Summary of the content on the page No. 1
SCC-C4237P
SCC-C4337P
SCC-C4239P
SCC-C4339P
Power Zoom Camera
User Manual
imagine the possibilities
Thanks you for purchasing this Samsung product.
To receive a more complete service, please visit
our website
www.samsungsecurity.com
S SCC-C4239P-TRK-ENG.indd 1 CC-C4239P-TRK-ENG.indd 1 2 2009-10-9 9:28:54 009-10-9 9:28:54
Summary of the content on the page No. 2
overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. WARNING To reduce the risk of fi re or electri
Summary of the content on the page No. 3
English fi re or electric shock. 8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fi re or electric shock. 9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) 10
Summary of the content on the page No. 4
overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi ers) that produce heat. 9. Do not defeat the safety purpose of the p
Summary of the content on the page No. 5
English CONTENTS 4 Important Safety Instructions OVERVIEW 5 Contents 6 Features 7 What’s Included 2 7 Part Names and Functions 11 Preparing Installation INSTALLATION & 11 Connecting the Cables CONNECTION 11 14 Main Menu SETUP 15 Profi le 17 Camera Set 26 Intelligent Video 14 28 Privacy Zone 29 Preset 30 Other Set 31 Communication 31 System Info 32 Language 33 Shortcut Keys APPENDIX 34 Specifi cations 33 English _5 S SCC-C4239P-TRK-ENG.indd 5 CC-C4239P-TRK-ENG.indd 5 2 2009-10-9 9:31:44 009-
Summary of the content on the page No. 6
overview FEATURES With the state-of-the-art digital signal processing technology, full digital image processing and special algorithm of 600-line high resolution implemented. High Sensitivity: It implements images of high sensitivity using the up-to-date Super- HAD IT CCD(SCC-C4237P/C4337P)/ExView-HAD PS CCD(SCC-C4239P/C4339P). VPS(Virtual Progressive Scan): This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality recording and fi le tra
Summary of the content on the page No. 7
English WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Camera Holder Camera (Mount Adaptor) User's Manual 2 Screws PART NAMES AND FUNCTIONS SIDE VIEW Mount Adapter Fixing Grooves Camera Lens Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have M applied ethanol. English _7 S SCC-C4239P-TRK-ENG.indd 7 CC-C4239P-TRK-ENG.indd 7 2 2009-10-9 9:31:45 009-10-9 9:31:45
Summary of the content on the page No. 8
overview Rear Panel SCC-C4337P SCC-C4339P SCC-C4237P SCC-C4239P Input/Output Connector This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals. SCC-C4239P/C4339P SCC-C4237P/C4337P 8_ overview S SCC-C4239P-TRK-ENG.indd 8 CC-C4239P-TRK-ENG.indd 8 2 2009-10-9 9:31:45 009-10-9 9:31:45
Summary of the content on the page No. 9
English 1. ALARM OUT Alarm out jack for motion detection. (Open Collector, On Gnd) 2. GND Grounding jack. 3. TRIGGER IN (SCC-C4239P/C4339P) Displays the current still image when it receives the Trigger signal. (Normal Open Type) 4.5.6 FOCUS, COM, ZOOM This port is used for ZOOM/FOCUS, MENU CONTROL, HOME RETURN, and ONEAF by using an external controller. Depending on the input condition, 4 modes, A, B, C, and D are available. (SPECIAL - CTRL TYPE) (Operation Voltage Range : +3V~+13V, -3V~-13V)
Summary of the content on the page No. 10
* 2 : For short voltage supply during MENU OFF, executes ONEAF and for more than 2 second * 3 : For more than 2 second long voltage supply, moves to the PRESET 0(HOME) position. 7. 5V OUT Power supply jack for RS-485 JIG. Use within typical DC +5V 100mA. 8. DAY/NIGHT IN This is a function to receive the external DAY/NIGHT signal from the sensor(option) and convert the signal into BW. 9. RS-485 DATA- Jack for connection to RS-485 DATA- signal line. 10. RS-485 DATA+ Jack for connection to RS-
Summary of the content on the page No. 11
English installation & connection PREPARING INSTALLATION To install and use the camera, fi rst prepare the following cables. POWER ADAPTER CABLE (SOLD SEPARATELY) The requirements for the power adapter, which connects to the camera’s POWER IN terminal, are as follows: - SCC-C4237P/C4239P : DC 12V 600mA - SCC-C4337P/C4339P: AC 24V 300mA DC 12V 600mA VIDEO CABLE(SOLD SEPARATELY) Use a BNC cable, such as the one shown below, to connect the camera’s VIDEO OUT to the monitor
Summary of the content on the page No. 12
1 2 3 4 5 6 7 8 COM ZOOM FOCUS 1. ALARAM OUT 5. 2. GND 6. 3. TRIGGER IN 7. 5V OUT 4. 8. DAY/NIGHT IN installation & connection Video In Terminal of Monitor Rear Surface BNC cable(not included) Video Out Terminal 3. Plug in the power adapter(not inlcluded). Use a “minus” screwdriver to connect one part of the power adapter, which consists of two lines, to the POWER terminal of the camera as follows : +12V GND SCC-C4237(P)/C4239(P) SCC-C4337(P)/C4339(P) 12_ installation & connection S SCC-C4239
Summary of the content on the page No. 13
English 4. Determine the type of power supply and set the POWER SELECTION switch accordingly. Next, plug the power adapter into a wall outlet. 5. If the camera operates normally, the following screen will be displayed for 5 seconds and then disappears. SYSTEM INFO TYPE 4_34 TYPE 4_34 ZOM_WDR_P ZOM_WDR_P PROT PROTOOCOL COL SAMSUNG SAMSUNG AADDRESS 0 DDRESS 0 CCOMM.TYPE RS485,HALF OMM.TYPE RS485,HALF BAUD RA BAUD RATE TE 9600 9600 CAMERA CAMERA VER. VER. V1.00_090817 V1.00_090817 LLENS O
Summary of the content on the page No. 14
setup Using OSD icons : If these icons appear in the left and right corner of a menu item, you can use ◄► them move to the previous or next menu. (EXIT): Exits the menu setup screen. Before exiting the setup screen, select to save your settings to the whole menus, or to cancel them. (RET): Saves your settings and returns to the previous screen. (HOME): Returns to the main menu. (SAVE): Use this icon if you want to save your settings after you specifi ed the mask area a
Summary of the content on the page No. 15
English COMMUNICATION Confi gures the settings pertaining to RS-485 communication. SYSTEM INFO Shows the system information such as the camera version or communication settings. LANGUAGE Select a preferred one from the supported languages. PROFILE You can select one from the pre-determined confi gurations as appropriate to your specifi c camera installation environment. Your selection on each item in PROFILE will affect all other settings of the camera. STANDARD Automatically optimizes the ca
Summary of the content on the page No. 16
setup CAMERA SETUP MENU STANDARD ITS BACKLIGHT DAY/NIGHT GAMING Parent Menu Sub-menus VPS OFF ON OFF OFF OFF ALC ALC ALC ALC ALC ALC ---- - LEVEL 0000 0 BACKLIGHT OFF OFF WDR OFF OFF IRIS WDR ---- - WEIGHT Custom Setting Custom Setting MEDIUM Custom Setting Custom Setting WDR LEVEL Custom Setting Custom Setting 0 Custom Setting Custom Setting WHITE BAL Custom Setting Custom Setting Custom Setting Custom Setting Custom Setting (F.FAST) (F.FAST) (F.FAST) NORM SLOW MOTION --- --- --- MEDIUM MEDIUM
Summary of the content on the page No. 17
English CAMERA SET You can confi gure the general settings of the camera module. 1. Select - . The Camera Setup menu appears. CAMERA SET C CAMERA AMERA ID ID OFF OFF 2. Change the settings as necessary, or VVPS OFF PS OFF select an item to check. IRIS ALC IRIS ALC MOTION (F MOTION (F..F FAAST) ST) - --- -- DNR MID DNR MID SSHUTTER (OFF) HUTTER (OFF) --- --- SENS-UP SENS-UP AUT AUTO O X4 X4 FLICKERLESS OFF FLICKERLESS OFF XDR MID XDR MID CAMERA ID Provide the ID and
Summary of the content on the page No. 18
setup IRIS The IRIS menu is useful if you set to adjust the A ALC LC intensity of radiation incoming to the camera. [ ] LEVEL 00 ----I---- ALC : Adjust the open and close of the iris. BACKLIGHT BLC BACKLIGHT BLC A AREA REA U USER SER - LEVEL : Select an overall brightness level. < SIZE> < TION> - BLC : With set to , you can specify the BLC area. With AREA set to , you can spec- ify the position and size. - WDR : If you set
Summary of the content on the page No. 19
English AGC With this, you can adjust the AGC level of a C CAMERA AMERA SET SET camera. C CAMERA AMERA ID ID OFF OFF With AGC active, if the signal strength falls V VPS PS O OFF FF IIRIS ALC RIS ALC below the standard level, AGC will amplify the AGC (VERY HIGH) --- video signal to automatically improve the DDNR MID NR MID sensitivity. S SHUTTER HUTTER OFF OFF If is set to or S SENS-UP ENS-UP O OFF FF FLICKERLESS FLICKERLESS OFF OFF mode, the menu
Summary of the content on the page No. 20
setup SHUTTER You can select a fi xed fast electronic shutter CAMERA CAMERA SET SET speed in 7 options ranging from 1/120 to 1/10k, CAMERA CAMERA ID ID OFF OFF V VPS PS OFF OFF which is mostly used to take a picture of a fast IIRIS ALC RIS ALC moving object. AAGC (VER GC (VERY Y HHIGH) IGH) - --- -- DDNR MID NR MID As long as SENSE UP is set to AUTO, FIXED / SHUTTER 1/120 FLICKERLESS to ON / BACKLIGHT to WDR, the SENS-UP SENS-UP ( (OFF OFF) ) - --- -- SHUTTER menu is not availab
