Speco Technologies Intense-IR Camera CVC5715DNVW user manual

Summary of the content on the page No. 1

INSTRUCTION
MANUAL
Intense-IR Camera
CVC5715DNV
CVC5715DNVW

Summary of the content on the page No. 2

◑ Contents ...................................................... 1 ◑ Precautions ................................................. 2, 3 ◑ Safety Instructions ...................................... 4 ◑ Package Contents ....................................... 5 ◑ Camera Installation ..................................... 6-8 ◑ .............................................. 9 ◑ Camera Dimension ..................................... 10 ◑ OSD Menu Details .................................

Summary of the content on the page No. 3

Only use the camera under conditions Severe lighting change or flicker can This is one of the most important parts of the where temperatures are between cause the camera to work improperly. camera. Be careful not to leave -10°C and +50°C. Be especially careful to provide fingerprints on the lens cover. ventilation when operating under high temperatures. It can cause malfunctions to occur. Severe lighting change or flicker can If exposed to radioactivity the CCD cause the camera to work imprope

Summary of the content on the page No. 4

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT REMOVE COVER(OR BACK). CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK NO USER-SERVICEABLE PARTS INSIDE. CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Summary of the content on the page No. 5

◑ ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ rical shock ◑ Please insure that your installation area can support the weight of the camera ◑ Do not use a strong or abrasive detergent when cleaning the camera ◑ Do not install near cooling or heating device 4

Summary of the content on the page No. 6

Package Contents Please make sure that the following items are included in the Package: 1) CVC5715DNV, CVC5715DNVW • 1 Video Test Connector, Power Jack • 1 2Axis Bracket Adaptor • 2 Wrenches • Set Screw - 4 Tapping Screws 4x20 - 4 Hexagon Socket Screws M4x7

Summary of the content on the page No. 7

Summary of the content on the page No. 8

CAMERA INSTALLATION Compatibility 1) CVC5715DNV, CVC5715DNVW INTCM

Summary of the content on the page No. 9

CAMERA INSTALLATION 1. CVC5715DNV, CVC5715DNVW WALL CAMERA ASSEMBLY 2AXIS BRACKET ADAPTOR TAPPING SCREW 4X20, 4EA HEXAGON SOCKET SCREW M4X7, 4EA 8

Summary of the content on the page No. 10

Intense - IR Bullet Camera DC Auto Iris Varifocal Lens(4mm-9mm) / IR LED Built-in 14pcs C V C 5 7 1 5 D N V ■ ■ C V C 5 7 1 5 D N V W 600TV Lines DC Auto Iris Varifocal Lens (4mm-9mm) True Day/Night Capability ICR-IR Cut Filter Removable 850nm IR LEDs * 14pcs IR LED's 14EA & Heater's 2EA SPECIFICATIONS MODEL CVC5715DNV / CVC5715DNVW 1/3" SONY Super HAD ll CCD Sensor NTSC=811(H) * 508(V) / PAL=795(H) * 595(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Effective Pixels 2:1 Interlac

Summary of the content on the page No. 11

CAMERA INSTALLATION 1) CVC5715DNV, CVC5715DNVW 7.63” 2.87” 4.64” 7.48” 10 2.71” 2.59” 2.71” dia

Summary of the content on the page No. 12

OSD Contr ol Button 1. Type A, Type B, Type C of OSD button could be used when it needs to OSD control. 2. Type D is extra Option (wired Remote controller) 11

Summary of the content on the page No. 13

How to S et U p the camer a menu ● S etup Menu 12

Summary of the content on the page No. 14

13

Summary of the content on the page No. 15

14

Summary of the content on the page No. 16

Menu Set Up Menu items can be selected by using the OSD buttons of the camera 1. Press the Set Up button. * The Set Up menu will be displayed on the monitor. SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.DAY / NIGHT COLOR 5.3DNR ON 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT 2. Move and select the required function using the Up and Down button. * Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button. SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.DAY / NIGHT

Summary of the content on the page No. 17

3. Change menu settings using the Left or Right button. * Available values or Status are displayed by pressing the Left or Right buttons. Press the button until desired value / status is displayed. 4. After Changing the setting move the arrow indicator to EXIT and press the SET button to EXIT. NOTE * Move to the available submenu by moving arrow to desired feature. * Submenu is not available when this symbol is display "- - - -" Lens 1. Move the arrow indicator to LENS using the

Summary of the content on the page No. 18

NOTE * When DC is selected, the brightness can be adjusted. The brightness control range is 1 ~ 100. Lens BRIGHTNESS 100 RETURN 3. Press the RETURN to return to the SETUP menu. Exposure This function is used to select Automatic or Manual shutter speed control. 1. On the Set Up menu screen select EXPOSURE by using the Up or Down button. 2. Select the desired shutter mode by pressing the Left or Right button. SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.DAY / NIGHT COLOR 5.3DNR ON 6.SPECIAL 7.ADJU

Summary of the content on the page No. 19

EXPOSURE SHUTTER AUTO AGC MIDDLE SENS-UP AUTO BLC OFF D-WDR OFF RETURN RET NOTE *Shutter: Select Shutter using the Up or Down button, you can adjust the shutter speed from 1/60, FLK, 1/250~1/100,000. →FLK: Select FLK mode if flickering occurs; caused by the unmatched frequency of electric light. If select FLK mode, sense-up does not operate. * AGC(AUTO GAIN CONTROL): A higher gain increases brightness but also increases any noise. OFF : Deactivates the AGC function LOW : Sets automatic gain c

Summary of the content on the page No. 20

* RETURN: Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu. NOTE * Pressing the SET button in AUTO mode allows adjustment of image brightness by increasing or decreasing the shutter speed (x2 ~x256). * The higher the level, the brighter the image becomes, but it is possible that an after image (ghosting) could appear. * When SENS-UP is activated the increased magnification can induce noise and pixelation; this is quite normal. Back Light(BLC) This ca