1 i1 V 2 i2 V 2 inverting input 2 i2 V 3 V 3 inverting input 3 i3 i3 GND 4 ground, fin GND 4 V 5 non-inverting input ip V TDA6103Q 5 ip V 6 supply voltage DD V 6 DD V 7 cathode output 3 oc3 V 7 oc3 V 8 cathode output 2 oc2 V 8 oc2 V 9 cathode output 1 oc1 V 9 oc1 MGA969 Fig.2 Pin configuration. LIMITING VALUES In accordance with the Absolute Maximum Rati
Summary of the content on the page No. 4
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q THERMAL RESISTANCE SYMBOL PARAMETER THERMAL RESISTANCE R from junction to fin; note 1 11 K/W th j-fin R from heatsink to ambient 18 K/W th h-a Note 1. An external heatsink is necessary. Thermal protection MGA972 The internal thermal protection circuit gives a decrease of 6 the slew rate at high temperatures: 10% decrease at 130 °C and 30% decrease at 145 °C (typical values on the 5 spot of the thermal protection
Summary of the content on the page No. 5
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q CHARACTERISTICS Operating range: T = - 20 to 150 °C; V = 180 to 210 V; V = 1 to 4 V. j DD ip 1 Test conditions (unless otherwise specified): T = 25 °C; V = 200 V; V = 1.3 V; V = V = V = ⁄ V ; amb DD ip oc1 oc2 oc3 2 DD C = 10 pF (C consists of parasitic and cathode capacitance); R = 18 K/W; measured in test circuit Fig.5. L L th h-a SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT I quiescent supply current 7.0 9
Summary of the content on the page No. 6
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT t settling time 50% input to V = 100 V square -- 350 ns s oc(p-p) (99% < output < 101%) wave; f < 1 MHz; t =t = 40 ns (pins 1, 2 r f and 3); see Figs 7 and 8 SR slew rate between V = V = V = 2 V - 1600 - V/μs 1- 5 2- 5 3- 5 50Vto(V - 50 V); (pins 7, 8 and square wave (p-p); DD 9) f < 1 MHz; t =t =40ns r f (pins 1, 2 and 3) O cathode output voltage overshoot V = 10
Summary of the content on the page No. 7
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q Test circuit C par R4 V DD 100 kΩ C11 C par 100 nF V R5 oc1 100 kΩ C13 R7 6.8 C1 C7 2 MΩ pF 6 C12 probe 1 3.2 22 μF 1 8.2 pF C14 pF V R8 i1 136 C2 R1 100 kΩ V 9 in1 pF 1 667 Ω 22 nF 0.987 mA C3 C8 V oc2 TDA6103Q 2 22 μF C16 8.2 pF R9 V i2 6.8 C4 2 MΩ R2 V pF 8 C15 in2 probe 2 2 3.2 667 Ω 22 nF C17 pF 0.987 R10 136 mA 100 kΩ pF C5 C9 22 μF 3 8.2 pF V i3 C6 R3 V V 7 in3 oc3 3 667 Ω C19 22 nF 0.987 5 R11 6.8 m
Summary of the content on the page No. 8
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q MGA973 200 194 188 V oc 100 5 0 1.2 0.633 0 0.583 1.1 1.2 ΔV i Fig.6 Typical low-frequency (f < 1 MHz) response of ΔV to V . i1, 2,3 oc1, 2,3 x V i 0 t x t s overshoot (in %) 151 150 140 V 149 oc 100 60 50 t t r MGA974 t pd Fig.7 Output voltage (pins 7, 8 and 9) rising edge as a function of the AC input signal. March 1994 8
Summary of the content on the page No. 9
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q x V i 0 t x t s 150 140 V oc 100 overshoot (in %) 51 60 50 49 t t f MGA975 t pd Fig.8 Output voltage (pins 7, 8 and 9) falling edge as a function of the AC input signal. March 1994 9
Summary of the content on the page No. 10
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q TEST AND APPLICATION INFORMATION March 1994 10 X1 C3 R24 R16 1 185 V 2 100 kΩ 47 Ω R5 R9 AQUA 3 R17 C6 R25 V ff 10 μF 220 Ω 3.3 kΩ 1.2 Ω 4 R10 V (GND) 100 kΩ ff (250 V) 680 Ω R13 470 Ω TDA6103Q EHT 1 2 3 4 567 89 C1 X3 R6 4 C5 R R7 R21 3 G 2 3.3 kΩ 100 R19 1.5 kΩ 470 Ω B kR R12 1 nF 220 680 Ω GND R22 A51EAL . . X02 kΩ kG R15 470 Ω 1.5 kΩ R20 kB C4 220 nF 1.5 R23 kΩ g1 g2 g3 1.5 kΩ C2 C7 R4 2.7 nF (500 V) R8
Summary of the content on the page No. 11
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q V GND DD 46 to from differential input stage TDA6103Q 1,2,3 circuit (1) 7,8,9 V bias from to to to input circuit differential differential differential stage stage stage 5 MGA971 (1) All pins have an energy protection for positive or negative overstress situations. Fig.10 Internal pin configuration. Dissipation Regarding dissipation, distinction must first be made between static dissipation (independent of fre
Summary of the content on the page No. 12
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q PACKAGE OUTLINE 22.00 21.35 21.4 20.7 15.1 3.85 14.9 3.45 2.75 3.4 1.75 2.50 3.2 fin 1.55 (2x) 8.7 8.0 5.9 5.7 4.4 4.2 18.5 17.8 6.48 6.14 12 3 4 5 67 8 9 1.1 0.7 0.76 3.9 3.4 0.45 0.47 1.0 1.0 2.54 0.25 0.38 0.3 0.7 2.54 (8x) 0.67 0.25 M 1.40 0.50 1.14 o (9x) 65 1.40 o 55 1.14 MBC376 - 1 Dimensions in mm. Fig.11 Plastic SIL-bent-to-DIL, medium power with fin, 9-pin (SOT111BE). March 1994 12 seating plane
Summary of the content on the page No. 13
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q SOLDERING Plastic single in-line packages BY DIP OR WAVE The maximum permissible temperature of the solder is 260 °C; this temperature must not be in contact with the joint for more than 5 s. The total contact time of successive solder waves must not exceed 5 s. The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the specified storage maximum. If the printe
Summary of the content on the page No. 14
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q NOTES March 1994 14
Summary of the content on the page No. 15
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q NOTES March 1994 15
Summary of the content on the page No. 16
Philips Semiconductors – a worldwide company Argentina: IEROD, Av. Juramento 1992 - 14.b, (1428) Pakistan: Philips Markaz, M.A. Jinnah Rd., KARACHI 3, BUENOS AIRES, Tel. (541)786 7633, Fax. (541)786 9367 Tel. (021)577 039, Fax. (021)569 1832 Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113, Philippines: PHILIPS SEMICONDUCTORS PHILIPPINES Inc, Tel. (02)805 4455, Fax. (02)805 4466 106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI, Metro MANILA, Tel. (02)810 0161, Fax. (02)817 3474 Austria
