Summary of the content on the page No. 1
UBRC13
ACCESSORY CAMERA
Owner’s Manual
Compatible with
UBR223 and UBR243 Wireless
Baby Monitoring Systems
If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!
Need help? Get answers 24/7 at our website:www.uniden.com.
CUSTOMER CARE
At Uniden®, we care about you!
If you need assistance, please do NOT return this
product to your place of purchase. Our customer
care specialists are available to serve you.
Quickly find answers to your quest
Summary of the content on the page No. 2
IMPORTANT SAFETY PRECAUTIONS # This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: x The UBRC13 camera is NOT weatherproof. It is an indoor camera x To avoid any risk of electric shock from lightning, avoid
Summary of the content on the page No. 3
parental supervision. Always be sure that both the transmitter and receiver are working properly, and are within range of each other. x STRANGULATION HAZARD. Keep the adapter cords out of the reach of children. x WARNING: KEEP OUT OF THE REACH OF CHILDREN. This product is not a toy and is not intended for use by any children under the age of 13. If you are between the ages of 13 and 18, review these terms, conditions and safety warnings with your parents or guardian to make sure that y
Summary of the content on the page No. 4
WHAT’S IN THE BOx • Digital Wireless Camera (1) • AC Adapter for Camera (1) • Mounting screws (1 set) • Suction Cup Mounting Bar (1) • Owner’s Manual (1) # If any items are missing or damaged, contact our Customer Care Line immediately! PARTS OF THE CAMERA Left side Front Right side NOTE: The RESET button 1 is on the back. 16 10 17 6 2 7 11 8 18 15 3 9 19 12 20 14 13 4 5 Item What it is 1 Camera Antenna: Sends and receives signals to or from the monitor. 2 Temperature sensor: Detects tempe
Summary of the content on the page No. 5
Item What it is 10 LED night light bars. 11 IR LEDs (Covered): Infrared LEDs provide viewing in no/low light conditions. 12 Light sensor: Measures light intensity on the camera side. 13 Lens: Camera lens. 14 Microphone: Receives sounds for the area near the camera, and transmits sound from the camera to the monitor. 15 Speaker: Produces the sound transmitted from the monitor. 16 POWER: Turns the camera ON or OFF. 17 NIGHT lIGHT : Press to turn the night light ON or OFF. 18 Charging LED:
Summary of the content on the page No. 6
2. Drill holes and insert the anchors and screws provided. Be sure to leave room for the stand to fit over the screw heads. 3. Place the stand over the installed screws and push it downwards, locking it into place. WALL 4. Adjust the camera as needed. Suction Mount 1. Insert the suction base into the base clip as shown: 2. Firmly press the camera with the suction base attached onto glass or metallic surfaces. 3. Adjust the camera as needed. Clip-Mount Clip the UBRC13 on ledges and shelv
Summary of the content on the page No. 7
Connect Power 1. Insert the AC adapter power plug into the camera’s DC adaptor input jack. 2. Plug the other end into a 120 volt AC (standard indoor) power outlet or surge protector. 3. Press POWER and make sure the green power LED turns on. If it doesn’t, try reconnecting the AC adapter, making sure the power outlet isn’t controlled by a wall switch. PLAYING LULLABIES 1. To control the lullabies from the monitor, decide which camera you want to play lullabies and make it the full scre
Summary of the content on the page No. 8
Modulation type GFSK Data Rate 2 Mbps Communication range 500 ft Line of Sight CAMERA Image Sensor Type - 1/6.5” Color CMOS Effective Pixel 640 x 480 Image Processing MJPEG Lens 3.0mm / F2.8 Exposure Auto White Balance Auto Power Requirement 5.0VDC +/–5% Power Consumption 150mA Max (IR OFF) 730mA Max (IR ON) 440mA Max (Charging) Operating 14°F ~ 104°F ( –10°C ~ Temperature Range 40°C ) Operating Humidity Within 80% RH Range RoHS Compliance Yes Housing Material Plastic RECYCl ING ANd dISPOSA l
Summary of the content on the page No. 9
fCC C OMPl IANCE INfORMATION PART 15 COMPl IANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device. This equipment has been tested and found to comply with limits for a Class B digital
Summary of the content on the page No. 10
Rf Ex POSURE INf ORMATION The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm (7.9”) from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. IC COMPl IANCE INfORMATION RAd IO Eq UIPMENT NOTICE The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this de
Summary of the content on the page No. 11
WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect 12 months after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or
Summary of the content on the page No. 12
so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also have other rights which vary from state to state. This warranty is void outside the United States of America & Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner’s manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). Disconnect
