Summary of the content on the page No. 1
NETWORK CAMERA
Model:
IK-WB80A
User's Manual
For information on our latest products and peripheral devices, refer to the
following Website:
http://www.toshibasecurity.com
If the URL changes, refer to the Toshiba website (http://www.toshiba.com/).
Summary of the content on the page No. 2
Table of Contents Introduction ������������������������������������������������������������������������������������������������������������������������������������������������������������������ 4 ImportantSafeguards �������������������������������������������������������������������������������������������������������������������������������������������������� 6 NotesonUseandInstallati
Summary of the content on the page No. 3
External Microphone .......................................................................................................................................... 113 Day / Night setting .............................................................................................................................................. 113 Recommended system requirements ................................................................................................................. 113 Specifications ���
Summary of the content on the page No. 4
Introduction FCC (USA)-INFORMATION NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interfere
Summary of the content on the page No. 5
Thank you for purchasing the IK-WB80A Network Camera. Before you start using the camera, read this User's Manual carefully to ensure correct usage. Once you have finished reading this User's Manual, keep it in a convenient place for future reference. The design, specifications, software, and User's Manual contents are subject to change without prior notice. Terms and Trademarks l The term "OS" is used in this manual to indicate operating systems compatible with this product. ® -- Windows
Summary of the content on the page No. 6
Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. Warnings Comply with all warnings on the product and in the user's manual. 4. Follow Instructions Follow all operating and use instructions. 5. Cleaning . Disconnect this camera from the power supply before cleaning 6. Attachments D o not use attachments not recommended by the camera
Summary of the content on the page No. 7
12. Lightning For additional protection on this camera during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This will prevent damage to the camera due to lightning and power- line surges. If lightning occurs, do not touch the unit or any connected cables in order to avoid electric shock. 13. Overloading Do not overload the power supply or extension cords as this can result
Summary of the content on the page No. 8
Important Safeguards (Cont.) CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral
Summary of the content on the page No. 9
Notes on Use and Installation l Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. l Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunction. l Treat the camera with care Dropping or subjecting the camera to intense vibration may cause it to malfunction. l Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near
Summary of the content on the page No. 10
Precautions for Use Disclaimer We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the user in any of the following cases: 1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether intentional or accidental; use under extreme operating conditions. 2. Malfunction or non-function resulting in indirect, additional or consequential damages, including but not limited to loss of expected income and suspension of busine
Summary of the content on the page No. 11
AC Adapter Be sure to use only the supplied AC adapter. Using a different AC adapter may cause the camera to malfunction, heat up, or catch fire. Before using the AC adapter, carefully read and observe the Important Safeguards ( → page 5) and the notes below. ● Plug the AC adapter into the 100-240V AC outlet. If inserting it into other than 100-240V AC outlet, it may result in electric shock or fire hazard. ● Do not repair, modify or disassemble the AC adapter. It may result in electric shock
Summary of the content on the page No. 12
Specifications AC adapter (3A-183WP12) Power source : 100-240V AC 50/60 Hz Rated output : 12V DC, 1.5 A Ambient temperature guaranteed for performance : 32°F to 104°F (0°C to 40°C) Storage temperature : -14°F to 158°F (-10°C to 70°C) Maximum external dimensions : 2.91(L) x 1.71(W) x 1.34(H) inches (74(L) x 43.5(W) x 34(H) mm) Cord length : 68.5 inches (1740 mm) Note The plug of AC adapter is removable. If you detach the pl
Summary of the content on the page No. 13
Package Contents IK-WB80A Sun Shield Kit l l Wrench Tape Rubber Pad l Wall Mount Bracket Kit l Waterproof Connector for RJ45 Ethernet Wall Mount Plate Enclosure Screw and Anchors Kit Wrench l Alignment Sticker / Silica Gel l AC adapter l CD-ROM l Waterproof Connector IK-WB80A l Quick Start Guide and l Warranty Important Safeguards 13
Summary of the content on the page No. 14
Physical Description Lens IR LED Light Sensor SD/SDHC Card Slot NOTE : When inserting an SD card, note the orientation of the contacts. General I/O Terminal Block Reset Button Status LED Power Cord Socket RJ45 Cable General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are described below. Pin Name 1 12V DC Output 2 Digital Output 3 Digital Input 4 Ground 5 AC 24V 1 2 3 4 5 6 7 8 6 AC 2
Summary of the content on the page No. 15
NO TE ● 12V DC is outputted from 1-pin only when connected to a power supply. ● When an AC adapter or PoE is connected, don’t supply AC24V from this terminal. The diagrams below apply when "Digital Input" is used for an alarm input. RS485 connection IK-WB80A Twisted pair line RS485 + Rx + RX - RS485 - Rx + Rx - PTZ driver PTZ scanner 15
Summary of the content on the page No. 16
Status LED The LED indicates the status of the Network Camera. Item LED status Description Steady Red Power on and system booting 1 Red LED unlighted Power off Steady Red + Blink Green every 1 sec. Network works (heartbeat) 2 Steady Red + Green LED unlighted Network fail 3 Steady Red + Blink Green every 2 sec. Audio mute (heartbeat) 4 Blink Red every 0.15 sec. + Blink Green every 1 sec. Upgrading Firmware 5 Blink Red every 0.15 sec. + Blink Green every 0.15 sec. Restore default Hardware Reset
Summary of the content on the page No. 17
SD/SDHC Card and Capacity This network camera is compliant with SDHC 32GB /16GB / 8GB and other preceding standard SD cards for local storage. NO TE ● There is a limit to the number of rewrites that is possible with the SD memory card. Replacing the SD memory card when performing periodic maintenance of the camera is recommended. ● Do not use 512MB and below SD memory cards. ● The Camera system reserves approximately 60MB in SD memory cards. Any images are not recordable on this space. ● Care
Summary of the content on the page No. 18
P A R T I T I O N R E L C I N E K I V E P O W E R C O L L I S I O N 1 2 3 4 5 Installation Hardware Installation Please verify that your product package contains all the accessories listed in the Package Contents listed on page 13. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5. Hardware Installation is shown in the Quick Start Guide(QSG). Please refer to page 12 of the QSG. Network De
Summary of the content on the page No. 19
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192.168.0.3, please forward the following ports for the Network Camera on the router. ■ HTTP port ■ RTSP port ■ RTP port for audio ■ RTCP port for audio ■ RTP port for video ■ RTCP port for video If you have changed the port numbers on the Network page, please open the ports accordingly on your router. For information on how to forward ports on the router, please refer to your router’s user’s manual. 3.
Summary of the content on the page No. 20
Software Installation Installation Wizard (IW), a free-bundled software packaged in the product CD, helps to set up your Network Camera in a LAN. 1. Install the IW under the Software Utility directory from the software CD. Installation Wizard Double click the IW shortcut on your desktop to launch the program. 2. The program will analyze your network environment. After your network environment is analyzed, please click Next to continue the program. 3. The program will search for Network Ca
