Summary of the content on the page No. 1
AutoDome 800 Series HD PTZ Camera
VG5 800 Series
en Installation Manual
Summary of the content on the page No. 2
Summary of the content on the page No. 3
AutoDome 800 Series HD PTZ Camera Table of Contents | en 3 Table of Contents 1Safety 7 1.1 Important Safety Instructions 7 1.2 Safety Precautions 9 1.3 Important Notices 9 1.4 Customer Support and Service 13 2 Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts 14 2.1 Unpacking 14 2.1.1 Parts List 14 2.1.2 Description 15 2.1.3 Tools Required 15 2.2 Pre-installation Checklist 15 2.3 Mount Power Supply Box 16 2.4 Route Wires and Attach Connectors 17 2.4.1 Power Supply Box Connections 1
Summary of the content on the page No. 4
4 en | Table of Contents AutoDome 800 Series HD PTZ Camera 5 Alarms and Relay Connections 54 5.1 Alarm Inputs 54 5.2 Connecting Alarms (inputs 1 or 2) 54 5.2.1 Connecting a Normally Open Alarm 54 5.2.2 Connecting a Normally Closed Alarm 54 5.3 Configuring an Open Collector Output 55 6 Using the AutoDome 800 Series 56 6.1 Overview of Features 56 6.2 System Requirements 56 6.3 Connecting the AutoDome 800 Series to the PC 57 6.4 Configuring the AutoDome 800 Series Camera 58 6.4.1 Changing the Netwo
Summary of the content on the page No. 5
AutoDome 800 Series HD PTZ Camera Table of Contents | en 5 7.23 Lens Settings 86 7.24 PTZ Settings 87 7.25 Diagnostics 88 7.26 Preposition and Tours 89 7.27 Sectors 89 7.28 Miscellaneous 90 7.29 Logs 90 7.30 Audio 90 7.31 Pixel Counter 90 7.32 Advanced Mode: Recording 91 7.33 Storage Management 91 7.34 Recording Profiles 92 7.35 Retention Time 94 7.36 Recording Schedule 94 7.37 Recording Status 95 7.38 Advanced Mode: Alarm 95 7.39 Alarm Connections 95 7.40 VCA 97 7.41 Audio Alarm 101 7.42 Alarm
Summary of the content on the page No. 6
6 en | Table of Contents AutoDome 800 Series HD PTZ Camera A Keyboard Commands by Number 116 Index 117 F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Summary of the content on the page No. 7
AutoDome 800 Series HD PTZ Camera Safety | en 7 1Safety 1.1 Important Safety Instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist fluff-free cloth or leather shammy may also be u
Summary of the content on the page No. 8
8 en | Safety AutoDome 800 Series HD PTZ Camera 11. Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable to be installed into the unit. – For battery powered units, refer to the operating instructions. – For external power supplied units, use only the recommended or approved power supplies. – For limited power source units, this power source must comply with EN60950. Substitutions may dam
Summary of the content on the page No. 9
AutoDome 800 Series HD PTZ Camera Safety | en 9 1.2 Safety Precautions DANGER! This symbol indicates an imminently hazardous situation such as “Dangerous Voltage” inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. WARNING! Indicates a potentially hazardous situation. If not avoided, this could result in serious bodily injury or death. CAUTION! Indicates a potentially hazardous situation. If not avoided, this may result in minor or
Summary of the content on the page No. 10
10 en | Safety AutoDome 800 Series HD PTZ Camera – Disconnect the unit's input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal. – Follow proper safety precautions such as grounding for any outdoor device connected to this unit. U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of
Summary of the content on the page No. 11
AutoDome 800 Series HD PTZ Camera Safety | en 11 Power lines - Do not locate the camera near overhead power lines, power circuits, or electrical lights, nor where it may contact such power lines, circuits, or lights. SELV All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits should only be connected to other SELV circuits. Because the ISDN circuits are treated like telephone-network voltage, avoid connecting the SELV circuit to the Telephone Network Voltage (T
Summary of the content on the page No. 12
12 en | Safety AutoDome 800 Series HD PTZ Camera destinées à fournir une protection raisonnable contre les interférences nuisibles quand l'appareil est utilisé dans une installation commerciale. Cette appareil génère, utilise et émet de l'energie de fréquence radio, et peut, en cas d'installation ou d'utilisation non conforme aux instructions, générer des interférences nuisibles aux communications radio. L’utilisation de ce produit dans une zone résidentielle peut provoquer des interférences
Summary of the content on the page No. 13
AutoDome 800 Series HD PTZ Camera Safety | en 13 1.4 Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers USA Telephone: 800-366-2283 or 585-340-4162 Fax: 800-366-1329 Email: cctv.repair@us.bosch.com Customer Service Telephone: 888-289-0096 Fax: 585-223-9180 Email: security.sales@us.bosch.com Technical Support Telephone: 800-326-1450 Fax: 585-223-3508 or 717-735-6
Summary of the content on the page No. 14
14 en | Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts AutoDome 800 Series HD PTZ Camera 2 Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts 2.1 Unpacking This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representat
Summary of the content on the page No. 15
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts | en 15 2.1.2 Description This chapter details how to install an AutoDome Pendant Arm to a wall, a corner, or to a mast (pole). Any variations to the installation procedures are noted. See Section 3 Installing Roof Parapet and Pipe Mounts, page 33 for a Roof (Parapet) or Pipe mount installation. 2.1.3 Tools Required – 5 mm Allen wrench (supplied) – Small, straight-blade screwdriver - 2.5 mm (0.1
Summary of the content on the page No. 16
16 en | Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts AutoDome 800 Series HD PTZ Camera CAUTION! Select a rigid mounting location to prevent excessive vibration to the AutoDome camera. 2.3 Mount Power Supply Box Before mounting the Power Supply Box decide if you should wire the box through the holes in the bottom or back of the box. If wiring the box through the back, move the two (2) seal plugs to the bottom through the holes before mounting. NOTICE! Use 3/4-inch (20-mm) NP
Summary of the content on the page No. 17
J101 AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts | en 17 6. Attach 3/4-inch (20-mm) NPS watertight pipe fittings (not supplied) to the bottom or back holes of the Power Supply Box through which you will run the power, video, and control data wires. 2.4 Route Wires and Attach Connectors Power wires must be routed to the left (front) side of the power supply box through a separate conduit. All video, control, and alarm wires must be routed
Summary of the content on the page No. 18
18 en | Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts AutoDome 800 Series HD PTZ Camera 4. Attach the supplied 3-pin Power Plug to the incoming power wires. See connector P101 in Table 2.1, Page 20, for wire connections. 5. Attach an RJ45 plug to the incoming Ethernet cable. If installing a Fiber Optic model, attach an ST fiber plug to the optic fiber cable. See Section 4 Cable and Wire Standards, page 51, for the different methods of transmitting video and control protocols
Summary of the content on the page No. 19
J101 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts | en 19 2.4.1 Power Supply Box Connections The following figure is a detailed illustration of the Pendant Arm Power Supply Box, which includes the fuse specifications. TRANSFORMER (115/230VAC MODELS) J102 P101 (LED) 24V NC 24V 1 2 3 P106 P105 GND TXD RXD C+ C- GND TXD RXD C+
Summary of the content on the page No. 20
J101 20 en | Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts AutoDome 800 Series HD PTZ Camera No. Connector Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Ground Grounding Screw P101 115/230 VAC or Line NC Neutral 24 VAC Power In P105 Data/Audio Audio Audio Earth Not Used Ground P106 Not Used P107 24 VAC Power Dome Dome Earth Heater Heater (Arm Harness) 24 VAC 24 VAC Ground (24 VAC) (24 VAC) Table 2.1 Power Supply Box Connections 2.5 Route Power through Intermediate Power Supply Box You ma
