Summary of the content on the page No. 1
Wide Dynamic Range
Dome Camera
WDR-D3
200 New Highway
Amityville, NY 11701
631-957-8700
www.specotech.com
Please read this manual thoroughly before operation and keep
it handy for further reference.
Summary of the content on the page No. 2
Summary of the content on the page No. 3
WARNING & CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL._______________ The lighting flash with an arrowhead symbol, within an equilateral triangle is Intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric sh
Summary of the content on the page No. 4
CAMERA INSTALLATION CONNECT POWER CABLE 1. WHEN USING 12 VOLTS DC (constant voltage 600 mA) POWER INPUT:RED CONNECT CENTER:(+) POWER SUPPLY 2. WHEN USING 24 VOLTS AC (40 Volt Amps) POWER RED(+) CONNECT BLACK:(-) POWER SUPPLY 3. CONNECT VIDEO CABLE -CONNECT BNC CABLE TO THE BNC JACK. YELLOW:VIDEO OUT
Summary of the content on the page No. 5
CHAMELEON DOME INSTALLATION 3. If desired, place the Chameleon Dome over the WDR-D3 Push the Chameleon Dome over the WDR-D3 until it snaps into position. ● Notes : If painting is desired, please do so before installation * Painting method on Chameleon Dome * Spray the Chameleon Dome with your desired color * If necessary apply a second coat
Summary of the content on the page No. 6
INTERNAL COMPONENTS 1. Mechanical (2) JOY STICK (1) DC Auto iris 2.8~10mm Lens (1) DC AUTO-IRIS LENS Adjust between T W (TELE WIDE) to set the angle (focal length) Set the focus by adjusting ∞ N NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED INTO POSITION THROUGH THE USE OF "LOCKING HANDLES". (2) JOY STICK TO SET THE OSD (ON SCREEN DISPLAY) , PRESS THE JOY STICK FOR ONE SECOND AND SET AS DESCRIBED IN THE MANUAL
Summary of the content on the page No. 7
2. Joy Stick UP RIGHT LEFT DOWN Push the Joy stick for one second, and the OSD appears on the screen. Move the Joy Stick up, down, left & right to control the OSD functions.
Summary of the content on the page No. 8
1. GENERAL INFORMATION SAFETY PRECAUTION ■ Do not open and modify Do not open the cabinet except during maintenance and installation, as it may be dangerous and cause damage. ■ Do not put objects inside the unit Make sure that no metal objects or flammable substances get inside the camera. It could cause fire, short-circuits or damages. ■ Be careful when handling the unit To prevent damage, do not drop the camera or subject it to strong shock or vibration ■ Install away from electric or magneti
Summary of the content on the page No. 9
3. CAMERA FEATURES PRODUCT FEATURE 1. High Resolution It has 540 lines of horizontal resolution and 460 lines of vertical resolution. (540 HTVL equivalent) 2. Superior Wide Dynamic Image Quality It has very Wide Dynamic Range by using Pixim ORCA Chip Set. Film-like colors are described under various Light conditions even in high dynamic range scenes Dynamic Range is greater then 120 dB. 3. Digital Pixel System Each pixel is processed independently to get clear and usable images. 4. Various Le
Summary of the content on the page No. 10
4. CAMERA SPECIFICATION Signal System NTSC / PAL Pick-up Device 1/3 inch CMOS (dramatically Dynamic range sensor) Total of pixels 742(H) x 552(V) Horizontal Resolution 520 Horizontal TV Lines (color) Scanning System 525 Iines interlaced / 625 Iines interlaced Synchronization Internal / External Video Output 1.0Vp-p/75 ohm Composite Iris Control DC Lens, Video Lens, Manual Lens Sensitivity 0.08Lux (DSS on) with F1.2 Lens S/N Ratio 48dB or more Dynamic range 120dB(max), 95dB(
Summary of the content on the page No. 11
5. MENU AND SETTING DETAILS MAIN MENU SET UP ID DISPLAY ID:ON or OFF CAMERA ID : 8 CHARACTER ID POSITION : UP-LEFT or UP-CENTER or UP-RIGHT DOWN-LEFT or DOWN-CENTER or DOWN-RIGHT RES : CCD-HIGH or CCD-NORMAL PIXIM-HIGH or PIXIM-NORMAL LENS MANUAL DC : LEVEL (Range 0~255) WDR MANUAL(Range -20 to 20) AUTO WB CONTROL ATW(Range 2K~11K) AWB MANUAL(Range 2K ~11K) AGC CONTROL OFF ON(Range 0 ~ 60) LOW LIGHT SLOW SHUTTER(Range OFF~X32) AUTO D/N SPECIAL VIDEO(NTSC/PAL) FLIP(ON/OFF) SYNC(INT/INT2/L,LOCK) B
Summary of the content on the page No. 12
OSD MENU CONTROL CENTER KEY - Used to access the menu mode, Also used to confirm the setting UP / DOWN KEY - Used to choose the desired menu selection. LEFT / RIGHT KEY - Used to choose the desired menu feature adjustment. OSD MENU ENTER / EXIT A. OSD MENU ENTER • Push Center Key for 2 seconds B. OSD MENU EXIT • Press EXIT Menu from Main Menu • If Pressing Set Key for 2 seconds from Main Menu appears. In this case, just press Set Key. C. 'SAVE' and 'QUIT‘ • Left or Right Key - Selecting Menu • U
Summary of the content on the page No. 13
E. WB CONTROL • ATW (Auto Tracking White Balance) : The camera automatically control the white balance in any environment. • AWB (Auto White Balance) : The white balance is automatically adjusted in a specific environment. • MANUAL : Users can adjust the colors by adding or reducing the WB level. You can adjust the desired WB level from 2K to 11K F. AGC • ON : Activate automatic gain control feature. You can adjust the desired AGC level from 0 to 60dB. • OFF : Deactivate automatic gain control
Summary of the content on the page No. 14
DIMENSIONS * SIDE VIEW : WDR-D3 * TOP VIEW : WDR-D3 120.00 80.00 180.00 150.00
Summary of the content on the page No. 15
WARRANTY
Summary of the content on the page No. 16
200 New Highway Amityville, NY 11701 631-957-8700 www.specotech.com
