Summary of the content on the page No. 1
INSTALLATION & USER GUIDE
For Accurate Music and
Voice Reproduction from
In-Ceiling Locations
LSC-8
8" IN-CEILING LOUDSPEAKER
Summary of the content on the page No. 2
LSC-8 8" IN-CEILING LOUDSPEAKER TABLE OF CONTENTS Features ............................................................................................................................1 Product Overview ...........................................................................................................2 Package Contents ..........................................................................................................2 Preparing for Installation .....................................
Summary of the content on the page No. 3
FEATURES: LSC-8 ■ 8" Talc-filled polypropylene woofer with treated foam rubber surround ■ 3/4" pivoting liquid cooled polycarbonate dome tweeter ■ Moisture and UV resistant ■ Rust proof aluminum grilles Installation friendly design: ■ Suitable for painting ■ Connection terminals accept up to 12 gauge speaker wire ■ Quick mounting system for new construction or retrofit installations ■ Includes hole template and paint mask ■ Ceiling bracket for new construction: Jobsite NCB-8 (sold separately)
Summary of the content on the page No. 4
PRODUCT OVERVIEW The illustration shows how a Ceiling bracket serves as a “hole typical JobSite LSC-8 loudspeaker saver” when drywall has not been mounts into a ceiling. Knockout wire tie allows the wire to be applied. Cannot be used when secured to the bracket throughout the new installing into existing ceilings. construction process. It knocks out cleanly when the speaker is installed. Wings instantly snap into the bracket without screws. Dogs swivel 90°, then clamp the speaker fram
Summary of the content on the page No. 5
INSTALLATION 9. Strip 1/4" of insulation from the end of each wire coming from the amplifier. Installation Existing Construction: 10. Tightly twist the end of each wire until no frayed ends remain. 1. Use a stud locator to identify the location 11. Attach the speaker wires to the speaker of the ceiling joists on each side of the terminal connectors. Connect the proposed loudspeaker mounting location. negative output from the amplifier to the 2. Mark ceiling joists’ edges, using mas
Summary of the content on the page No. 6
4. There are four clamps “dogs” which speaker using a piece of tape. Fold the tape onto itself to form a double-sided loop. Affix hold each speaker in place. Rotate all the tape to the tweeter and place the mask the dogs inward. onto the speaker. 5. I nsert the loudspeaker into the cutout in Painting the Grilles: the ceiling. The LSC-8 grille should be painted before 6. The dogs are tightened via four they are installed on the speakers. The best front-baffle screws. Tighten the dogs
Summary of the content on the page No. 7
WARRANTIES OF MERCHANTABILITY OR FITNESS LIMITED WARRANTY FOR A PARTICULAR PURPOSE, WITH RESPECT TO JobSite Systems (“JOBSITE”), a Niles Audio THE PRODUCT. Corporation company, warrants its passive products REPAIR OR REPLACEMENT AS PROVIDED UNDER (those not requiring AC or battery power) to the original THIS WARRANTY IS THE EXCLUSIVE REMEDY OF purchaser to be free of manufacturing defects in THE CONSUMER/PURCHASER. JOBSITE SHALL material and workmanship for a period of ten years NOT BE
Summary of the content on the page No. 8
JOBSITE SYSTEMS 12331 S.W. 130 STREET, MIAMI, FLORIDA 33186 P 866.4JB.SITE (866.452.7483) – F 305.238.0185 WWW.JOBSITESYSTEMS.COM © 2005 JobSite Systems. All rights reserved. JobSite, Pure Custom and Niles are registered trademarks of Niles Audio Corporation and the JobSite Logo is a trademark of Niles Audio Corporation. All other trademarks are the property of their respective owners. Some JobSite products (or components thereof) are manufactured under one or more U.S. Patents, foreign equiva
