Summary of the content on the page No. 1
English
ADS-450
SwannSmart Video Security
M450IPC050411E
1
Summary of the content on the page No. 2
Before You Begin FCC Verification NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, w
Summary of the content on the page No. 3
Contents Before You Begin 2 Interface: Login & Camera List 11 Contents 3 Navigating the Mobile Interface 12 Package Contents 3 Access via the SwannSmart Website 12 Mounting Diagram 4 Interface: Live View 13 Introduction 5 Interface: Events 14 Layout 6 Interface: Camera Settings 15 Local WIFI Configuration: Access 7 SwannSmart App Settings 17 Local WIFI Configuration: Details 8 Expanding Your Service 18 Local WIFI Configuration: Connecting to Internet 9 Technical Specifi
Summary of the content on the page No. 4
Mounting Diagram To permanently mount the camera: • Remove the circular mounting plate from the base of the stand by unscrewing the stand. See the image (right). • Remove the metal ring. Keep it somewhere safe if you think you might need it. Unscrewing the stand. The plastic screw • Take the plastic mounting plate and thread has a tight grip, so it may take a apply it to a wall. Mark the two main little force to unscrew. screw points. • Insert two screws into the wall. If mounting t
Summary of the content on the page No. 5
Introduction Congratulations on your purchase of this ADS-450 camera, the central component of your SwannSmart Video Security system. This camera is versatile, powerful, easy to install and configure and looks pretty stylish, too. Best of all, it can be totally wireless - if there’s a WIFI network your camera can connect to the Internet through, then just connect the camera to power and you’re good to go. You’ll be able to view images from your camera(s) from just about anywhere you can fin
Summary of the content on the page No. 6
Layout Light Sensor Infrared LEDs Lens Microphone LAN Port DC Input Reset Button Local WIFI Configuration Stand Config LED Network LED Power LED 6
Summary of the content on the page No. 7
Local WIFI Configuration: Access To configure the camera via the Local WIFI Configuration mode, you’ll need the following: • Your Android device or iPhone/iPad with the SwannSmart app correctly installed. • An internet connection (other than your mobile device) that the camera can use to connect to the Internet. Local WIFI The camera will act as its own WIFI access point, allowing you to connect directly to the camera from your phone/tablet using the SwannSmart app. All the local configur
Summary of the content on the page No. 8
Local WIFI Configuration: Details You will receive an on-screen message upon starting the app informing you that SwannSmart has detected the camera, asking if you would like to proceed with configuration. Choose Yes to proceed. If you don’t get this message, it indicates that either the camera’s local WIFI is not on, or that your mobile device isn’t properly connected to the local WIFI network. There are two stages to Local WIFI Configuration: • Connecting to the Internet • Configuring Swa
Summary of the content on the page No. 9
Local WIFI Configuration: Connecting to Internet Connect to Internet You’ll need to decide whether you’re using a wireless or a wired network to connect to the Internet. We suggest using the wireless connection as it’s one less cable to worry about - however, wired connections don’t suffer connectivity problems as often as wireless ones and are inherently more secure. Wireless networks: • Select the wireless network of your choice in the list presented onscreen. • If your chosen networ
Summary of the content on the page No. 10
Registering Your Account with SwannSmart To access your ADS-450 via the Internet, you’ll need to setup a SwannSmart account. • Accounts are easy to setup, and it only takes a moment. • You can create an account during the Local WIFI Configuration step, or you can do it via the SwannSmart website. Register an Account during Local WIFI Configuration • You’ll automatically be taken to the Connect to SwannSmart interface once you’ve connected the camera to the Internet. • If you’ve alre
Summary of the content on the page No. 11
Interface: Login & Camera List Logging In Once the camera has been configured and connected to the Internet, and the Local WIFI Configuration switch has been turned OFF, then you’ll be able to login to your account and view images from the camera. Remember: You may need to adjust the WIFI settings on your mobile device - some phones/tablets don’t automatically switch wireless networks when it loses connectivity. To login: • Enter your Username and Password into the fields provided. • Choose
Summary of the content on the page No. 12
Navigating the Mobile Interface The navigation bar gives you access to the various interfaces, camera lists and settings contained within the SwannSmart app. Mine: Opens the list of cameras that are registered to you, as shown in ”Interface: Login & Camera List” on page 11. Friends: Shows a list of friend’s cameras to which they’ve granted you access, as well as “demo” cameras. Events: If you’ve expanded your service to include motion and/or event detection recording, then you’ll be able
Summary of the content on the page No. 13
Interface: Live View The Live View interface is the default interface when you open a camera from the list. The image will always be displayed in landscape mode (where the device is held so that the screen is wider than it is tall). Other modes (such as the Event interface) use a portrait orientation. Icons Exits the camera’s feed and returns you to the camera list. Alters the size of the video. You can stretch an image across the whole screen (as pictured above) or reduce the size to “act
Summary of the content on the page No. 14
Interface: Events Shown here is an example of the Events interface as seen on an iPhone. The Android app will appear slightly different, but is functionally similar. Note that you’ll need to properly configure and upgrade your SwannSmart account before you can access the Event interface. Event List The events recorded are listed here in chronological order. Select an event to begin viewing the recorded slideshow - the number on the right hand side indicates how many images are containe
Summary of the content on the page No. 15
Interface: Camera Settings General Name: The title you’ve selected for the camera during the Local WIFI Configuration stage. Share/Unshare: Whether you want to share access to this camera with other people using SwannSmart. There’s no requirement to share, and - if you choose to do so - you can be very specific about who has access. All users/cameras involved require properly configured SwannSmart accounts to use this feature. Status: Whether the camera is currently detected as being
Summary of the content on the page No. 16
Regular Stream The options listed under Regular Stream will affect the way that images are streamed from the camera over the Internet. These settings will affect both the perceived quality of your images, as well as the bandwidth required to send/receive them. Frame Rate: The number of images per second the camera will send over the Internet. The higher the frame rate, the “smoother” motion in your video will appear. However, high framerates require much more bandwidth than low framerates.
Summary of the content on the page No. 17
SwannSmart App Settings General Version: The version number of the mobile app you’re running. You might need to know this number if you’re in contact with Swann Technical Support - however, if you’ve got auto-updates enabled for your phone/tablet, you should be using the most recent one by default. (The “x”s will be numbers.) About: The release notes and general information for the app. Basically, it’s stuff that we didn’t write here because we didn’t think of it or it hadn’t happened y
Summary of the content on the page No. 18
Expanding Your Service So, you’ve got your ADS-450 connected to the internet, you’ve signed up for your free account and are enjoying the seriously-this-was-like-totally-sci-fi-like-ten-short- years-ago feeling of viewing images from your camera(s) from your phone... but it’s just not enough, eh? Well then: good news, everyone! SwannSmart offers loads of additional services including (but not limited to): • Secure online cloud-based data storage. Never lose a recording or risk missing an ev
Summary of the content on the page No. 19
Warranty Information Swann Communications USA Inc. Swann Communications Swann Communications LTD. 12636 Clark Street Unit 13, 331 Ingles Street, Stag Gates House Santa Fe Springs CA 90670 Port Melbourne Vic 3207 63/64 The Avenue USA SO171XS United Kingdom Limited Warranty Terms & Conditions Swann Communications warrants this product against defects in workmanship and material for a period of one (1) year from its original purchase date. You must present your receipt as proof of date of purcha
Summary of the content on the page No. 20
Swann Technical Support All Countries E-mail: tech@swann.com Telephone Helpdesk Helpdesk / Technical Support Details USA toll free AUSTRALIA toll free 1-800-627-2799 1300 138 324 (Su, 2pm-10pm US PT) (M 9am-5pm AUS ET) (M-Th, 6am-10pm US PT) (Tu-F 1am-5pm AUS ET) (F 6am-2pm US PT) (Sa 1am-9am AUS ET) USA Exchange & Repairs NEW ZEALAND toll free 1-800-627-2799 (Option 1) 0800 479 266 (M-F, 9am-5pm US PT) UK 0203 027 0979 © Swann Communications 2012 20
