Summary of the content on the page No. 1
Microsoft Small Business Server 2000
Installation Guide for HP NetServers E60,
E800, LC2000, and HP Server tc3100, and
tc4100
NOTICE: The information in this document was last updated for the HP NetServer Navigator CD-ROM version M.04.05.
If you don't have the M.04.05 version CD-ROM and you're obtaining this document from the HP web site as a reference
to install an operating system, be sure to also check the HP web site for the latest available drivers.
©Copyright Hewlett-Packard Compan
Summary of the content on the page No. 2
Tip #3. Upgrading Small Business Server 2000 from Uniprocessor HAL to Multiprocessor HAL Tip #4. Small Business Server 2000 Driver Signatures Tip #5. Upgrading D5013B NIC Drivers for Small Business Server 2000 Tip #6. Installation Fails to Boot after First Reboot Tip #7. Small Business Server 2000 Recovery Options Tip #8. Terminal Server Service is only support the NetServer L Series Frequently Asked Questions APPENDIX On-Line Information and Software Sources Introduction This documen
Summary of the content on the page No. 3
One or more hard drives. Latest system BIOS update. (http://www.hp.com) Two or more clients for testing purpose. (Optional) HP Driver's diskette if installing devices that have no drivers included in the Small Business Server 2000 CD-ROM. Example: HP NetRAID-4M, HP Fiber Channel adapter (Optional), etc. (This driver's diskette may contain updated Small Business Server 2000 drivers for HP components.) Process Flow ( High Level View ) 1. Locate and install optional components.
Summary of the content on the page No. 4
Computer Name: ______________________ Admin Password: _____________________ Date Time Zone: ______________________ Workgroup or Domain Name: ______________ Registration Key: ____________________________ Installation Methods There are several ways of installing Small Business Server 2000. The most popular methods are listed below. Select a method and go to the appropriate section of this guide to begin. Depending upon your system and its configuration, it may also be necessary to creat
Summary of the content on the page No. 5
Manual Installation Creating the Drivers Diskette Before you begin, use one of the following two methods that can be used to create the drivers diskette. One method is to create the drivers diskette using a system booted from the Navigator CD. The other method is to create the drivers diskette using a system that is running Windows NT, Small Business Server 2000, or Windows 95/98. Creating the Drivers Diskette at the server after booting from the Navigator CD 1. Boot the system from
Summary of the content on the page No. 6
If you want to start the setup by booting directly off the Small Business Server 2000 CD (supported for all NetServers), proceed to the following section "Installing Small Business Server 2000." Creating Setup Diskettes If you opt for starting the Small Business Server 2000 installation from Setup Diskettes, do the following: 1. You need four blank, formatted diskettes. Label them as listed below: Small Business Server 2000 Setup Boot. Small Business Server 2000 Setup Disk #2. Smal
Summary of the content on the page No. 7
NOTE: If the boot device driver is not included on the Small Business Server 2000 CD- ROM, for example the "HP NetRAID-4M", then do the following steps after pressing F6 a) Press S to select additional hardware. b) Select Other and press Enter. c) When prompted to insert driver diskette, please insert the target adapter driver's diskette created with the HP Navigator CD-ROM. Press Enter to continue. d) Select the target device driver from the list provided on the display. For example, if
Summary of the content on the page No. 8
15. Note: If you see a dialog box titled "Digital Signature Not Found". Please click "Yes" to continue the installation and read Tip #4 in the troubleshooting section of this guide. 16. Click Next at the regional Settings screen. 17. At the Personalize Your Software screen, enter a name and organization. Then click Next. 18. Enter the product license key. 19. At the Computer Name and Administrator Password type in your computer name, administrator password and password confirmation. Then
Summary of the content on the page No. 9
2. Click Properties. This brings up the "System Properties" panel. 3. Click the Hardware tab. 4. Click the Device Manager… button. 5. Verify that no devices have either a yellow band (!) or question mark (?) symbol next to it. (See following note for pointer to exceptions) Yellow (!) means that there is a resource issue with the device. Question (?) means that the device is unknown. 6. If no (!) or (?) symbols are reported then you are done. Go to step 9. Otherwise, do the next step. 7.
Summary of the content on the page No. 10
1. Click Start | Programs | Administrative Tools | Computer Management. 2. If necessary click the + sign next to Storage to open this folder. 3. Double click Disk Management. 4. The "Write signature and Upgrade" wizard will start if you have new hard drives with no signatures on them. 5. Follow the instructions provided by the wizard to create the new hard drive signature. 6. Perform formatting and partitioning. NOTE: There are two types of hard drive configuration: Dynamic and Basic. Y
Summary of the content on the page No. 11
10. Open a command prompt window to verify the TCP/IP configuration. Enter the command: ipconfig /all You should get a display showing the configuration information you entered above. 11. Test the link by entering the following at the command prompt: ping computername Where computername is the server name. You should get four reply's from 100.100.100.1, if you don't get this result then there is a link problem which must be fixed before going any further. 12. Test the link by d
Summary of the content on the page No. 12
7. Click Next. The system will take a few minutes with the hour clock on the display before moving to next screen. 8. Click Next at the "NetBIOS Domain Name" dialog box to accept default "Domain NetBIOS name:" 9. Click Next to accept "Database and Log Locations" default values: Database Location: C:\WINNT\NTDS Log Location: C:\WINNT\NTDS 10. Click Next to accept default "Shared System Volume". Folder Location: C:\WINNT\SYSVOL 11. The system will display a dialog box that reads "The
Summary of the content on the page No. 13
Tip #1. Upgrading from SBS 4.0 to Small Business Server 2000 It is possible to upgrade from any edition of NT 4.0 including Terminal Server to Small Business Server 2000. Please refer to the readme.doc on the Small Business Server 2000 CD and the Small Business Server 2000 Setup Guide for information on how to perform the upgrades. Tip #2. Using the Small Business Server 2000 integrated backup utility with the HP NetServer E 60 bundled tape drive The backup utility in w2k has a "Backup De
Summary of the content on the page No. 14
5. Click "Display a list of known drivers for this device", and then click "Show all hardware of this device class". 6. Click the appropriate computer type (one that matches your current type, except for multiple CPUs), click Next, and then click Finish. Tip #4. Small Business Server 2000 Driver Signatures Small Business Server 2000 checks for digital signatures on driver files to help maintain system integrity. During the installation or update of a driver, if there is no matching signat
Summary of the content on the page No. 15
5. At the prompt "What do you want the wizard to do?", select the "Search for a suitable driver for my device" radio button, and click Next. 6. Select the appropriate media checkbox and click next. 7. Select the "Install one of the other drivers" check box and click Next. 8. Select the driver on the floppy drive A: and click Next. 9. Restart your computer. (This is not required if you only have one NIC on your system. Otherwise, it is recommended to reboot to make sure other D5013 adapters
Summary of the content on the page No. 16
2. Networking disabled. Includes networks services and drivers. 3. Directory services restore mode. Brings system up with directory services disabled with the intent of recovering active directory. Safe mode boot is guided by the registry key hklm\CurrentControlSet\Control\SafeBoot with the use of the Minimal and Network subkeys. The IOManger and service control manager looks at the resgistry to load the driver and services. This way it will avoid loading a problematic driver or service. 4
Summary of the content on the page No. 17
8. Type exit when done troubleshooting. Installing RC 1. Insert Small Business Server 2000 CD-ROM. If CD-ROM auto-start is enabled, click exit to close the applet. 2. Open a command prompt and type D:\I386\WINNT32 /CMDCONS and press Enter. (Where D: is the CD-ROM drive letter.) 3. Follow the screen instructions to complete the RC installation. Booting RC 1. Shutdown and Restart system. 2. Select "Small Business Server 2000, Recover Console" from the boot menu. 3. The system will displa
Summary of the content on the page No. 18
Answer: Table 6, provided in the appendix of this document provides a list of Disk Array BIOS/Firmware versions used to test with Small Business Server 2000. HP recommends that you use the version indicated in this table or a later release. Question: Where do I get the driver's required to run Small Business Server 2000? Answer: The initial release of Small Business Server 2000 includes all the drivers required to install Small Business Server 2000 on the NetServer's and DAC's listed in ta
Summary of the content on the page No. 19
E60 Yes Yes Yes E800 Yes Yes Yes LC2000 Yes Yes Yes tc3100 Yes Yes Yes tc4100 Yes Yes Yes Table #2 List of embedded SCSI chip set for each NetServer. (Note: See "Table #6" for a list of tested and supported system under Small Business Server 2000) Model SCSI Adapter Ultra SCSI/ Channel A,B E60 Adaptec 7895 (Wide)/A,B E800 Symbios 896 Ultra2/ A,B LC2000 Symbios 897 Ultra2/A,B tc3100 LSI53C1010 Ultra3/ A,B tc4100 LSI53C1010 Ultra3/ A,B Table #3 List of embedded Video Produc
Summary of the content on the page No. 20
* The driver is not provided by Hewlett-Packard. Users should use the driver bundled with Windows NT CD-ROM. Note: Video adapters with 1M can be upgraded to 2M. Table #4 This table provides a list of CD-ROM type for each NetServer. ( Note: See "Table #6" for a list of tested and supported system under Small Business Server 2000) Model CD-ROM Type E60 IDE E800 IDE LC2000 IDE tc3100 IDE tc4100 IDE Table #5 This table provides a list of NetServers tested with Small Business Server 2
