EAW SB250zR user manual

Summary of the content on the page No. 1

SB250zR S pecifications group · J
DUAL 15 INCH SUBWOOFER
See NOTES TABULAR DATA for details, half space = floor-mounted
CONFIGURATION
Subsystem
Transducer Loading
SUB 2x 15 in cone Vented
Operating Mode
Amplifier Channels External Signal Processing
Single-amp LF1/LF2 DSP w/1-way filter
Dual-amp LF1, LF2 DSP w/1-way filter
1
PERFORMANCE
Operating Range 36 Hz to 150 Hz
Nominal Beamwidth
Horz 360°
Vert 360°
Axial Sensitivity (SPL)
LF1/LF2 (whole space) 96 dB 36 Hz to 150 Hz
(half space) 102 d

Summary of the content on the page No. 2

SB250zR S pecifications group · J ENCLOSURE Material Baltic birch plywood Finish Wear resistant textured black paint Grille Powder-coated perforated steel NOTE: This drawing has been reduced. Do not scale. Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel 800 992 5013 / 508 234 6158 fax 508 234 8251 www.eaw.com EAW products are continually improved. All specifications are therefore subject to change without notice. Part Number: RD0227 (A) SB250zR April 2005 8X

Summary of the content on the page No. 3

SB250zR S pecifications group · J PERFORMANCE DATA See NOTES GRAPHIC DATA for details Frequency Response: Processed LF1/2 Whole Space = green 10 0 -10 -20 -30 -40 -50 10 100 1000 20000 Frequency (Hz) Frequency Response: Digital Signal Processor Frequency Response: Unprocessed LF = green LF1/2 Whole Space = green 120 20 110 10 100 0 90 -10 80 -20 70 -30 60 -40 10

Summary of the content on the page No. 4

SB250zR S pecifications group · J INPUT PANEL SIGNAL DIAGRAM SB250zR 1-Way, Single-Amp (LF1/LF2) S/N WHITINSVILLE, MA USA DSP LF EQ LIECHTENSTEIN LIECHTENSTEIN AMP HPF LPF LF PIN 1--...LF1-- PIN 1+...LF1+ PIN 2--...LF2-- PIN 2+...LF2+ NL4 MPR NL4 MPR N NL4 MPR L4 MPR 1-Way, Dual-Amp (LF1, LF2) AMP LF DSP EQ HPF LPF AMP LF LEGEND DSP: User-supplied Digital Signal Processor. HPF: High Pass Filter for crossover or specified High Pass Filter. LPF: Low Pass Filter for crossover. LF/MF/HF: Low F