Summary of the content on the page No. 1
User manual
A50-71533-00001
EUROLIVE E1220A/E1520A
Summary of the content on the page No. 2
EUROLIVE E1220A/E1520A 1) Read these instructions. Important safety instructions 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. This symbol, wherever it appears, alerts you to the 7) Do not block any ventilation openings. Install in accor- presence of uninsulated dangerous voltage inside the dance with the manufacturer’s instructions. * enclosure - voltage that may be sufficient to constitute
Summary of the content on the page No. 3
E1220A/E1520A EUROLIVE E1220A/E1520A EUROLIVE Processor-Controlled 400-Watt 2-Way PA Loudspeaker/Floor Monitor = High-power 400-Watt 2-way PA sound reinforcement speaker/floor monitor for live and playback applications = Exceptional sound quality, wide frequency bandwidth and extensive dynamic range = Integrated sound processor for ultimate system control and speaker protection = Extremely powerful 12"/15" long-excursion driver provides incredibly deep bass and acoustic power = Proprietary 1''
Summary of the content on the page No. 4
EUROLIVE E1220A/E1520A Foreword Table of Contents Dear customer, 1. Introduction ......................................................................... 4 welcome to the community 1.1 Before you get started .................................................. 4 of EUROLIVE users, and 1.1.1 Shipment ............................................................. 4 thank you very much for expressing your confi- 1.1.2 Initial operation ................................................... 5 dence i
Summary of the content on the page No. 5
EUROLIVE E1220A/E1520A 1.1.2 Initial operation 2. Control elements and connections Be sure that there is enough space around the unit for cooling. To avoid overheating, do not place the E1220A/E1520A on top of power amps or near radiators, etc. + Blown fuses must be replaced by fuses of the same type and rating. Please refer to the “SPECIFICATIONS” for further details. The mains connection is made using the enclosed power cord and a standard IEC receptacle. It meets all international safety
Summary of the content on the page No. 6
EUROLIVE E1220A/E1520A 3. Application examples + Turn the LEVEL control fully to the left before you switch on the unit with the POWER switch. Then, raise the volume to a suitable level. 3.1 Using a mixing console A common way to use 2 E1220A/E1520A loudspeakers is with a mixing console. In this case, connect each of the main outputs that are on the mixing console to a E1220A/E1520A loudspeaker. The E1220A/E1520A includes XLR and 1/4" connectors. To avoid interference, use only XLR or 1/4"
Summary of the content on the page No. 7
EUROLIVE E1220A/E1520A 4. Installation 5. Specifications Both audio inputs of the BEHRINGER E1220A/E1520A and the Output power LINK OUTPUT connector are fully balanced. To maximize interfer- Low-frequency range ence compensation, try to establish balanced connections to other RMS @ 1% THD 200 W @ 8 Ω equipment, whenever possible. Peak power 320 W @ 8 Ω High-frequency range RMS @ 1% THD 50 W @ 8 Ω Peak power 80 W @ 8 Ω Input XLR connector (servo-balanced) Sensitivity -40 to +4 dBu Input i
Summary of the content on the page No. 8
EUROLIVE E1220A/E1520A 6. Warranty § 1 Other warranty rights and national law 2. If the product needs to be modified or adapted in order to com- ply with applicable technical or safety standards on a national 1. This warranty does not exclude or limit the buyer’s statutory or local level, in any country which is not the country for which rights provided by national law, in particular, any such rights the product was originally developed and manufactured, this against the seller that arise f
