Summary of the content on the page No. 1
USER MANUAL
B950
Summary of the content on the page No. 2
CONTENTS 1. Introduction 2. Unpacking 3. Connectors/Cabling 4. Polarity Checking 5. Amplification & Power Handling 6. Crossovers 7. Equalisation 8. Positioning 9. Dimensions 10. Performance Data 11. Technical Specifications 12. Recommended Service Parts & Accessories 13. Warranty 14. Declaration of Conformity
Summary of the content on the page No. 3
1. Introduction SuperDual sound reinforcement systems to below 30 Hz, making it ideal for effects in club, theatre and concert sound reinforcement. Where ultra-low frequency pressure levels with extremely low distortion while maintaining a uniform frequency consistent intelligibility and tonal quality at any listening level. braced optimally vented enclosure. Ruggedly constructed from multiple-ply 2. Unpacking Every Tannoy product is carefully inspected before packing. After unpacking your immed
Summary of the content on the page No. 4
For a worldwide list of distributors, please contact Neutrik directly: - N EUTRIK AG: (damping factor). will be perfectly satisfactory under normal conditions. In the case of very long cable CABLE RUN C.S.A. OF EACH CABLE % POWER LOSS % POWER LOSS (m) CONDUCTOR (mm) RESISTANCE Ω Ω INTO 8Ω Ω LOAD INTO 4Ω Ω LOAD 10 2.5 0.14 1.7 3.5 4.0 0.09 1.1 2.2 6.0 0.06 0.73 1.5 25 2.5 0.35 4.3 8.6 4.0 0.22 2.7 5.4 6.0 0.14 1.8 3.6 50 2.5 0.69 8.6 17.0 4.0 0.43 5.4 11.0 6.0 0.29 3.6 7.2 100 2.5 1.38 17.0 35.0
Summary of the content on the page No. 5
5. Amplification & Power Handling voice coil thermal capacity. Care should be taken to avoid running the amplifier into clip (clipping is the end result of overdriving any amplifier). Damage to the loudspeaker will be sustained if the amplifier is driven into clip for any extended period of time. Headroom of at least 3dB should be allowed. When evaluating an amplifier, it is important to take into account its behaviour under low impedance load Generally a higher power amplifier running free of d
Summary of the content on the page No. 6
8. Positioning to great effect in producing the desired sound quality without the aid of additional amplification. reference level, or 0 dB SPL. If we now place a large reflective surface (i.e., a wall, ceiling or floor) next to the available amplifier power). The loudspeaker is radiating its power into half as much space, half space loading Coupling, or placing bass cabinets together will also increase bass output. while the highs remain unchanged. position full range loudspeakers next to a bou
Summary of the content on the page No. 7
9. Dimensions 1110.0 576.0 2 HANDLES BOTH ENDS 650.0 160.0 145.0 125.0 450.0 B950
Summary of the content on the page No. 8
10. Performance Data
Summary of the content on the page No. 9
11. Technical Specifications Frequency response (1) +/- 3dB Recommended Amplifier Power Power Handling Sensitivity (1) 2.83 volt @ 1m Maximum SPL (3) @ 1m Impedance Distortion 0.1 Full Power 2nd Harmonic 3rd Harmonic 100 Hz % 250 Hz % 0.01 Full Power 100 Hz 250 Hz % Driver Compliment Crossover Point Enclosure Finish Protective Grille Connectors Rigging/Fittings Dimensions Weight NOTES: Please verify the latest specifications when dealing with critical applications. methods
Summary of the content on the page No. 10
12. B950 Service Parts & Accessories Part Number Description 7900 0390 Driver Kit - 4501 Paint - Touch up Black-Grey UK 220/240V EUR 220/240V AUS 220/240V TannoyTX3 Active System Controll USA 100/120V JAP 100/120V HK 220/240V system UK 220/240V Tannoy TDX1 Digital loudspeaker management system EUR 220/240V Tannoy TDX1 Digital loudspeaker management system AUS 220/240V Tannoy TDX1 Digital loudspeaker management system USA 100/120V noy TDX1 Digital loudspeaker management system JAP 100/120V Tann
Summary of the content on the page No. 11
Declaration of Conformity The following apparatus is/are manufactured in the United Kingdom by Tannoy Ltd of Rosehall Industrial estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives relevant to Domestic Electrical Equipment. The apparatus is designed and constructed such that electromagnetic disturbances generated do not exceed levels allowing radio and telecommunications equipment and other app
Summary of the content on the page No. 12
Tannoy Loudspeakers are manufactured in Great Britain by : Tannoy Ltd, Rosehall Industrial Estate, Coatbridge, Strathclyde, ML5 4TF, SCOTLAND Telephone: +44 (0)1236 420199 Fax: +44 (0)1236 428230 Internet:http://www.tannoy.com th JULY 1998 GH 25 Issue 2 Part No. 6481 0249 Group of Companies Tannoy is a member of the Telephone: (010) 2860554 Fax: (010) 2860431 Tannoy Nederland BV, Anthonetta Kuijlstraat 19, 3066 GS, Rotterdam THE NETHERLANDS Telephone: (519) 745 1158 Fax: (519) 745 236
