Summary of the content on the page No. 1
Quick Installation Guide
TE100-MP1UN
V1
Summary of the content on the page No. 2
Table of Contents English 1 1. Before You Start 1 2. How to Install 2 3. Printing 7 4. Faxing 8 5. Scanner 9 Troubleshooting 10 Version 05.15.2010
Summary of the content on the page No. 3
1. Before You Start Package Contents ? TE100-MP1UN ? CD-ROM (Utility and User's Guide) ? Multi-Language Quick Installation Guide ? Power Adapter (12 V, 1A) System Requirements ? CD-ROM Drive Supported Operating Systems CPU Memory Windows 7 (32-bit) 1GHz or above 1GB RAM or above Windows Vista (32-bit) 800MHz or above 512MB RAM or above Windows XP (32-bit) / 2003 Server / 2000 300MHz or above 256MB RAM or above Note: 1. Do not perform the following unless instructed to do so: 1. Install the ut
Summary of the content on the page No. 4
2. How to Installation 1. Install the printer drivers to your computer. Then power down the printer and disconnect the printer from your computer. Note: Please refer to your printer's manual for printer installation instructions. 2. Insert the Utility CD-ROM into your CD-ROM drive. 3. Click Run Autorun.exe (Windows Vista only). 4. Click Install Utility. Then click Setup Wizard. 5. Connect the USB Printer to the USB port of the Print Server. Then click OK. 2
Summary of the content on the page No. 5
6. Connect a RJ-45 network cable from a Switch/Router to the LAN port on the Print Server. 7. Connect a RJ-45 network cable from a Switch/Router to the Ethernet port on your computer and then click OK. 8. Power ON your printer and then click OK. 9. Connect the AC Power Adapter to the Print Server and then to a power outlet. Then click OK. 10. Verify the Status LED is on and the Error LED is off on the Print Server. Then click Yes. 3
Summary of the content on the page No. 6
11. Select the print server and then click Next. 12. Configure the IP address of the print server to be in the same subnet as your network and then click Next. 13. Copy down the IP address and then click Next. 14. Click Finish. 15. Click Yes. 4
Summary of the content on the page No. 7
16. Click Next and then follow the InstallShield Wizard instructions. 17. Click Finish. 18. Click on Resource and then click Connect. 5
Summary of the content on the page No. 8
19. The printer driver wizard appears. Follow the printer driver wizard to install the printer. 20. Click OK. Print Server configuration is now complete. For detailed information regarding the TE100-MP1UN configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com. Register Your Product To ensure the highest level of customer service and support, please take a moment to register your p
Summary of the content on the page No. 9
3. Printing Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it. 1. Click on Resource and then click Connect. 2. Status will now show the client computer and IP address that is currently using the printer. 3. User can now start printing. 4. Click Disconnect. 7
Summary of the content on the page No. 10
4. Faxing Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it. 1. Click on Resource and then click Connect. 2. Status will now show the client computer and IP address that is currently using the printer. 3. User can now start Faxing. Follow the Multifunction printer software instructions for faxing. 4. Click Disconnect. 8
Summary of the content on the page No. 11
5. Scanner Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it. 1. Click on Resource and then click Connect. 2. Status will now show the client computer and IP address that is currently using the printer. 3. Place the document on the Multi-Function Printer's Scanner bed. Then follow the Multifunction printer software instructions for scanning. 4. Click Disconnect. 9
Summary of the content on the page No. 12
Troubleshooting 1. I inserted the Driver CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. What should I do? 1. For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen,, click the “Search programs and files” box, and type D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter assigned to your CD-ROM Driver, and then press the ENTER key on your keyboard
Summary of the content on the page No. 13
4. I am unable to print to my Print Server. What should I do? 1. Make sure you follow the exact steps for installing the Print Server in section 2. 2. Make sure to right click on the print server in the utility and click connect. If another user is using the print server, you must wait until the user is finished using it. 3. If you are connected to the print server and are idled for a couple of minutes, a warning message appears. If you do not respond within a minute, you will be automati
Summary of the content on the page No. 14
Summary of the content on the page No. 15
Copyright ©2010. All Rights Reserved. TRENDnet.
