Summary of the content on the page No. 1
Contents
7.1ch Home Theater Speaker Package
Getting Started
Important Safety Instructions........... 2
HTP-750X
Precautions ....................................... 3
Speaker Precautions ......................... 3
Front Speakers (SKF-750XF L/R)
Center Speaker (SKC-750XC)
Package Contents........................... 5
Surround Speakers (SKM-750XS L/R)
Getting to know Your Speaker
Surround Back Speakers (SKB-750X L/R)
Package....................................... 6
Subwoofer (SKW-7
Summary of the content on the page No. 2
WARNING: WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within CAUTION: the product’s enclosure that may be of sufficient TO REDUCE THE RISK OF ELECTRIC SHOCK, magnitude to constitute a risk of el
Summary of the content on the page No. 3
Precautions Speaker Precautions 1. AC Fuse—The AC fuse inside the unit is not user- Placement serviceable. If you cannot turn on the unit, contact • The subwoofer cabinet is made out of wood and is your Onkyo dealer. therefore sensitive to extreme temperatures and 2. Care—Occasionally you should dust the unit all humidity, do not put it in locations subject to direct over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild det
Summary of the content on the page No. 4
Speaker Precautions—Continued Speaker care Wipe the cabinet occasionally with a dry silica or soft cloth. For heavier dirt, after dampening a soft cloth in a weak solution of mild detergent and water and wringing it out dry, wipe off the dirt. Then, dry immediately with a clean cloth. Do not use rough material, thinners, alco- hol or other chemical solvents or cloths since these could damage the finish, remove the panel lettering, or cause discoloration. If you are using
Summary of the content on the page No. 5
Package Contents Make sure your box contains all of the items below. If anything is missing, contact the nearest Onkyo dealer. Speaker Package HTP-750X Speaker Stand AS-140 • Front speakers • Screws (large) [2] (SKF-750XF) • Screws (small) [4] Speaker cables for the left and right front speakers have been attached to the speaker stand AS-140. • Center speaker • Speaker cable for center • Pipe stands [2] (with the speaker cables wired) (SKC-750XC) speaker 10 ft. (3 m) • Base panels [2] (
Summary of the content on the page No. 6
Getting to know Your Speaker Package Front, Center, Surround, and Speaker Stand Surround back speakers (SKF-750XF, Follow the steps below to install each front speaker onto SKC-750XC, SKM-750XS, SKB-750X) a speaker stand. Loosen the bundled speaker cable, insert 1 Rear the cable into the hole of the base panel from the top, then pull the cable out and downward. Pipe stand Speaker cable 1 3 Base panel surface 2 Do not pull the speaker cable too hard, as it may brea
Summary of the content on the page No. 7
Getting to know Your Speaker Package—Continued While pressing in the lever on the speaker Completed. 4 7 terminal on the rear panel of the speaker, connect the speaker cable to the terminal. The supplied speaker cables are color-coded for easy identification. Simply connect each cable to the same-colored positive speaker terminal. Speaker rear panel Caution: To remove the speaker from the stand, remove the screw, slide the speaker upward to release the (1) Insert the ho
Summary of the content on the page No. 8
Getting to know Your Speaker Package—Continued Caution: Wall Mounting A mounting screw’s ability to support a speaker depends The speakers can easily be wall mounted by using the on how well it’s anchored to the wall. If you have hollow keyhole slots. To prevent the speaker from vibrating walls, screw each mounting screw into a stud. If there are against the wall, attach four of the supplied spacers to the no studs, or the walls are solid, use suitable wall anchors. keyhole fins
Summary of the content on the page No. 9
Getting to know Your Speaker Package—Continued Subwoofer (SKW-750X) If the subwoofer is placed on a hard floor (wood, vinyl, tile, etc.) and playback is very loud, the sub- woofer's feet may damage the flooring. To prevent ■ Front this, place the supplied pads underneath the subwoofer's feet. The pads also provide a stable base for the subwoofer. Setting the Subwoofer Level To set the level of the subwoofer, use the OUTPUT 1 LEVEL control. Set it so that bass sounds are even
Summary of the content on the page No. 10
Connecting the Speakers Read the following before connecting your speakers: Connecting the Speaker Cables •Turn off your receiver or amp before making any con- nections. Use the supplied cables to connect each speaker’s input terminals to the corresponding • Disconnect the power cord from the wall outlet before speaker output terminals on your receiver. making any connections. Match the color of each cable to the corresponding •Pay close attention to speaker wiring polarity. Connect speak
Summary of the content on the page No. 11
Troubleshooting Symptom Possible cause Remedy The speaker cables are not connected properly. Check the speaker cables and correct as necessary. There’s no sound coming from certain speakers? The speaker configuration is not set correctly. Check the speaker configuration. The power plug is not fully inserted into the Insert the power plug fully into the wall outlet. The subwoofer does not wall outlet. turn on? The OUTPUT LEVEL control is set to mini- Turn up the OUTPUT LEVEL control. mum. The RCA
Summary of the content on the page No. 12
Specifications ■ Powered Subwoofer (SKW-750X) ■ Surround/Surround Back Speaker Type: Bass-reflex (SKM-750XS/SKB-750X) Input sensitivity/impedance: 140 mV / 20 kΩ Type: 2 Way Closed Type Maximum output power: 290 W (Dynamic Power) Impedance: 8 Ω Frequency response: 25 Hz–150 Hz Maximum input power: 110 W Cabinet capacity: 1.3 cubic feet (37 L) Output sound pressure level: 76 dB/W/m Dimensions (W × H × D): 10-13/16" × 19-15/16" × Frequency response: 60 Hz–50 kHz 16-3/16" Crossover frequency: 3 kH
