Mackie MUSIC CONTROLLER SP2400 user manual

Summary of the content on the page No. 1

REMOTE is a 3-pin Phoenix-type connector (continued from page 1)
for the optional wired remote control
Audio expansion connectors are provided
SP2400
(SP-41R), which provides Input Select on the rear panel for connecting multiple
Dual-Channel Program Controller/Amplifier
and Master Volume control.
SP2400s, with shared audio via balanced
busing. Each of the four program input signals
EXPANSION IN/OUT consists of two
Quick-Start Guide
can be independently assigned to the
parallel 25-pin D-Sub con

Summary of the content on the page No. 2

250Hz and 8kHz. HIGH is a shelving filter that provides 15 dB of boost and cut above 12kHz. AMP ADDRESS is used to assign a unique address to each amplifier, as well as to enable or disable features. Switches 1-5 provide 32 separate addresses, switch 6 determines Master/Slave status, switch 7 enables Input 4 Priority, and switch 8 enables the optional ambient mic. Front Panel Features The LOW variable control is a shelving DIRECT OUTPUT is a buffered line-level output providing the stereo signal