Outlaw Audio 7900 user manual

Summary of the content on the page No. 1

Summary of the content on the page No. 2

Owner’s Manual Please Read First Installation Location Please Read First To assure proper operation and to avoid the potential for safety hazards, place the unit on a firm and level surface capable of supporting 150 pounds or more. When placing the amplifier on a shelf, be certain that the shelf and any mounting hardware can support the weight of the amplifier and any additional items in the equipment rack, or on the shelf. When positioning the amplifier in its final location, make certain th

Summary of the content on the page No. 3

Owner’s Manual Model 7900 7-Channel Power Amplifier Table of Contents Model 7900  Please Read First Seven-Channel Power Amplifier  Table of Contents  Features 4 Unpacking Congratulations! As the owner of an Outlaw Audio Multi-Channel Power Ampli- fier, you are in possession of a unique product. Designed and manufactured in 4 Rear Panel the United States, it has been meticulously constructed to deliver the best possible 4 Connecting Your Amplifier sonic performance. This manual covers the

Summary of the content on the page No. 4

Summary of the content on the page No. 5

Summary of the content on the page No. 6

Summary of the content on the page No. 7

Owner’s Manual Connecting Your Amplifier When using banana plugs, connections may be made by simply inserting the Remote Turn on Using External AC to DC Power Converter jack affixed to your speaker wire into the hole provided on the rear of the colored If your processor or receiver does not have a dedicated trigger jack, it is still screw caps on the binding posts. Before using banana type jacks make certain possible to activate the unit for automatic turn on when a Switched Outlet that the

Summary of the content on the page No. 8

Owner’s Manual Amplifier Operation Amplifier Operation Troubleshooting After all connections have been made, you are ready for listening. First, turn on Your Outlaw Multi-Channel Amplifier is designed for trouble free operation. the source components and processor in your system. Adjust your controller or If you follow the instructions in this manual you should enjoy many years of preamp to a low volume level to avoid damage to your speakers. Next, push the high quality listening enjoyment.

Summary of the content on the page No. 9

Owner’s Manual Troubleshooting Troubleshooting Guide Problem Solutions Amplifier will not turn on Master Power Switches turned off (No power light LED): Turn on both Master Power Switches. Remote trigger cable not properly connected: Verify connection of trigger cable at both ends. Amplifier turns on, but no audio from Input plugs not connected to proper jack or are loose: one or more channels Check input connections. Speakers not connected properly: Check speaker connections at amp and s

Summary of the content on the page No. 10

Owner’s Manual Model 7900 Specifications Potential Ground Loops in a Complex A/V System Model 7900 Specifications Suggestion #1: To determine if a cable TV connection is responsible for Power Output 7 x 300 watts @ 8 ohms, FTC: 20 - 20kHz, the hum, first turn all components off. Disconnect the cable TV feed to your 0.05% THD, All Channels Driven system at the first place where it connects to your components. Alternatively, disconnect the cable TV wire where it is connected at the wall outl

Summary of the content on the page No. 11

Summary of the content on the page No. 12