Summary of the content on the page No. 1
SALES NETWORK
• • HIGH RESOLUTION DAY&NIGHT
SAMSUNG TECHWIN CO., LTD. SAMSUNG OPTO-ELECTRONICS UK, LTD.
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Samsung House, 1000 Hillswood Drive, Hillswood Business
Gyeonggi-do 462-703, Korea Park Chertsey, Surrey KT16 OPS THREE-AXIS V/F LENS DOME CAMERA
TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145 TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
• SAMSUNG OPTO-ELECTRONICS AMERICA,INC. • TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
INSTRUCTION
Summary of the content on the page No. 2
Thank you for purchasing a SAMSUNG DOME CAMERA. Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description. SID-452 SERIES • NTSC MODELS • PAL MODELS SID-452N SID-452P The lightning flash with an arrowhead symbol, within an equilateral triangle is MODEL DESCRIPTION intended to alert the user to the presence of uninsulated “dangerous voltage” • SID-452X _ within the produ
Summary of the content on the page No. 3
Contents 6 20 Features Camera Operation Menu 20 Settings 21 8 Precautions • LENS (Adjusting to the brightness level) 22 • SHUTTER (condition and speed control) 23 • WHITE BALANCE control 24 10 Composition • BACKLIGHT (Backlight Compensation) 25 • AGC (Auto Gain Control) 26 11 Name and Function of Each Section • SSNR (Samsung Super Noise reduction) 27 28 • SENS-UP 29 13 • SPECIAL Installation • EXIT 34 Installation 13 15 Adjust the panning and tilting, rotating while watching the monitor 35 Troub
Summary of the content on the page No. 4
Features Warning The camera needs periodic inspection. Built-in Auto Iris Vari-Focal Lens. High Sensitivity Contact an authorized technician for inspection. The focal length of lens is 3 to 9 mm(F 1.2), The built-in high sensitivity COLOR CCD enables Equivalent to 3X zoom. The built-in lens allow a clear image even in 0.002Lux (Sens-Up) the camera to have wider dynamic range, illumination. therefore you can use in various applications. Stop using your camera when you find a malfunction. SSNR (S
Summary of the content on the page No. 5
Precautions Installation of the camera should be Stop use immediately if smoke or Do not install the camera in locations Do not install the camera in performed by qualified service personnel only. unusual heat is detected in the camera. subject to extreme temperature conditions. unstable lighting conditions. As installation of the camera requires experience and It may result in fire. Only use the camera in conditions where Severe changes in lighting, or flickering, skill, installation without th
Summary of the content on the page No. 6
Composition Name and Function of Each Section 1. SID-452 2. Instruction Manual 3. M4 Tapping Screws 4EA 4. M4 Machine Screws 4EA Pan Base control panning angle of camera 5. Adapter plate Rotate Base Holding Screw fix rotated position Rotate Base control rotating angle of camera COLOR DOME CAMERA User’s Manual COLOR DOME CAMERA User’s Manual 10 11
Summary of the content on the page No. 7
Name and Function of Each Section Installation Pan Base Holding Screws (Color : Silver) Installation fix panned position Zoom Handle Notes adjust zoom between WIDE and TELE • The installation should be done by qualified service personnel or sysytem installers. Focus Handle • If the ceiling material is not strong enough to hold the installation screws, the camera may after adjusting zoom, adjust focus fall off. Reinforce the ceiling as needed. SETUP button Used for the menu display. Confirm the s
Summary of the content on the page No. 8
Installation Adjust the panning and tilting, rotating while watching the monitor When installing on a adapter plate 1) Place the bracket provided on the installation 73˚ An arrow for installing directions surface and fix it with the M4 tapping 145˚ 195˚ adapter plate screws (provided).(Select either 85X85 or 170˚ Tilt Base 83.5X46) 2) When placing the camera body on the plate, insert the plate pin into the Rotate Base mounting hole on the body as shown in figure-1 and fix it by turning clockw
Summary of the content on the page No. 9
Installation Adjusting varifocal lens zoom and focus Notes • When adjusting the rotating angle, loosen rotate base holding screw as following Figure 1) Unlock the zoom (or the focus) handle to release it A. And then tighten it again. 2) Adjust the zoom (or the focus) handle by moving it to WIDE (NEAR) or TELE • When adjusting the tilting angle, just grip the tilt base and adjust tilting angle. (FAR) position. • When adjusting the panning angle, loosen pan base holding screws as the following 3)
Summary of the content on the page No. 10
Connection Connecting to a Monitor Connecting to Power Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. Connect the adaptor to the power input connector as shown in the figure below. The recommended adaptor specification for SID-452N/SID-452P is AC24V, 300mA. CCTV Camera Monitor • As the connecting method varies with the instruments, refer to the manual supplied with the instrument. When the resistance value of copper wire is at [20°C(68°F)] • If necessary, you can connect the monit
Summary of the content on the page No. 11
Camera Operation Menu Settings Settings can be made using the 5 buttons located on the back of the camera. SETUP menu LENS (Adjusting to a lens) · DC SHUTTER (Conditon and speed control) · FLK WHITE BALANCE control · ATW · AWC · MANUAL · OFF · LOW · MIDDLE BACKLIGHT (Backlight compensation) SETUP button DOWN button · HIGH LEFT button RIGHT button UP button AGC (Auto Gain Control) · OFF · LOW · MIDDLE 1. Please press the SETUP button · HIGH • Settings can now be made. The SETUP menu is dis
Summary of the content on the page No. 12
Camera Operation 2. Using the SETUP button, you can control the brightness of the screen. Select any function you Modes can be changed wish to operate by Notes using the LEFT and using the UP and RIGHT buttons. DOWN buttons. • The brightness of the screen can be adjusted within the range of 1~70. The optimum level of brightness for the user can be achieved by adjustment. 3. Please press the LEFT or RIGHT button if you wish to change mode. • When the LEFT or RIGHT button is pressed, available v
Summary of the content on the page No. 13
Camera Operation WHITE BALANCE control BACKLIGHT (Backlight Compensation) The screen color can be adjusted by using the WHITE BALANCE function. When there is a strong backlight behind the object, clear images of the background 1. Please position the arrow to point to 'WHITE BAL' on the SETUP menu by as well as the object can still be obtained by using the BACKLIGHT function. using the UP and DOWN buttons. 1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by 2. Please select
Summary of the content on the page No. 14
Camera Operation AGC (Auto Gain Control) SSNR (Samsung Super Noise reduction) 1. Please position the arrow to point to 'AGC' on the SETUP menu by using the The background noise in the low light level decreases automatically as the level UP and DOWN buttons. of gain changes. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT 1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the button. As the level of gain increases, the screen gets brighter and
Summary of the content on the page No. 15
Camera Operation SENS-UP (Low illuminance) SPECIAL SENS-UP helps maintain a bright, clear screen image by automatically detecting 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using changes in the level of light in low light level conditions. the UP and DOWN buttons. 1. Please position the arrow to point to 'SENS-UP' on the SETUP menu by 2. Please select the mode you wish to operate by pressing the UP or DOWN using the UP and DOWN buttons. button. 2. Please select the m
Summary of the content on the page No. 16
Camera Operation 3) Please press the SETUP button. 5) When a name has been chosen, please select a position for the name display. Please move the cursor onto 'POS' and then press the SETUP button. Camera ID ABCDEFGHIJKLM Camera ID NOPQRSTUVWXYZ ABCDEFGHIJKLM abcdefghijklm NOPQRSTUVWXYZ nopqrstuvwxyz abcdefghijklm -. 123456789 nopqrstuvwxyz CLR POS END -. 123456789 CLR POS END 4) Up to 15 letters can be used for the ID. Please move the cursor to the letter you wish to choose by using the UP
Summary of the content on the page No. 17
Camera Operation • Please select the area you wish to observe from the 4 areas in AREA SEL mode. Notes • Please select ON mode for the chosen area. •If AGC is OFF, you can’t select AUTO mode. • Please adjust the size of the area to be observed by using the UP, DOWN, LEFT •When an infrared light is used, there may be a problem with focusing and COLOR or RIGHT button. (DAY & NIGHT). SYNC : Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL LINE-LOCK. In LINE-LOCK mode, it synchronizes t
Summary of the content on the page No. 18
Camera Operation Troubleshooting MIRROR If you have trouble operating your camera, refer to the following table. If the - ON : Sets a horizontal image inversion. guidelines do not enable you to solve the problem, contact an authorized - OFF : Cancels the inversion. technician. Problem Solution • Please check the power connection. Nothing appears on • Please check the video signal line connection. the screen. • Please check the Brightness of Auto Iris lens. MIRROR ON MIRROR OFF • Please
Summary of the content on the page No. 19
Troubleshooting Specifications ITEM SID-452N SID-452P Problem Solution POWER AC24V ±10%/DC12V ±10% Max3.0W The MOTION • Please check if 'MOTION DETECTION' mode is Total Pixels 811(H) x 508(V) 795(H) x 596(V) C DETECTION function turned on. C Effective Pixels 768(H) x 494(V) 752(H) x 582(V) D is not working. • Please check if the MD LEVEL is too low. Sensor 1/3 inch Super HAD CCD • Please check the setting of the MD AREA. S Scanning System
Summary of the content on the page No. 20
DECLARATION OF CONFORMITY Dimension Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD Ø130 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address 105mm Equipment Type/Environment CCTV Camera Model Name SID-452P Beginning Serial NO. S6020001 Year of Manufacture 2006. 02. 01 Conformance to EN 50081-1 : 1992 EMC-Directive 89/336 EEC and 92/31/EE
