Summary of the content on the page No. 1
OWNER’S MANUAL
1
Speaker System
Coaxial
Summary of the content on the page No. 2
Coaxial Speaker System INTRO- Congratulations on your purchase of the Soundstream EXACT6.2 Coaxial Speaker DUCTION System. You now own one of the finest car audio sp eaker systems available. AND As with all high quality car audio components, professional installation is REGISTRATION recommended. Your dealer’s k nowledge and experience can ensure a problem - free, cosmetically integrated installation. If you plan on installing the EXACT6.2 speaker system yourself, please review this
Summary of the content on the page No. 3
EXACT 6.2 The EXA CT6.2 Coaxial Speaker System is the result of highly focused engineering effort. Each DESIGN element of the EXACT6.2 represents severa l advances in automotive speaker technology. • High performance sound reproduction in the automotive environment • Ease of installation • • High output capability • Ability to “tailor” sound to each vehicle Through extensive testing and development, the EXACT6.2 has been designed to provide extremely consistent on and off - axis re
Summary of the content on the page No. 4
LOCATION T he first step in a successful installation is thorough planning. Choose the location for AND your speaker components carefully. Fo llow these suggestions to ensure proper imaging and the best performance: MOUNTING • Choose a location that offers the least obstruction of sound to your ears. • Always check behind the chosen mounting locations to make sure that there are no obstructions (e.g., trunk springs, gas tank, window tracks) or wires in the way, as well as to make sure
Summary of the content on the page No. 5
INSTALLING The EXACT6.2 Driver can be mounted on the front or rear of a panel; gaskets are THE EXACT6.2 provided for both options. The bolt hole config uration will fit a variety of standard DRIVER American, Asian and European OEM patterns making it ideal for direct replacement. Best p erformance is achieved when the speaker is securely mounted to a door panel or rear deck. There should be no gaps between the s peaker and the mounting surface, as this will impair its low frequency perf
Summary of the content on the page No. 6
MOUNTING The EXACT6.2X Passive Crossover can be mounted in virtually any location inside the THE vehicle. Be sure not to mount the EXACT6.2X outside the vehicle, or in a location where it may be exposed to dirt or moisture (e.g., the engine compartment, inside a EXACT6.2X wheel housing, inside a door, at the bottom of a leaky trunk). CROSSOVER TWEETER Tweeter Attenuation LEVEL The EXACT6.2 system has been designed to provide optimum sound in a variety of installation locations. The p
Summary of the content on the page No. 7
DYNAMIC Tweeter Protection Activation TWEETER Under high power/high volume conditions, the dynamic tweeter level control (DTLC) LEVEL circuit may activate. The purpose of DTLC is to prevent failure of the tweeter by reducing its output when necessary. You will notice a decrease in high frequency CONTROL output an d the light bulb on the crossover board will light up (see Figure 3). The circuit is self - resetting if the DTLC activates , turn the volume down and normal operation will
Summary of the content on the page No. 8
WIRING Wiring Diagram Figure 4 shows a diagram illustrating the wiring of the EXACT6.2 Component Speaker System. It is important to m ake sure that all connections are in phase; that is positive (+) is connected to positive (+), and negative ( - ) is connected to negative ( - ), since an out - of - phase connection will cause a dislocated image and low bass output. The provided cable harness is color coordinated to aid proper connection of crossovers to speakers; wire colors should mat
Summary of the content on the page No. 9
IMPORTANT! Bi-Wiring NOTES CUT THE TWO JUMPER WIRES IN THE 6.2X The EXACT6.2 system includes the ON CROSSOVER FOR ANY EXACT6.2X passive crossover which BI-AMP OR BI-WIRING APPLICATION BI-AMPING is optimized for the speakers. The EXACT6.2X allows for dual amp inputs. See Figure 5. This feature allows for a 4 channel amplifier or two 2 channel amps to power the four individual drivers of an EXACT6.2 system. The benefit of this is added dynamics and level setting flexi
Summary of the content on the page No. 10
NOTES IMPORTANT! Bi-Amping CUT THE TWO JUMPER WIRES IN THE 6.2X True bi - amping can also be ON CROSSOVER FOR ANY accomplished with an external electronic BI-AMP OR BI-WIRING APPLICATION BI-AMPING crossover. See Figure 6. Even greater (CONT'D) dynamics can be reali zed with bandwidth limited amplifiers. If you decide to bi - amp, please follow the recommendations below : 1) Use at least a 12dB/octave high pass filter no higher than 1500 Hz on the tweeters. 2) Use at lea
Summary of the content on the page No. 11
SPECIFICATIONS EXACT6.2 System Specifications - Sensitivity 90 dB SPL at 1 meter (2.83v) 96 dB SPL at .5 meter (2.83v) Nominal Impedance 4 Ω 24 dB/octave ASC 3.25” (W) x 1.5” (H) x 5.125” (D) EXACT6.2 Midrange/Woofer - Sensitivity 90 dB SPL at 1 meter (2.83v) Nominal Impedance 4 Ω Nominal Driver Diameter - Out Diameter Soft Dome Neodymium Tweeter - Sensitivity 90 dB SPL at 1 meter (2.83v) Nominal Impedance 4 Ω Nominal Tweeter Diameter 25mm 11
Summary of the content on the page No. 12
(Rev A, 4/15/97) 12 fax 916.351.0414 tel 916.351.1288 120 Blue Ravine Road Folsom California 95630 USA
Summary of the content on the page No. 13
(Rev A, 4/15/97) 13 fax 916.351.0414 tel 916.351.1288 Folsom California 95630 USA 120 Blue Ravine Road GRILL RING EDGE OF PILOT HOLE CUT-OUT CENTER MOUNTING TEMPLATE
