ProMaster Vectra Mic1 Stereo Microphone Mic1 user manual

Summary of the content on the page No. 1

Infrared Remote Control – for Canon
Replaces Canon RC-1/RC-6 Infrared Remote Control



Upper Controls of Remote (For SLR Camera)


S button for camera instant shutter.

2S button for 2seconds delay shutter.


Lower Controls of Remote(For PowerShot Camera)

S button for camera instant shutter.


W/T controls Canon PowerShot zoom


IMPORTANT NOTICE
Your PROMASTER Remote Control features a POWER SAVE mode. Please observe the following to
ensure proper operation:

1

Summary of the content on the page No. 2

To Replace the Battery 1. The remote control is powered by a three-volt CR2025 lithium battery which is included. 2. After sliding the latch in the direction shown, remove the battery holder. 3. Remove the battery from the battery holder. 4. Insert a fresh battery with the face marked "+" on top. 5. Slide the battery holder into the remote until the latch clicks into place. Specifications  100% compatible with Canon RC-1/RC-6 infrared remote control.  Works with all remote shutter

Summary of the content on the page No. 3

Compatible Canon DSLR/SLR Cameras (uses upper controls only) 550D 500D 450D 400D 350D 300D Rebel XSi Rebel T1i Digital SLR Rebel T2 Rebel XT Rebel XTi Rebel T2i ELAN 10 30 33 50 55 100 300v Film SLR 300x 3000v QD Rebel K2 Rebel T1 Date Rebel T2 Date Kiss III Kiss III L A10 EOX IX APS SLR Compatible Canon Power Shot Cameras (uses lower controls only) Pro 1 G6 G5 G3 Power Shot G2 G1 S1 IS S70* S60* Pro 90 IS *Shutter release function only LIMITED WARRANTY This product car