Summary of the content on the page No. 1
CHAPTER 4
Installing Cisco Unified MeetingPlace Express
Release 1.1.2
Follow all of the steps in these sections, in the order listed, to correctly install
Cisco Unified MeetingPlace Express Release 1.1.2. Topics in this section include:
• Before You Start the Installation, page 4-1
� Preinstallation Work, page 4-3
� How to Install Cisco Unified MeetingPlace Express, page 4-8
Before You Start the Installation
On certain servers for certain releases you must do some preparatory work before you c
Summary of the content on the page No. 2
Chapter 4 Installing Cisco Unified MeetingPlace Express Release 1.1.2 Before You Start the Installation Table 4-1 Preinstallation Work Required for Cisco MCS 7825 Series Server RAID enabled? 1 Cisco MCS 7825H-3.0-IPC1 N/A Cisco MCS 7825-H1-RC1 Yes See the “Enabling RAID on a Cisco MCS 7825-H1-RC1 and Cisco MCS 7825-H2-RC1” section on page 4-3. Cisco MCS 7825-H2-RC1 Yes See the “Enabling RAID on a Cisco MCS 7825-H1-RC1 and Cisco MCS 7825-H2-RC1” section on page 4-3. 1 Cisco MCS 7825I-3.0
Summary of the content on the page No. 3
Chapter 4 Installing Cisco Unified MeetingPlace Express Release 1.1.2 Preinstallation Work Cisco MCS 7845 Series Servers See Table 4-3 for the preinstallation work required for the Cisco MCS 7845 series servers. Note All Cisco MCS 7845 series servers support RAID. Table 4-3 Preinstallation Work Required for Cisco MCS 7845 Series Prep disk Server needed? For more information, see Cisco MCS 7845H-3.0-IPC1 Yes See the “Configuring RAID on a Cisco MCS 7835 Series, a Cisco MCS 7845-I1-RC1, o
Summary of the content on the page No. 4
Chapter 4 Installing Cisco Unified MeetingPlace Express Release 1.1.2 Preinstallation Work Step 5 Highlight Enabled by using the up and down arrow keys. Press Enter to select it. Step 6 Exit the Advanced Options menu by pressing Escape. Step 7 Exit the ROM-Based Setup Utility by pressing Escape. Step 8 Press F10 to confirm that you want to exit. The system automatically reboots. Step 9 When prompted, press the following to go to the Adaptec RAID Configuration Utility: � For the Cisco MCS
Summary of the content on the page No. 5
Chapter 4 Installing Cisco Unified MeetingPlace Express Release 1.1.2 Preinstallation Work Step 5 Highlight Save Settings by using the up and down arrow keys. Press Enter to select it. Step 6 If the system displays a message, press Enter to continue. Step 7 Highlight Exit Setup by using the up and down arrow keys. Press Enter to select it. Step 8 Select Yes, exit the Setup Utility and press Enter. The system automatically reboots. Step 9 When prompted, press Ctrl-A to go to the Adaptec RA
Summary of the content on the page No. 6
Chapter 4 Installing Cisco Unified MeetingPlace Express Release 1.1.2 Preinstallation Work Step 6 When the value is Enhanced, the system displays a sub menu with two options. Highlight SATA RAID Enable by using the up and down arrow keys. Step 7 Use the left and right arrow keys to change its value to Enabled. Step 8 Press Escape to exit the Advanced Chipset Control. Step 9 Press Escape to exit Devices and I/O Ports. Step 10 From the main menu, highlight Save Settings by using the up and
Summary of the content on the page No. 7
Chapter 4 Installing Cisco Unified MeetingPlace Express Release 1.1.2 Preinstallation Work The Cisco Unified MeetingPlace Express system comes with a preparation disk that you must use before you can install the operating system and application on certain Cisco MCS models (or a Cisco-approved, customer-provided, exact equivalent server from another vendor). The preparation disk automatically determines the model of your server, so the same disk can be used for several server models. Pr
Summary of the content on the page No. 8
Chapter 4 Installing Cisco Unified MeetingPlace Express Release 1.1.2 How to Install Cisco Unified MeetingPlace Express How to Install Cisco Unified MeetingPlace Express Follow the steps in these sections to install Cisco Unified MeetingPlace Express. Topics in this section include: � Installing the Cisco Unified MeetingPlace Express Operating System, page 4-8 � Configuring the Cisco Unified MeetingPlace Express Server, page 4-8 � Installing the Cisco Unified MeetingPlace Express Applica
Summary of the content on the page No. 9
Chapter 4 Installing Cisco Unified MeetingPlace Express Release 1.1.2 How to Install Cisco Unified MeetingPlace Express Procedure Step 1 The Cisco Unified MeetingPlace Express system displays the Welcome page with an introductory message informing you that there are a few more steps to take before your system is ready to use. Click Next. Step 2 The Network Setup page appears. Enter values in the following fields. All fields are required except for the Secondary DNS Information field: �
Summary of the content on the page No. 10
Chapter 4 Installing Cisco Unified MeetingPlace Express Release 1.1.2 How to Install Cisco Unified MeetingPlace Express d. Click Next. Installing the Cisco Unified MeetingPlace Express Application Follow these steps to install the Cisco Unified MeetingPlace Express application. Procedure Step 1 The system displays the Cisco Application DVD page. Close the DVD-ROM drive that has the Cisco Unified MeetingPlace Express DVD in it. Step 2 Click Install.... Step 3 Wait a few minutes while the
Summary of the content on the page No. 11
Chapter 4 Installing Cisco Unified MeetingPlace Express Release 1.1.2 How to Install Cisco Unified MeetingPlace Express Step 9 The Review New Network Settings page appears and displays all the network values you entered in Step 2 of the “Configuring the Cisco Unified MeetingPlace Express Server” section on page 4-8. Review these values to ensure they are correct. If they are correct, click Next. � If they are not correct, click Previous to go back to the previous pages and make changes.
Summary of the content on the page No. 12
Chapter 4 Installing Cisco Unified MeetingPlace Express Release 1.1.2 How to Install Cisco Unified MeetingPlace Express Note Wait until the DVD-ROM drive ejects the DVD before removing it. Step 16 Remove the Cisco Unified MeetingPlace Express DVD from the DVD-ROM drive. If you did not make any changes to the network settings in Step 6, Step 7, or Step 8, the Cisco Application DVD page appears. Note If you made changes to the network settings then your machine automatically restarts. Whe
