Mamiya RZ67 user manual

Summary of the content on the page No. 1

MAMIYA Interface Plate
To use the KODAK PROFESSIONAL DCS Pro Back or DCS Pro Back Plus (Pro Back/Pro Back Plus)
with the MAMIYA RZ67 PRO II camera body (MAMIYA camera body), you must first attach the
MAMIYA Interface Plate to the camera body.
1. Insert the four studs on the MAMIYA camera body into the four holes on the MAMIYA Interface
Plate.
2. Slide the Lock handle downward to secure the plate to the camera body.
Lock handle
3. Turn the lever on the Cable Release plug to O. (Refer to the pi

Summary of the content on the page No. 2

4. Attach the Pro Back/Pro Back Plus to the MAMIYA Interface Plate as described in the DCS Pro Back or DCS Pro Back Plus User’s Manual. 5. Once the Pro Back/Pro Back Plus is attached, lock the Shutter Release on the camera body by rotating the Shutter Release lock as described in your RZ67 PRO II instruction manual. Use the Release button on the Capture cable to capture images. (The Shutter Release on the camera body will not capture digital images.) Release button 6. On the side of the ca

Summary of the content on the page No. 3

Electromagnetic Cable Release Orange dot Long time lever Cable Release plug White dots Release button Release Button The Release button is a two-step position button. Each position provides a different function.  Lightly press the Release button halfway down to collect photometric data.  Press the button fully down to perform a shutter release. When the two white dots are aligned, the ring is in the correct position for metering and shutter release. When taking long time (LT) exposures in Bul