Summary of the content on the page No. 8
8 en | Safety FLEXIDOME HD VR 1.3 Connection in applications Grounding The yellow/green safety (power) ground wire from the camera must be connected to the system earth of the installation. U.S.A.: - section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding. 12 VDC / 24 VAC power source: This unit is intended to operate with a limited power source. The unit is intended to operate at either 12 VDC or 24 VAC (if PoE is not available). User s
Summary of the content on the page No. 9
FLEXIDOME HD VR Safety | en 9 1.5 FCC & ICES compliance FCC & ICES Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful int
Summary of the content on the page No. 10
10 en | Safety FLEXIDOME HD VR 1.6 MicroSD cards Bosch Security systems recommends that local storage on microSD card should only be used for alarm recording and Automatic Network Replenishment (ANR) applications. To minimize the risk of loss of digital information, we recommend multiple, redundant recording systems, and a procedure to back up all digital information. 1.7 UL certification Disclaimer Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the s
Summary of the content on the page No. 11
FLEXIDOME HD VR Safety | en 11 1.8 Bosch notices Video loss Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information. Optical elements Optical elements are sensitive and should be protected at all ti
Summary of the content on the page No. 12
12 en | Safety FLEXIDOME HD VR 1.9 Copyrights The firmware uses the fonts "Adobe-Helvetica-Bold-R-Normal-- 24-240-75-75-P-138-ISO10646-1" and "Adobe-Helvetica-Bold-R- Normal--12-120-75-75-P-70-ISO10646-1" under the following copyright: Copyright 1984-1989, 1994 Adobe Systems Incorporated. Copyright 1988, 1994 Digital Equipment Corporation. Permission to use, copy, modify, distribute and sell this software and its documentation for any purpose and without fee is hereby granted, provided that t
Summary of the content on the page No. 13
FLEXIDOME HD VR Introduction | en 13 2 Introduction 2.1 Features The FLEXIDOME HD Vandal-Resistant (VR) IP Day/Night camera is a high-performance, surveillance color camera. The analog video output of the camera can be used simultaneously with an IP stream to allow operation in hybrid mode. The IP video stream uses H.264 compression technology to give clear images while reducing bandwidth and storage requirements. It is also ONVIF compliant to improve compatibility during system integrati
Summary of the content on the page No. 14
14 en | System Information FLEXIDOME HD VR 3 System Information 3.1 Network video server The camera incorporates a network video server. Its primary function is to encode video and control data for transmission over an IP network. With its H.264 encoding, it is ideally suited for IP communication and for remote access to digital video recorders and IP systems. The use of existing networks means that integration with CCTV systems or local networks can be achieved quickly and easily. Video i
Summary of the content on the page No. 15
FLEXIDOME HD VR System Information | en 15 3.1.5 Audio Two-way duplex audio is available in the unit for live voice communications or audio recording. 3.1.6 Alarm I/O The alarm input can be used to control the functionality of the unit. An alarm output can control external devices. 3.1.7 Tamper detection and motion detection The camera offers a wide range of configuration options for alarm signaling in the event of tampering with the camera. A Motion+ algorithm for detecting movement in the
Summary of the content on the page No. 16
16 en | System Information FLEXIDOME HD VR 3.1.12 Recording The camera can be used with an iSCSI server connected via the network to store long-term recordings, and with a local microSD card for shorter storage times and temporary recordings. 3.1.13 Configuration The camera can be configured using a browser on the local network (Intranet) or from the Internet. Similarly, firmware updates and rapid loading of device configurations are also possible. Configuration settings can be stored as
Summary of the content on the page No. 17
FLEXIDOME HD VR System Information | en 17 3.2 Operation with external systems The camera can be used with a variety of Bosch systems: – Bosch Video Management System – Bosch Video Client – Bosch Recording Station When connected to any of these systems, many of the camera configuration parameters are controlled by the system and not by the settings made via a web browser. Bosch Video Management System The Bosch Video Management System is a unique enterprise IP video surveillance solution tha
Summary of the content on the page No. 18
18 en | Planning FLEXIDOME HD VR 4 Planning 4.1 Unpacking Unpack carefully and handle the equipment with care. The packaging contains: – FLEXIDOME HD VR IP camera – Torx screwdriver bit – Camera mounting kit – Mounting template – RJ45 female-to-female network cable connector – Optical disk –Manuals – Bosch Video Client – Quick install instructions and safety instructions If equipment has been damaged during shipment, repack it in the original packaging and notify the shipping agent or supplier
Summary of the content on the page No. 19
FLEXIDOME HD VR Installation | en 19 5 Installation CAUTION! Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes. 5.1 Parts The camera/housing unit consists of the following parts: 1. Surface Mount Box (some models only) 2. Camera module and mounting base 3. Inner liner 4. Dome cover Bosch Security Systems Installation Manual AM18-Q0637 | v1.1 | 2013.08
Summary of the content on the page No. 20
20 en | Installation FLEXIDOME HD VR 5.2 Mounting the unit 5.2.1 Surface mounting 9.5 mm (0.375 in) 3x 3x PCD 123 mm (4.84 in) To mount the camera on the surface of a wall or ceiling: 1. Use the surface mount box as a template to mark the holes indicated in the drawing. The PCD is 123 mm (4.84 in). 2. Drill three holes with a diameter of 8 mm (0.3 in). 3. Insert the supplied plugs into the holes. 4. Attach the surface mount box securely using the three supplied screws. 5. If you use the side
Summary of the content on the page No. 1
FLEXIDOME HD VR
NIN-733 / NIN-832 / NIN-932
en Installation Manual
Summary of the content on the page No. 2
Summary of the content on the page No. 3
FLEXIDOME HD VR Table of Contents | en 3 Table of Contents 1Safety 6 1.1 Safety precautions 6 1.2 Important safety instructions 7 1.3 Connection in applications 8 1.4 Type label 8 1.5 FCC & ICES compliance 9 1.6 MicroSD cards 10 1.7 UL certification 10 1.8 Bosch notices 11 1.9 Copyrights 12 2 Introduction 13 2.1 Features 13 3 System Information 14 3.1 Network video server 14 3.1.1 Progressive scan 14 3.1.2 True Day/Night function 14 3.1.3 Multiple streams 14 3.1.4 ONVIF (Open Network Video Inter
Summary of the content on the page No. 4
4 en | Table of Contents FLEXIDOME HD VR 5 Installation 19 5.1 Parts 19 5.2 Mounting the unit 20 5.2.1 Surface mounting 20 5.2.2 Flush mount 21 5.3 Connections 22 5.3.1 Make the connections 22 5.4 Mount the camera 25 5.5 Controls 26 5.6 Camera positioning and field-of-view 27 5.6.1 Pan 28 5.6.2 Tilt 28 5.6.3 Twist 29 5.7 Using the install wizard 30 5.7.1 Adjustment procedure 30 5.8 Closing the unit 31 6 Camera configuration 33 6.1 User modes 33 6.2 Day/Night switching 33 7 Browser connection 34
Summary of the content on the page No. 5
FLEXIDOME HD VR Table of Contents | en 5 10.1.1 Dimensions 47 Bosch Security Systems Installation Manual AM18-Q0637 | v1.1 | 2013.08
Summary of the content on the page No. 6
6 en | Safety FLEXIDOME HD VR 1Safety 1.1 Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. WARNING! Medium risk: Indicates a potentially hazardous situation. If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation. If not avoided, thi
Summary of the content on the page No. 7
FLEXIDOME HD VR Safety | en 7 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings on the unit and in the operating instructions before operating the unit. 1. Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners. 2. Do not install unit near any heat sources such as radiators, heaters, stoves, or other equipment that produce heat. Avoid exposure to direct sunlight for long periods.
