NHT S-00 Powered user manual

Summary of the content on the page No. 1

S-00
Powered
Subwoofer
Owner’s Manual
Serial Number:
Copyright 2001 NHTPro, a Recoton CorporationBrand

Summary of the content on the page No. 2

Safety Instructions -- Please Read First CAUTION CAUTION: To reduce the risk of electric shock, do not remove the cover. No user serviceable parts are inside; refer servicing to qualified personnel. RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of fire or electric shock do not expose this WARNING: SHOCK HAZARD-DO NOT OPEN. appliance to rain or moisture. AVIS: RISQUE DU CHOC ELECTRONIQUE- NE PAS OUVRIR. This symbol, wherever it appears, alerts you to This symbol, wherever it appe

Summary of the content on the page No. 3

INTRODUCTION: Thank you for your purchase, and congratulations on your selection of the NHTPro S-00 powered subwoofer. The S- 00 will add dynamic bass response to any pair of powered mini-monitors, or can be used to reproduce the .1 LFE channel for surround mixing. While the S-00 was designed to mate seamlessly with the NHTProM-00 monitor system, you'll soon come to appreciate the extraordinary performance advantages this subwoofer will bring to your system regardless of the application. Investi

Summary of the content on the page No. 4

USER CONTROLS: Sub Level Control: 1 The subwoofer level control matches the S-00 output level to the satellite monitors. This control differs from most as it doesn't turn the woofer all the way off, but offers a 20dB range of adjustment. Fully clockwise, output is maximum (0 dB). In the counter clockwise position, the sub output is attenuated by 20dB. Low Pass (LP) Frequency Control: 2 This control allows fine adjustment of the subwoofer crossover point to match the point where the satellites ro

Summary of the content on the page No. 5

CONNECTING THE S-00 SUBWOOFER: Using the S-00 as a .1 or LFE stand-alone device: Connect either an RCA, XLR or TRS from your designated LFE channel or buss output assignment to either the left or right input on the S-00 “INPUT SECTION”. If more subwoofer sensitivity is required, use a “Y” adaptor and connect to both left and right inputs. Be sure to utilize surround test tone signals to properly balance the woofer level with the other monitor channels. Please read through the Subwoofer Placement

Summary of the content on the page No. 6

SUBWOOFER PLACEMENT: Where you locate the S-00 subwoofer will have a profound effect on the system's performance. Unfortunately, there are no hard and fast rules to find the best location. If you have some flexibility, we encourage you to experiment. The following guidelines should help you in your placement decisions: Placement near walls and corners will reinforce low frequencies; conversely, placement out into open space will add definition, but will reduce bass weight and extension. Ideally,

Summary of the content on the page No. 7

SYSTEM: Type: Integrated, self powered subwoofer Configuration: Acoustic Suspension Woofer: 8” high-excursion, treated paper FEATURES/CONTROLS: Input Connectors: XLR, TRS, RCA Output Connectors: TRS Switchable Input Sensivity: +4dB, -10dB Continuously Variable Gain: 0 ~ -20dB Continuously Variable Low Pass Frequency. Switchable High Pass Frequency. Subwoofer Bypass via outboard footswitch. SPECIFICATIONS: Amplifier Power: 125W RMS, 250W peak (500ms) Peak Acoustical Output: 108 dB SPL @ 60 Hz Cro

Summary of the content on the page No. 8

NHTPro 6400 Goodyear Rd. Benicia, CA 94510 Phone (707) 748-5940 fax (707) 747-1252 www.nhtpro.com