Summary of the content on the page No. 1
HD MEMORY CARD CAMERA RECORDER
INSTRUCTIONS
GY-HM700U
GY-HM700CHU
GY-HM700E
GY-HM700CHE
* The illustration shows the GY-HM700E with the supplied viewfinder, microphone and lens attached.
* GY-HM700CHU/GY-HM700CHE does not come with a lens.
Please read the following before getting started:
For Customer Use:
Enter below the Serial No. which is located on the body.
Thank you for purchasing this JVC product.
Retain this information for future reference.
Before operating this unit, please read the
Summary of the content on the page No. 2
Introduction FOR USA These aregeneral IMPORTANTSAFEGUARDS and certain items may not apply to all appliances. IMPORTANTSAFEGUARDS 1. Readall of theseinstructions. Save theseinstructions for lateruse. 2. 3. All warnings on the productand in the operating instructionsshouldbeadhered to. 4. Unplug thisappliancesystem from the wall outletbefore cleaning. Do notuse liquid cleaners oraerosol cleaners.Usea damp cloth for cleaning. Do notuseattachments not recommendedby theappliance manufactureras they m
Summary of the content on the page No. 3
POUR CANADA Safety Precautions ATTENTION RISQUE D’ELECTROCUTION NE PAS OUVRIR ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION NE PAS OUVRIR LE BOITER. FOR USA AND CANADA AUCUNE PIECE INTERIEURE N’EST A REGLER PAR L’UTILISATEUR. CAUTION SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME. RISK OF ELECTRIC SHOCK DO NOT OPEN Le symbole de l’éclair à l’intérieur d’un triangle équilatéral est destiné à alerter l’utilisateur sur la CAUTION:TO REDUCE THE RISK OF ELECTRIC présence d’une “tensio
Summary of the content on the page No. 4
Introduction Safety Precautions Information for Users on Disposal of Old Equipment [European Union] (continued) FOR EUROPE This equipment is in conformity with the provisions and protection requirements of the corresponding European Attention: Directives. This equipment is designed for professional video Thissymbol isonly valid in the European appliances and can be used in the following environments: Union. ● Controlled EMC environment (for example, purpose-built Thissymbol indicates that t
Summary of the content on the page No. 5
V
Summary of the content on the page No. 6
Introduction Contents Shooting Basic Shooting Procedures . . . . . . . . . . . . . . . . . . . . . . . .34 Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Focus Assist Function . . . . . . . . . . . . . . . . . . . . . . . . .35 Recording Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Selecting File and Video Formats . . . . . . . . . . . . . . . . . . .36 Introduction Adjusting the Iris . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 7
Menu Display and Detailed Settings Connecting External Devices Basic Operations in Menu Screen . . . . . . . . . . . . . . . . . . .66 Connecting an External Monitor . . . . . . . . . . . . . . . . . . .110 Display and Description of the Menu Screen . . . . . . . .66 IEEE1394 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .111 Text Input with Software Keyboard . . . . . . . . . . . . . . . .67 Backup Recording . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Menu Screen
Summary of the content on the page No. 8
Introduction Main Features New Viewfinder With a high resolution of 852x480 in 0.425 inches, the new viewfinder is now more robust and enables more accurate focusing. This camera recorder enables recording of HD format images on an SDHC card, and also playback of these High Resolution LCD Monitor images. Equipped with a 4.3 inch 800x480 large LCD monitor, both shooting precision and viewing performance are improved. Recording in QuickTime File Format Recording can be made in QuickTime file
Summary of the content on the page No. 9
Precautions for Proper Use Power Saving When this device is not in use, be sure to set the [POWER] switch to AOFFB in order to reduce power consumption. Batteries Storage and Usage Locations The following batteries can be used on this device. GY-HM700CHU/GY-HM700U Allowable ambient temperature and humidity : Dionic90 (Anton Bauer) Be sure to use this device within the allowable temperature range of GY-HM700CHE/GY-HM700E 0 I to 40 I and a relative humidity of 30 % to 80 %. Using this : E
Summary of the content on the page No. 10
Introduction Precautions for Proper Use LCD Monitor and Viewfinder The LCD monitor and viewfinder screens are (continued) manufactured using high-precision technology. Black spots may appear on the LCD monitor and viewfinder screens, or red, blue, and/or white spots may not turn off. However, this is not a malfunction and these spots are not recorded on the SDHC card. Handling of SDHC Cards If you use this device continuously for a long period of The access lamp lights up in red whe
Summary of the content on the page No. 11
Operation Mode This camera recorder has three operation modes - Camera mode, Media mode, and USB mode. The operation mode indicator on the left side of the camera recorder lights up according to the mode. Camera Mode Media Mode [CAM/MEDIA] Selection Button IEEE1394 Camera Mode Mode [CAM/MEDIA] Selection Button [CAM/MEDIA] SD Card Mode Selection Playback Button Playback Thumbnail Button (Playback/Pause/Fast Forward/ Display Rewind/Clip Jump) Stop Button [CAM/MEDIA] Button USB Connection (w
Summary of the content on the page No. 12
Introduction Names of Parts N ML K J Viewfinder (A Page 11) A B FGH I LCD Monitor (A Page 11) Zoom Lens (A Page 14) Side Control Panel (A Page 10) CDE A Front Tally Lamp (A Page30) (A Page87) J Monitor Speaker (Cheek Pad) (A Page 26) B Viewfinder Cable Clamp (A Page 20) K Shoe For mounting separately sold lights and accessories. C [ZEBRA ON/OFF] Zebra ON/OFF Switch (A Page 18) [SKIN AREA/SPOT METER] Skin Area/Spot Meter Switch L Microphone Holder Lock Knob (A Page 19) (A Page 75) M Microphone
Summary of the content on the page No. 13
W a ZY X W V O P Battery Mount (A Page 21) SDHC Slot (A Page 13) Q R S T U Side Terminal (A Page 12) O Back Tally Lamp (A Page30) (A Page87) X [FOCUS ASSIST] Focus Assist Button (A Page35) P [PHONES] Earphone Connector (3.5) (A Page 45) Y Record Button Lock Switch Q [LENS] Lens Connector (12-pin Connector) Set the switch toward the lens to lock the [REC] trigger (A Page 19) button Z. R [INPUT1/INPUT2] Audio Input Terminal 1, 2 (XLR 3- Memo :
Summary of the content on the page No. 14
Introduction Memo : Names of Parts (continued) ● Set the functions of the [USER1,USER2,USER3] buttons in the menu. (A Page 74) ● When the menu screen is displayed, these buttons function as the menu operation buttons. ( A Page 66 [Operation Buttons]) E [MENU] Menu Button (A Page 66) Side Control Panel F [ND FILTE
Summary of the content on the page No. 15
Memo : LCD Monitor ● When [Camera Function][Switch Set...]B[AE LEVEL] is set to AAE LEVEL/VFRB, the cross-shaped button is used to set the number of frames during Variable Frame REC. ( A Page 56 [Variable Frame REC]) ( A Page 75 [AE LEVEL]) During Media mode (SD Card mode) (A Page 57) Thumbnail operation : Cros
Summary of the content on the page No. 16
Introduction J Shoulder Pad Slide Button Names of Parts (continued) For adjusting the shoulder pad position. Press this button to adjust the shoulder pad K position to the front or back. K Shoulder Pad L [USB] USB Terminal (A Page 115) M [IEEE1394] IEEE1394 Terminal (4-pin) Side Terminal For connecting digital video equipment with IEEE1394 terminal using an IEEE1394 cable (sold separately). To enable this terminal, set the [INT/EXT] IEEE1394 terminal switch I to [EXT]. A ( A Page 112 [IEEE1
Summary of the content on the page No. 17
SD Slot Rear (A Page31) E D A A C A B B C A Card Slot A Status Indicator A Shoulder Belt Mount (x2) For mounting a shoulder belt (sold separately). B [SLOT SELECT] Card Slot Selection Button Note : For switching SDHC cards. ● Be sure to use a shoulder belt with the strength to withstand C SDHC Card Cover the weight of this camera recorder. ● If the shoulder belt is not properly attached, the camera D
Summary of the content on the page No. 18
IRIS A M T W RET REC Introduction G Zoom Servo Control Lever Names of Parts (continued) To operate zoom servo with the zoom servo control lever, set the [ZOOM] switch M to ASERVOB. ● Zooms into wide angle and increases the angle of view when AWB is pressed. ● Zooms into telephoto and decreases the angle of view when ATB is pressed. ● Zoom speed increases when the lever is pressed hard. Zoom Lens H Iris Mode Switch (Supplied with GY-HM700U/GY-HM700E only) A : Auto iris operation mode. CANON KT
Summary of the content on the page No. 19
Basic System Diagram Shoulder Belt SDI Cable BNC Component Cable BNC Microphone XLR 3P Monitor Composite Cable MV-P615 BNC Earphone Audio Cable Focus Manual Unit RCA pin HZ-FM13 (FUJINON) HZ-FM15 (CANON) Monitor External Recording Microphone IEEE1394 Cable Device 4P-6P 1/3 Zoom Lens Th13x3.5BRMU(FUJINON) For GY-HM700CHU/GY-HM700U VTR M Anton Bauer PL Mount 16 mm PL Mount Anton Bauer Battery Charger Film Lens Film Lens adapter Battery 1/3 Zoom Lens HZ-CA13U (Dionic90) BR-HD50U/E* KT14x4.4KRSJ
Summary of the content on the page No. 20
Introduction LCD monitor display Displays on the LCD The display switches between the 5 screen types with every press of the [STATUS] button. (STATUS 0B1B2B3B4B0) Monitor and Viewfinder Press the [DISPLAY] button to switch to the enlarged status display screen. (A Page 17) 30/24 fps You can display the camera status, media information, zebra pattern, and various markers in the video image on the LCD monitor and viewfinder screens during shooting. MAX 123% MIN 45% Besides camera and playb
