Tamron A10 user manual

Summary of the content on the page No. 1

AF 19 - 35 mm F/3.5 - 4.5
(Model A10)
Thank you for purchasing this Tamron lens. Please
read this owner's manual carefully before using your
new lens. Proper care and maintenance of this lens
will result in years of enjoyable use.

Summary of the content on the page No. 2

Summary of the content on the page No. 3

Summary of the content on the page No. 4

DESCRIPTION OF PARTS 1. Focusing ring 2. Focus distance scale 3. Focus distance index 4. Zooming ring 5. Zooming scale 6. Tripod socket 7. Tripod socket fixing screw 8. Zoom index 9. Lens mounting guide 10. AF/MF selector switch 11. Aperture / Zoom index 12. Aperture ring 13. Aperture scale 14. AE (minimum aperture) lock 15. Hood attaching index 16. Magnification scale 17. Depth-of-field scale 18. Infrared index 19. Macro selector switch 6~7 are for Model 175D only 9 is for Canon/Minolta only 10

Summary of the content on the page No. 5

* Length and maximum diameter indicate the values for the lens with the Nikon mount. * Specifications and design are subject to change without notice. MOUNTING/REMOVING THE LENS Mounting After removing the rear cap, place the lens in the camera mount aligning the lens mount index line with that of the camera body (Canon/Minolta/Pentax). For Nikon models, align the lens mount index line with the dot on the camera. Rotate the lens clockwise until it click-locks (counter-clockwise in case of Nikon

Summary of the content on the page No. 6

ZOOMING To set your lens to the desired image composition you desire, simply look through the viewfinder and operate the zoom ring. APERTURE CONTROL & AE SETTING Canon / Minolta Your camera controls the aperture depending on the shooting mode in use. Although the aperture value varies in accordance with zooming, the camera itself reads out the change to provide automatic compensation. Nikon / Pentax When shooting in programmed AE or shutter-priority AE mode, rotate the aperture ring to the minim

Summary of the content on the page No. 7

Fig. 10 Fig. 9 Detaching tripod-attaching base Altering camera between vertical & horizon- 1. Loosen lock knob by rotating knob coun- tal positions 1. Loosen lock knob by rotating knob coun- terclockwise. 2. Pull out lock knob slightly. terclockwise. 3. Turn attaching ring upward while holding 2. Turn camera and lens so as position align- locking knob. ment marks meet each other. * When detaching tripod-attaching base, 3. Tighten lock knob by rotating knob clock- wise. hold camera and lens secur

Summary of the content on the page No. 8

PRECAUTIONS IN SHOOTING (con’t) Certain camera models may indicate the maximum and minimum aperture values of the lens in approximate numbers. This is inherent to the design of the camera and not an indication of error. Do not use the lens hood when you shoot with your camera's built-in flash. Even with- out the lens hood, an arched-shape shadow may be observed at the bottom portion of the picture when using the built-in flash. Tamron recommends using an optional flash unit (clip- on grip typ