Summary of the content on the page No. 14
Display Setup Display setup allows you to program how labels are displayed on the monitor. The following labels PELCO EXSITE IPSXM are available: LANGUAGE ENGLISH UNIT INVERSION OFF PRESET LABEL Identifies preset. ZONE LABEL Identifies zone. ZOOM Identifies the amount of magnification. RESET CAMERA CYCLE CAMERA POWER AZIMUTH*/ Amount of pan from 0° and the amount of tilt from 0° horizontal. REBOOT SYSTEM ELEVATION**
Summary of the content on the page No. 15
LABEL POSITIONS Labels can be placed anywhere on the monitor. This feature allows you to customize the appearance PELCO EXSITE IPSXM of your monitor screen. LANGUAGE ENGLISH UNIT INVERSION OFF The following labels are not set at fixed positions: Preset Label Zone Label Alarm 1 RESET CAMERA Azimuth*/Elevation**: XXX°/-XX° CYCLE CAMERA POWER Zoom Ratio: XXX.XX REBOOT SYSTEM Direction: Compass direction is shown
Summary of the content on the page No. 16
Unit Settings CAMERA TYPE OF LIGHTING PELCO EXSITE IPSXM LANGUAGE ENGLISH UNIT INVERSION OFF Pelco has calibrated settings that optimize the white balance, and the picture, for indoor and outdoor lighting conditions. There are two settings: OUTDOOR (default) INDOOR RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM AUTO FOCUS EXIT Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and m
Summary of the content on the page No. 17
IR CUT FILTER (23X DAY/NIGHT CAMERA) PELCO EXSITE IPSXM LANGUAGE ENGLISH ExSite IPSXM has two modes of operation: color and black-white. You can increase sensitivity in UNIT INVERSION OFF low light conditions by switching to black-white mode (removing the IR cut filter). Color mode is preferred in normal lighting conditions. The following are the settings for the IR cut filter: RESET CAMERA CYCLE CAMER
Summary of the content on the page No. 18
ADVANCED CAMERA SETTINGS SHUTTER SPEED PELCO EXSITE IPSXM LANGUAGE ENGLISH UNIT INVERSION OFF Shutter speed is the duration of the electronic shutter. Program shutter speed to operate automatically (Auto) or manually (Numeric Value). AUTO (default) The electronic shutter speed is set automatically by the amount of light sensed by the camera. RESET CAMERA CYCLE CAMERA POWER NUMERIC VALUE The system has sever
Summary of the content on the page No. 19
AUTO IRIS PELCO EXSITE IPSXM LANGUAGE ENGLISH Auto iris is the lens function that automatically opens and closes the iris in response to changing UNIT INVERSION OFF light conditions. Program the auto iris to operate automatically or at a user-defined level. OFF Auto iris is disabled, and control is always manual. RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM AUTO (default) The iris is adjusted automatica
Summary of the content on the page No. 20
BACKLIGHT COMPENSATION (BLC) PELCO EXSITE IPSXM LANGUAGE ENGLISH If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. UNIT INVERSION OFF Backlight compensation enhances objects in the center of the picture. The system uses the center of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out to white. The camera will adjust the iris
Summary of the content on the page No. 1
OPERATION/PROGRAMMING
™
ExSite Series
Explosionproof
Positioning System
C1300M-B (6/05)
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Enable Motion Detection (23X Day/Night Camera) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Edit Detection Areas (23X Day/Night Camera) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 5
Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
Summary of the content on the page No. 6
Welcome Thank you for purchasing Pelco’s ExSite™ IPSXM Series explosionproof positioning system. Your new system features a high resolution, camera/optics package with programmable software. This manual is designed to be a reference tool for the operation and programming of your system. Inside you will find information about the features and commands of your IPSXM system, as well as a detailed menu tree. MODELS IPSXM30C22-2 Pan and tilt system with color camera, 60 Hz, 24 VAC IPSXM3
Summary of the content on the page No. 7
How to Operate Your System Operation How to Control Pan and Tilt Move joystick or press the direction keys left/right and up/down. Zoom Far To zoom far, do the following: 1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit. 2. Release the button or joystick for one second. 3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the picture you want or reach the digital
Summary of the content on the page No. 8
ACCESSING MAIN MENU (PRESET 95) You can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode). Programming preset 95 for Pelco’s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for various Pelco controllers. CM6700/CM6800 1. Enter the number of the IPSXM system and press the CAM key. 2. Enter 95 and hold the PRESET key for two second
Summary of the content on the page No. 9
Quick Start Guide – System Setup PELCO EXSITE IPSXM Quick Programming Guide LANGUAGE UNIT INVERSION Access the main menu (preset 95). See the Accessing Main Menu (Preset 95) section. Use the joystick to position the cursor beside Presets menu selection. If your controller does not have a RESET CAMERA The following presets are reserved for special functions. CYCLE CAMERA POWER joystick, use the up or down key. REBOOT
Summary of the content on the page No. 10
10 C1300M-B (6/05)
Summary of the content on the page No. 11
Language The language for the on-screen menus is selectable. Available languages include English, Spanish, PELCO EXSITE IPSXM French, German, Italian, Portuguese, Polish, Russian, Turkish, and Czechoslovakian. The factory LANGUAGE ENGLISH default language is English. UNIT INVERSION OFF To change the display language: 1. Use the joystick to position the cursor beside LANGUAGE. 2. Press Iris Open. The cursor move
